Overclock.net › Forums › Components › Memory › G.SKILL Trident X Series 2400 OC to 2600
New Posts  All Forums:Forum Nav:

G.SKILL Trident X Series 2400 OC to 2600

post #1 of 3
Thread Starter 
I have G.SKILL Trident X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-2400C10D-16GTX and working fine at 2400.I want to see if I can get it to run at 2600.My I5 3570k oc is 4.5 with 1.20 core volts and its in a Asus Sabertooth mb. For the 2400 I have now I run 10 10 12 24 1T 1.65 V and 1.0000 vccsa. If anyone has any settings I could try for 2600 please post. Thanks....
post #2 of 3
You just have to experiment since no two systems or components are alike. Try upping the voltage to 1.7v for the RAM and raising each major timing by one notch from the stock XMP speeds. Reboot and see what happens.
post #3 of 3
You might as well start with 11-13-13 and 1.7V but chances are you're not going to get that kit stable at 1300MHz. Not the platform's fault, just that Samsung 4Gbit ICs are known to hit a "wall" at 1250MHz or so.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › G.SKILL Trident X Series 2400 OC to 2600