Overclock.net › Forums › Cooling › Water Cooling › Bitfenix Recon questions
New Posts  All Forums:Forum Nav:

Bitfenix Recon questions

post #1 of 5
Thread Starter 
Couple of questions, here goes :

It says 10w per channel. Is that enough for at least 2 fans on a channel?

On each channel, can you separately choose whether you want it to be auto and manual. i.e auto on channel 1 and manual on channel 2

On auto mode, I know there is a threshold for when the rpm ramps up ( someone clarify for me, I'm not too sure ) but is it proportional to the alarm temp.
So... the max rpm on a fan is 1200 and the temp of the water is 32o. I want to make it spin 1200 at 40o and 50% at 36
post #2 of 5
10W is enough to control two fans. You could probably even get away with 3 or 4 depending on the fan. Look up the current rating for the fans you plan on using and find out how many watts they will use by using the following equation: wattage=current*voltage.(Remember to take start up current into account as well)

I'm not too familiar with that fan controller, but if it's anything like my Lamptron Touch, then you can set auto or manual to individual channels.

Again, if the Recon is like my Touch, then once the temperature threshold is met, the fans ramp up to 100%. But that may be different with the Recon.
Edited by morencyam - 4/8/14 at 3:42pm
BlackOut
(13 items)
 
Living Room HTPC
(11 items)
 
Bedroom HTPC
(8 items)
 
CPUMotherboardGraphicsRAM
Core i5 4670K Gigabyte Z97N-WiFi Zotac GTX 980 ti Reference 16gb Hyper X 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Raijintek EreBoss Core Edition  Win10 Pro x64  LG 29UM57-P 
KeyboardPowerCaseMouse
CM Storm QuickFire TK w/ MX Browns Silverstone Strider Platinum 550 Raijintek Styx Logitech G700 
CPUMotherboardGraphicsRAM
Intel Core i3 2100 Intel DH61BEB3 mATX XFX 6670 2GB 8gb GSkill Ares DDR3-1600 
Hard DriveHard DriveCoolingOS
SanDisk SSD Plus 120gb SSD Seagate Barracuda 2TB Arctic Freezer 11 LP Win7 Ultimate x64 
MonitorPowerCase
47" LED TV Corsair CX430 SilverStone Grandia GD05B HTPC  
CPUMotherboardGraphicsRAM
Intel Core 2 Duo E8400 MSI G41TM-E43 GT 610 2GB Corsair DDR2 
Hard DriveHard DriveCoolingOS
64GB Crucial C300 WD Green 500GB Coolermaster Hyper TX3 Win7 Ultimate x64 
  hide details  
Reply
BlackOut
(13 items)
 
Living Room HTPC
(11 items)
 
Bedroom HTPC
(8 items)
 
CPUMotherboardGraphicsRAM
Core i5 4670K Gigabyte Z97N-WiFi Zotac GTX 980 ti Reference 16gb Hyper X 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Raijintek EreBoss Core Edition  Win10 Pro x64  LG 29UM57-P 
KeyboardPowerCaseMouse
CM Storm QuickFire TK w/ MX Browns Silverstone Strider Platinum 550 Raijintek Styx Logitech G700 
CPUMotherboardGraphicsRAM
Intel Core i3 2100 Intel DH61BEB3 mATX XFX 6670 2GB 8gb GSkill Ares DDR3-1600 
Hard DriveHard DriveCoolingOS
SanDisk SSD Plus 120gb SSD Seagate Barracuda 2TB Arctic Freezer 11 LP Win7 Ultimate x64 
MonitorPowerCase
47" LED TV Corsair CX430 SilverStone Grandia GD05B HTPC  
CPUMotherboardGraphicsRAM
Intel Core 2 Duo E8400 MSI G41TM-E43 GT 610 2GB Corsair DDR2 
Hard DriveHard DriveCoolingOS
64GB Crucial C300 WD Green 500GB Coolermaster Hyper TX3 Win7 Ultimate x64 
  hide details  
Reply
post #3 of 5
Quote:
Originally Posted by JackieTran View Post

Couple of questions, here goes :

It says 10w per channel. Is that enough for at least 2 fans on a channel?

On each channel, can you separately choose whether you want it to be auto and manual. i.e auto on channel 1 and manual on channel 2

On auto mode, I know there is a threshold for when the rpm ramps up ( someone clarify for me, I'm not too sure ) but is it proportional to the alarm temp.
So... the max rpm on a fan is 1200 and the temp of the water is 32o. I want to make it spin 1200 at 40o and 50% at 36

The number of fans you can put on each channel depends on the power draw of the fans used. I put 3 SP120 performance edn on each channel just fine. Lower speed and power fans, you could fit more of on. Higher power, less.

The Auto mode on the Recon is very basic. When the sensor of a channel hits the alarm temp it just ramps up the fans to full power til the temp drops back under the alarm setting. It is not proportional at all.

The only digital controller I know of that uses a proportional fan curve based on a set temp is the CW611. It uses a set curve from the set temp up to +10C above set temp.
Most others use the simple type of control like the Recon.

Each channel can be set to auto and manual control individually.

The Recon does however allow you to use software to control fans because it uses a USB connection. There is an open source program called Pheobetria that lets you set your own temp based fan curves, link multiple channels to a single temp sensor, and name channels.
http://www.phoebetria.com/
Edited by Jakusonfire - 4/8/14 at 11:43pm
Kusanagi
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC Corsair Vengeance Pro CMY16GX3M2A2133C11 16GB 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 256GB X2 EK Supremacy Aqua Computer Aquaero 6 Pro Aqua Computer D5 USB 
CoolingCoolingCoolingCooling
Aquacomputer MPS 400 flow meter EK-CoolStream PE 360 EK-Coolstream PE 240 Noiseblocker Eloop B12-PS 
CoolingCoolingCoolingCooling
EK Vardar F2 EK-FC Titan Acetal & Nickel EK-RAM Monarch X4 Clean CSQ - Acetal+Nickel EK-D5 X-RES 140 CSQ 
OSMonitorMonitorPower
Win 8.1 Pro 64 bit Samsung S27A750d LG E2290V-SN Silverstone Strider Plus 850W ST85F-P 
Case
Corsair Obsidian 750D 
  hide details  
Reply
Kusanagi
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC Corsair Vengeance Pro CMY16GX3M2A2133C11 16GB 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 256GB X2 EK Supremacy Aqua Computer Aquaero 6 Pro Aqua Computer D5 USB 
CoolingCoolingCoolingCooling
Aquacomputer MPS 400 flow meter EK-CoolStream PE 360 EK-Coolstream PE 240 Noiseblocker Eloop B12-PS 
CoolingCoolingCoolingCooling
EK Vardar F2 EK-FC Titan Acetal & Nickel EK-RAM Monarch X4 Clean CSQ - Acetal+Nickel EK-D5 X-RES 140 CSQ 
OSMonitorMonitorPower
Win 8.1 Pro 64 bit Samsung S27A750d LG E2290V-SN Silverstone Strider Plus 850W ST85F-P 
Case
Corsair Obsidian 750D 
  hide details  
Reply
post #4 of 5
Thread Starter 
Thanks, I'll probably buy one then.

So the lamptron fc5 has 30w per channel... That mudt be able to power a heckload of fans
post #5 of 5
It depends on the fans. The lower the operating and statup current, the more fans you can run per channel. I have no problem running 6 Gentle Typhoons on a single channel on my Lamptron Touch, which is also 30W per channel
BlackOut
(13 items)
 
Living Room HTPC
(11 items)
 
Bedroom HTPC
(8 items)
 
CPUMotherboardGraphicsRAM
Core i5 4670K Gigabyte Z97N-WiFi Zotac GTX 980 ti Reference 16gb Hyper X 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Raijintek EreBoss Core Edition  Win10 Pro x64  LG 29UM57-P 
KeyboardPowerCaseMouse
CM Storm QuickFire TK w/ MX Browns Silverstone Strider Platinum 550 Raijintek Styx Logitech G700 
CPUMotherboardGraphicsRAM
Intel Core i3 2100 Intel DH61BEB3 mATX XFX 6670 2GB 8gb GSkill Ares DDR3-1600 
Hard DriveHard DriveCoolingOS
SanDisk SSD Plus 120gb SSD Seagate Barracuda 2TB Arctic Freezer 11 LP Win7 Ultimate x64 
MonitorPowerCase
47" LED TV Corsair CX430 SilverStone Grandia GD05B HTPC  
CPUMotherboardGraphicsRAM
Intel Core 2 Duo E8400 MSI G41TM-E43 GT 610 2GB Corsair DDR2 
Hard DriveHard DriveCoolingOS
64GB Crucial C300 WD Green 500GB Coolermaster Hyper TX3 Win7 Ultimate x64 
  hide details  
Reply
BlackOut
(13 items)
 
Living Room HTPC
(11 items)
 
Bedroom HTPC
(8 items)
 
CPUMotherboardGraphicsRAM
Core i5 4670K Gigabyte Z97N-WiFi Zotac GTX 980 ti Reference 16gb Hyper X 
Hard DriveCoolingOSMonitor
Samsung 830 256gb Raijintek EreBoss Core Edition  Win10 Pro x64  LG 29UM57-P 
KeyboardPowerCaseMouse
CM Storm QuickFire TK w/ MX Browns Silverstone Strider Platinum 550 Raijintek Styx Logitech G700 
CPUMotherboardGraphicsRAM
Intel Core i3 2100 Intel DH61BEB3 mATX XFX 6670 2GB 8gb GSkill Ares DDR3-1600 
Hard DriveHard DriveCoolingOS
SanDisk SSD Plus 120gb SSD Seagate Barracuda 2TB Arctic Freezer 11 LP Win7 Ultimate x64 
MonitorPowerCase
47" LED TV Corsair CX430 SilverStone Grandia GD05B HTPC  
CPUMotherboardGraphicsRAM
Intel Core 2 Duo E8400 MSI G41TM-E43 GT 610 2GB Corsair DDR2 
Hard DriveHard DriveCoolingOS
64GB Crucial C300 WD Green 500GB Coolermaster Hyper TX3 Win7 Ultimate x64 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Bitfenix Recon questions