Overclock.net › Forums › Cooling › Water Cooling › XSPC Twin D5 Dual Bay Res/Pump length?
New Posts  All Forums:Forum Nav:

XSPC Twin D5 Dual Bay Res/Pump length?

post #1 of 2
Thread Starter 
I'm still taking preliminary measurements for my build. I want to run a 5.25" res/pump bay combo with dual D5 pumps. First I was set on the Koolance RP-452X2, but it seems the length might be too long and hit my top 120 triple radiator.

Then I looked at the XSPC Twin D5 Dual Bay res/pump combo. Their listed specs are:
149 x 63 x 85.6mm
or
5.866 x 2.48031 x 3.37008in

But that is probably before pumps are installed. Since pumps sit sideways in this reservoir, the unit will be longer. Does anyone know how long the unit will be once the two MCP655's are installed? redface.gif
post #2 of 2
The XSPC dual bay res with dual D5's has the pumps mounted on the lower part of the res. The upper part goes back in the case about 70mm and the pumps are about 100mm. back from the front face. I have a 360 top mount in a haf932 and plenty of room with this bay mount at the very top 2 bays.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › XSPC Twin D5 Dual Bay Res/Pump length?