Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] Megatron 2.0 - New to OC.net - New to Overclocking
New Posts  All Forums:Forum Nav:

[Build Log] Megatron 2.0 - New to OC.net - New to Overclocking - Page 2

post #11 of 13
Rig looks awesome! Welcome to OCN!
post #12 of 13
Thread Starter 
Cables came in! Ensourced Custom Sleeved Cables! This guy is great. Cables are super tight and easy to work with. I followed the "Frank N Stein" style of cable stitching. Very easy to follow and a great 4 video guide on youtube. Took about 10 min to do the first row following the guide then about 5 min for each one after that. The only hard part is keeping the wires taunt. Here is a preview.


Easier to see the stitching with the flash on.

Not too shabby, it definitely helps keep this in place lol.

Also started to mess around with the LED's however I am already worried that there light angle width thingy is going to be too wide and there not going to be bright enough to achieve the desired effect. I want to add that my hands are so unsteady. Been quite the learning experience with soldering, wiring, etc...


Adding the holes with a drimmel was a synch.


The lights were too long so I used hot glue and it seems to be working perfectly. However it gets everywhere


Good thing razor blades get up hot glue easy.


Wires were pretty long. Just snipping them down


Soldering skills are def beginner level.
post #13 of 13
Thread Starter 
Couldn't wait. Did some initial overclocking. Got it up to 4.7 at 1.4v and jumping around from 28Cto 30C. Stopping for the evening then I will work on the cards and ram tomorrow. Hopefully hit 5 by tomorrow evening.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] Megatron 2.0 - New to OC.net - New to Overclocking