Overclock.net › Forums › Cooling › Water Cooling › EK Waterblock bridge issue
New Posts  All Forums:Forum Nav:

EK Waterblock bridge issue

post #1 of 4
Thread Starter 
So I have an interesting issue. I have two Asus DCII 780 gpus. I started my loop by adding only one card to it. Picked up the Nickel EK block. No problem. Then I found a great deal for a CSQ block in ebay which was brand new. Couldn't resist. I didn't do my research and I found that they connect differently. I got a FC Link CSQ bridge only to realize the don't attach the same way. Anyone have a proper solution to this?

I have them bridged right now, using my own ingenuity. But it looks less than presentable and it semi flow restrictive.

Any help is appreciated!
post #2 of 4
Did the same thing, you need to get the EK "terminal" instead of link.

Should be more prominent on the WC vendor sites...
Edited by frunction - 4/14/14 at 10:34pm
post #3 of 4
Thread Starter 
Quote:
Originally Posted by frunction View Post

Did the same thing, you need to get the EK "terminal" instead of link.

Should be more prominent on the WC vendor sites...


Thanks man. +1 Rep
post #4 of 4
Thread Starter 
Well, I see this is not the case.

I have this block, http://www.ekwb.com/shop/ek-fc780-gtx-dcii-nickel.html

And this block, http://www.ekwb.com/shop/blocks/vga-blocks/fc-geforce/geforce-titan-series/ek-fc780-gtx-dcii-nickel-original-csq.html


It states "Please note that EK-FC Bridge & Link system is not compatible with this water block."
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › EK Waterblock bridge issue