Overclock.net › Forums › Cooling › Water Cooling › High performance radiator. What's the BEST out there?
New Posts  All Forums:Forum Nav:

High performance radiator. What's the BEST out there? - Page 13

post #121 of 127
with a perfect insulation, but you would need to try very hard to achieve it, the rad is the total opposite of insulation ,and what's the point of a loop without rad ?
Anyway if your pump as any influence on your water cooling when running , your loop is pretty bad , i can turn the pump up and down all i want i will never see any temp change even without fans running , and i have both a d5 and a mpcx running at the same time in my rig in 2 separate loops with temp monitoring.

the pump will never dump this much energy because of the joule effect in the electric parts.
the mechanical energy could be turned into heat but if all the power of the pump was going in heat the water would not move , so no way the pump dump 14-20 watts in heat directly.
A D5 on 12v use about 23 to 30 watts, a mpc about 18 watts and most of this power go into moving water,...
Edited by Ashuiegi - 4/19/14 at 12:38pm
HAF X - main rig
(24 items)
 
HAF XB
(14 items)
 
 
CPUMotherboardGraphicsRAM
E8500 ASUS P5E3 ASUS dcuii TOP GTX 670 OCZ reaper x hpc  
Hard DriveOptical DriveCoolingOS
samsung 500 gb samsung dvd antec H2O 920 windows vista 64b 
MonitorKeyboardPowerCase
LG 23 passive 3d logitech g15 CORSAIR GS800 haf xb 
MouseAudio
logitech g500 logitech Z 2300 
  hide details  
Reply
HAF X - main rig
(24 items)
 
HAF XB
(14 items)
 
 
CPUMotherboardGraphicsRAM
E8500 ASUS P5E3 ASUS dcuii TOP GTX 670 OCZ reaper x hpc  
Hard DriveOptical DriveCoolingOS
samsung 500 gb samsung dvd antec H2O 920 windows vista 64b 
MonitorKeyboardPowerCase
LG 23 passive 3d logitech g15 CORSAIR GS800 haf xb 
MouseAudio
logitech g500 logitech Z 2300 
  hide details  
Reply
post #122 of 127
I just want to say that my little test was not really something meant to publish on here. Not precise one bit. I didn't even take notes and my readings were all done by memory. Hence they actually might change every time I tell them.

I was just having some fun for my own learning experience.

And besides, as was observed by others, I don't have hardware running....yet.
So I'm merely screwing around with little I have right now.
Dark Vader
(6 items)
 
  
CoolingCoolingCoolingCooling
39 X AP-45 2150 rpm Gentle Typhoon fans Lamptron CW611 FrozenQ Dual Bay Reservoir 2x XT45 480. 1x UT60 480 ~ 1x UT60 360 ~ 1x UT... 
OSCase
Linux Ubuntu CaseLabs STH10 
  hide details  
Reply
Dark Vader
(6 items)
 
  
CoolingCoolingCoolingCooling
39 X AP-45 2150 rpm Gentle Typhoon fans Lamptron CW611 FrozenQ Dual Bay Reservoir 2x XT45 480. 1x UT60 480 ~ 1x UT60 360 ~ 1x UT... 
OSCase
Linux Ubuntu CaseLabs STH10 
  hide details  
Reply
post #123 of 127
Quote:
Originally Posted by Ashuiegi View Post

,and what's the point of a loop without rad ?

It's just a whole lot cheaper that way. No rads, no fans, no CPU, not GPU saves a ton of money man! biggrin.gif
And it reduces the drain on the electrical bill too!
Dark Vader
(6 items)
 
  
CoolingCoolingCoolingCooling
39 X AP-45 2150 rpm Gentle Typhoon fans Lamptron CW611 FrozenQ Dual Bay Reservoir 2x XT45 480. 1x UT60 480 ~ 1x UT60 360 ~ 1x UT... 
OSCase
Linux Ubuntu CaseLabs STH10 
  hide details  
Reply
Dark Vader
(6 items)
 
  
CoolingCoolingCoolingCooling
39 X AP-45 2150 rpm Gentle Typhoon fans Lamptron CW611 FrozenQ Dual Bay Reservoir 2x XT45 480. 1x UT60 480 ~ 1x UT60 360 ~ 1x UT... 
OSCase
Linux Ubuntu CaseLabs STH10 
  hide details  
Reply
post #124 of 127
I don't get what's being argued / discussed. Can someone just jump in and tell me if I'm doing things wrong. I have my pump maxed out, the noise is less than the 3 fans I have.. ie: noise is not an issue. Therefore, should I reduce the speed?

Setup in sig.
Just a 'puter
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS Maximus VIII Hero iGPU thanks to Nvidia 970 3.5GB Corsair Vengeance LPX CMK8GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Samsung 950 PRO 512GB Crucial M4 256GB RX360 V3 Koolance CPU-380I 
CoolingCoolingOSMonitor
Koolance RP-452X2 Reservoir Koolance PMP-450 12V Variable Speed Pump Windows 10 Pro x64 benq XL2411Z 
KeyboardPowerCaseMouse
logitech G510 Seasonic X-760 Corsair 800D Mionix Castor 
AudioAudio
Creative Sound Blaster X-Fi Titanium HD DT 990 Premium 250Ohm 
  hide details  
Reply
Just a 'puter
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS Maximus VIII Hero iGPU thanks to Nvidia 970 3.5GB Corsair Vengeance LPX CMK8GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Samsung 950 PRO 512GB Crucial M4 256GB RX360 V3 Koolance CPU-380I 
CoolingCoolingOSMonitor
Koolance RP-452X2 Reservoir Koolance PMP-450 12V Variable Speed Pump Windows 10 Pro x64 benq XL2411Z 
KeyboardPowerCaseMouse
logitech G510 Seasonic X-760 Corsair 800D Mionix Castor 
AudioAudio
Creative Sound Blaster X-Fi Titanium HD DT 990 Premium 250Ohm 
  hide details  
Reply
post #125 of 127
Nah!
Your speed at max is just fine.
Just nerds debating minutia.
Both sides of the 'arguement' will agree that your pump speed will not afffect temps.
If it gets a little noisy, you can turn it down a bit with no adverse effects.
Dark Vader
(6 items)
 
  
CoolingCoolingCoolingCooling
39 X AP-45 2150 rpm Gentle Typhoon fans Lamptron CW611 FrozenQ Dual Bay Reservoir 2x XT45 480. 1x UT60 480 ~ 1x UT60 360 ~ 1x UT... 
OSCase
Linux Ubuntu CaseLabs STH10 
  hide details  
Reply
Dark Vader
(6 items)
 
  
CoolingCoolingCoolingCooling
39 X AP-45 2150 rpm Gentle Typhoon fans Lamptron CW611 FrozenQ Dual Bay Reservoir 2x XT45 480. 1x UT60 480 ~ 1x UT60 360 ~ 1x UT... 
OSCase
Linux Ubuntu CaseLabs STH10 
  hide details  
Reply
post #126 of 127
Quote:
Originally Posted by PepeLapiu View Post

Nah!
Your speed at max is just fine.
Just nerds debating minutia.
Both sides of the 'arguement' will agree that your pump speed will not afffect temps.
If it gets a little noisy, you can turn it down a bit with no adverse effects.

And this.
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #127 of 127
Pump speeds effect flow rate. Flow rate effects coolant temp.

I like to set the lowest possible pump speed that gives me the desired flow rate. You well get a lot of different opinions on what is the desired flow rate, some loops cool very well with 2-3 Lpm, others like to see 5-7 Lpm. I run my loop at 3.0-3.4Lpm most all the time, if I'm doing a 100% load I turn it up to 4.5 Lpm.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › High performance radiator. What's the BEST out there?