Overclock.net › Forums › Intel › Intel - General › I Need Help Overclocking My Asus Z87 ROG Maximus VI Hero and i7 4770k
New Posts  All Forums:Forum Nav:

I Need Help Overclocking My Asus Z87 ROG Maximus VI Hero and i7 4770k - Page 47

post #461 of 641
Thread Starter 
Quote:
Originally Posted by 66racer View Post

Maybe, depends on if you also ran small fft or blend....you can run it 1hr and see if temps are higher than at 30mins.
I ran small FFTs for 35 minutes . do you think if I was to use coollaboratory liquid pro my max prime95 temp would go down from 78c to 75c ? I am now using tuniq tx-4
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
post #462 of 641
Quote:
Originally Posted by orndorf77 View Post

I just
I ran realbench last night for 1 hour and today I ran realbench for 2 hours and my cpu passed. my max temperature was 77c . I also ran prime95 for a half hour and my max temperature was 78c . how long dose it take for your prime95 temperature to reach the highest it going to get ? is a half hour run long enough for my cpu to reach the hottest its going to get ?

What version of prime 95 are you running. That matters too. Below 28.x doesn't exercise the new AVX2 and FMA3 floating point instructions. These will run lots hotter too.

Used to be people were aiming for absolute stability. This is hard to come by (high volts and temps) OCing Haswell and many are compromising. But if you compromise, eventually you may pay - it doesn't necessarily have to crash, you might just get some corruption.
post #463 of 641
Quote:
Originally Posted by orndorf77 View Post

I ran small FFTs for 35 minutes . do you think if I was to use coollaboratory liquid pro my max prime95 temp would go down from 78c to 75c ? I am now using tuniq tx-4

Its not worth it for such a small drop, feel free to try it. You may want to consider a beefier cooling solution if you REALLY want lower temps that bad. The h100i is a good cooler but going to a more custom style will help a few c as well and allow you to water cool your gpu's. Its obviously not cheap though but at least you have a powerful enough setup to justify it. SLI creates a lot of heat let alone doing it with 2 780's.

Honestly, try running with your side panel off if your already not doing so and see how temps go.
2014 nerd box evo
(18 items)
 
   
CPUMotherboardGraphicsRAM
AMD 1100T x6 4244mhz 3065cpu-nb (fx8150 at 4.9g... Asus Crosshair V Formula Asus gtx570 dcII- 890/1780/2200@1088mv corsair dominator gt 8GB 1866 @1886 
Hard DriveOptical DriveCoolingOS
corsair f120ssd/seagate 1TB Asus cd/dvd burner Antec Kuhler 920 semi-custom loop (2 radiators) win7 professional 64bit 
MonitorPowerCaseMouse
Gateway 23" 1920x1080 corsair ax850 Rosewill blackhawk w/hdd bay mod logitech mx518 
  hide details  
Reply
2014 nerd box evo
(18 items)
 
   
CPUMotherboardGraphicsRAM
AMD 1100T x6 4244mhz 3065cpu-nb (fx8150 at 4.9g... Asus Crosshair V Formula Asus gtx570 dcII- 890/1780/2200@1088mv corsair dominator gt 8GB 1866 @1886 
Hard DriveOptical DriveCoolingOS
corsair f120ssd/seagate 1TB Asus cd/dvd burner Antec Kuhler 920 semi-custom loop (2 radiators) win7 professional 64bit 
MonitorPowerCaseMouse
Gateway 23" 1920x1080 corsair ax850 Rosewill blackhawk w/hdd bay mod logitech mx518 
  hide details  
Reply
post #464 of 641
Thread Starter 
Quote:
Originally Posted by GeneO View Post

What version of prime 95 are you running. That matters too. Below 28.x doesn't exercise the new AVX2 and FMA3 floating point instructions. These will run lots hotter too.

Used to be people were aiming for absolute stability. This is hard to come by (high volts and temps) OCing Haswell and many are compromising. But if you compromise, eventually you may pay - it doesn't necessarily have to crash, you might just get some corruption.
I downloaded it from softonic downloader . how do I check what version I have ?
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
post #465 of 641
Thread Starter 
Quote:
Originally Posted by 66racer View Post

Its not worth it for such a small drop, feel free to try it. You may want to consider a beefier cooling solution if you REALLY want lower temps that bad. The h100i is a good cooler but going to a more custom style will help a few c as well and allow you to water cool your gpu's. Its obviously not cheap though but at least you have a powerful enough setup to justify it. SLI creates a lot of heat let alone doing it with 2 780's.

Honestly, try running with your side panel off if your already not doing so and see how temps go.
I was thinking about getting a custom water loop kit but my case will not support the thickness I can barley fit my corsair h100i in it because the fans on my radiator is like 1mm from touching my ram . the heat sink on my ram is big . do you know of any custom water loop kits that come with a radiator the same thickness of the corsair h100i ?
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
post #466 of 641
Oh yeah airflow doesnt seem ideal in the case you have for all the items you have in it. Have you checked temps with the side panel off? There are thin aftermarket radiators though. You can even try something like the swiftech apogee drive ii which has the pump and block in one housing to make life a little easier. You would need a different case to put everything under water though. Wouldnt be cheap, but dont stress about temps, your good.

See how your temps are with the side panel off though if your not already running it that way.
2014 nerd box evo
(18 items)
 
   
CPUMotherboardGraphicsRAM
AMD 1100T x6 4244mhz 3065cpu-nb (fx8150 at 4.9g... Asus Crosshair V Formula Asus gtx570 dcII- 890/1780/2200@1088mv corsair dominator gt 8GB 1866 @1886 
Hard DriveOptical DriveCoolingOS
corsair f120ssd/seagate 1TB Asus cd/dvd burner Antec Kuhler 920 semi-custom loop (2 radiators) win7 professional 64bit 
MonitorPowerCaseMouse
Gateway 23" 1920x1080 corsair ax850 Rosewill blackhawk w/hdd bay mod logitech mx518 
  hide details  
Reply
2014 nerd box evo
(18 items)
 
   
CPUMotherboardGraphicsRAM
AMD 1100T x6 4244mhz 3065cpu-nb (fx8150 at 4.9g... Asus Crosshair V Formula Asus gtx570 dcII- 890/1780/2200@1088mv corsair dominator gt 8GB 1866 @1886 
Hard DriveOptical DriveCoolingOS
corsair f120ssd/seagate 1TB Asus cd/dvd burner Antec Kuhler 920 semi-custom loop (2 radiators) win7 professional 64bit 
MonitorPowerCaseMouse
Gateway 23" 1920x1080 corsair ax850 Rosewill blackhawk w/hdd bay mod logitech mx518 
  hide details  
Reply
post #467 of 641
Thread Starter 
Quote:
Originally Posted by 66racer View Post

Oh yeah airflow doesnt seem ideal in the case you have for all the items you have in it. Have you checked temps with the side panel off? There are thin aftermarket radiators though. You can even try something like the swiftech apogee drive ii which has the pump and block in one housing to make life a little easier. You would need a different case to put everything under water though. Wouldnt be cheap, but dont stress about temps, your good.

See how your temps are with the side panel off though if your not already running it that way.
you are rite I am lucky my max temperature is under 80c. I wish I could fix this problem though the way I have my corsair h100i installed is the x2 120mm default fans are connected to the radiator on the inside of my case and I have x2 200mm fans above the frame of my case and under the top panel and all the fans are exhausting air out of my case. I cant switch the fans around to make them intake because one of the screws on one of my 200mm top fans is striped and I cant flip the fan so my cooler is stuck as exhaust. do you know a easy way to get striped screws out ?
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
post #468 of 641
Quote:
Originally Posted by orndorf77 View Post

you are rite I am lucky my max temperature is under 80c. I wish I could fix this problem though the way I have my corsair h100i installed is the x2 120mm default fans are connected to the radiator on the inside of my case and I have x2 200mm fans above the frame of my case and under the top panel and all the fans are exhausting air out of my case. I cant switch the fans around to make them intake because one of the screws on one of my 200mm top fans is striped and I cant flip the fan so my cooler is stuck as exhaust. do you know a easy way to get striped screws out ?

Please try to post a picture of the screw your talking about. If you put the radiator as intake it will help try to squeeze out another 1-2c. Did you try running with the side panel off?
2014 nerd box evo
(18 items)
 
   
CPUMotherboardGraphicsRAM
AMD 1100T x6 4244mhz 3065cpu-nb (fx8150 at 4.9g... Asus Crosshair V Formula Asus gtx570 dcII- 890/1780/2200@1088mv corsair dominator gt 8GB 1866 @1886 
Hard DriveOptical DriveCoolingOS
corsair f120ssd/seagate 1TB Asus cd/dvd burner Antec Kuhler 920 semi-custom loop (2 radiators) win7 professional 64bit 
MonitorPowerCaseMouse
Gateway 23" 1920x1080 corsair ax850 Rosewill blackhawk w/hdd bay mod logitech mx518 
  hide details  
Reply
2014 nerd box evo
(18 items)
 
   
CPUMotherboardGraphicsRAM
AMD 1100T x6 4244mhz 3065cpu-nb (fx8150 at 4.9g... Asus Crosshair V Formula Asus gtx570 dcII- 890/1780/2200@1088mv corsair dominator gt 8GB 1866 @1886 
Hard DriveOptical DriveCoolingOS
corsair f120ssd/seagate 1TB Asus cd/dvd burner Antec Kuhler 920 semi-custom loop (2 radiators) win7 professional 64bit 
MonitorPowerCaseMouse
Gateway 23" 1920x1080 corsair ax850 Rosewill blackhawk w/hdd bay mod logitech mx518 
  hide details  
Reply
post #469 of 641
Quote:
Originally Posted by orndorf77 View Post


I ran small FFTs for 35 minutes . do you think if I was to use coollaboratory liquid pro my max prime95 temp would go down from 78c to 75c ? I am now using tuniq tx-4

 

The Blend test should get the temps higher than the Small FFTs because the Blend test will stress the Integrated Memory Controller too (IMC). The Small FFTs test will not.

 

Quote:
Originally Posted by orndorf77 View Post


I downloaded it from softonic downloader . how do I check what version I have ?

 

Use the Help menu. Open Help and choose "About Prime95...". This is how you check the version in pretty much any program. Look for just the version number. So, if you see 25.11, then say "25.11", or "27.9". Don't say everything else that you see because it's mostly irrelevant. Or, say "28.5" if you see "28.5" in there. 28.5 is the version that you need.

It's a computer!
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveOptical DriveOptical Drive
250 GB Samsung 840 EVO (OS) 3 TB Toshiba P300 (storage) Samsung SH-S243N 24x DVD Burner Samsung SH-S203N 20X DVD Burner 
CoolingOSMonitorKeyboard
Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) Filco Majestouch 104-key Cherry MX Blues w/NKRO 
PowerCaseMouseMouse Pad
Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate Basic, but premium round 
AudioAudio
X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveOptical DriveOptical Drive
250 GB Samsung 840 EVO (OS) 3 TB Toshiba P300 (storage) Samsung SH-S243N 24x DVD Burner Samsung SH-S203N 20X DVD Burner 
CoolingOSMonitorKeyboard
Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) Filco Majestouch 104-key Cherry MX Blues w/NKRO 
PowerCaseMouseMouse Pad
Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate Basic, but premium round 
AudioAudio
X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #470 of 641
Thread Starter 
Quote:
Originally Posted by TwoCables View Post

The Blend test should get the temps higher than the Small FFTs because the Blend test will stress the Integrated Memory Controller too (IMC). The Small FFTs test will not.


Use the Help menu. Open Help and choose "About Prime95...". This is how you check the version in pretty much any program. Look for just the version number. So, if you see 25.11, then say "25.11", or "27.9". Don't say everything else that you see because it's mostly irrelevant. Or, say "28.5" if you see "28.5" in there. 28.5 is the version that you need.
I am using version v26.5 . is this the latest version of prime95 ?
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 4790k delid 4.8ghz msi z97 gaming 7 evga gtx 780 sc acx sli evga gtx 780 sc acx sli 
RAMHard DriveOptical DriveCooling
kingston hyperx beast ddr3 2400 2x8 16gb ocz vector 512gb asus dvd rw x2 ek-fc780 gtx ti water blocks with back plates 
CoolingCoolingCoolingCooling
ek supremacy evo alphacool st30 240mm alphacool st30 360mm xspc d5 vario 
CoolingOSMonitorKeyboard
xspc d5 acrylic tank reservoir windows 8.1 full version qnix evolution 2 2560x1440 96hz gigabyte osmium cherry red 
PowerCaseMouseMouse Pad
cooler master v1000 corsair air 540 zowie ec1 A artisan hien soft 
AudioAudioAudio
asus xonar dx logitech z506 razer tiamat 7.1 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › I Need Help Overclocking My Asus Z87 ROG Maximus VI Hero and i7 4770k