Enter extreme tweaker, verify all target speeds are stock/
Remember to hit enter when changing values.
Set AI OC tuner to manual
Set PLL selection to LC PLL
Set CPU core ratio to sync all cores (43)
Set max CPU cache ratio to 41
Internal PLL OV (enabled)
Set fully manual mode to enable
Set core voltage to 1.22 (hit enter) You might require more or less.
SVID control (disabled)
This finishes extreme tweaker.
Set CPU load line to level 5
Set CPU power phase control to optimized
Set CPU current capability to 120%
This finishes digi+power
Enter tweakers paradise:
If not using the iGPU (disable)
This finishes tweakers paradise.
Enter CPU power management:
CPU integrated VR fault management (disable)
CPU integrated VR efficiency management (high performance)
This finishes CPU power management.
F10 and cross fingers.
Eventually you can change to offset voltage if you want, this way the voltage will be dynamic for the different power states.
My default load voltage is 1.184v under load, 43x requires 1.232v under load to be stable.
I use a + offset of .045, that plus LLC at level 5 gives me my stable + offset.
BTW Other than core voltage the above settings are good to 47x for my CPU, more detailed tweaking is required for >47x.
I always keep cache at -2 from the core.
Edited by grunion - 4/19/14 at 6:09pm