Overclock.net › Forums › Intel › Intel - General › [Official] - X58 Xeon Club -
New Posts  All Forums:Forum Nav:

[Official] - X58 Xeon Club - - Page 1036

Poll Results: How many years have you owned your X58 - Tylersburg platofrm?

 
  • 9% (46)
    More than 1 year
  • 4% (23)
    More than 2 years
  • 8% (40)
    More than 3 years
  • 11% (52)
    More than 4 years
  • 24% (113)
    More than 5 years
  • 41% (196)
    More than 6 years
470 Total Votes  
post #10351 of 12741
Quote:
Originally Posted by DragonQ View Post

Thanks, that worked. It now sits at 22x properly. I can get it stable at 191x22 but not 200x22 (WHEA_UNCORRECTABLE_ERROR) so far. Here are my settings and voltages if anyone has any suggestions:



I've heard conflicting information regarding the CPU PLL Voltage, should it be 1.82 V, 1.88 V, or does it not matter as long as it's between 1.8-1.9 V?

Set QPI LINK to auto
CPU PLL to auto
QPI/DRAM to 1.275
post #10352 of 12741
Quote:
Originally Posted by nicke85 View Post

Set QPI LINK to auto
CPU PLL to auto
QPI/DRAM to 1.275
May I ask why? QPI is already at its lowest possible setting and lowering the voltage doesn't sound like it'd help? I can try setting CPU PLL to auto though.

I've also just realised that although 191x22 doesn't crash with the above settings, it doesn't pass IBT stability test either. Setting CPU PLL to auto doesn't help. frown.gif
Edited by DragonQ - 1/11/17 at 10:02am
post #10353 of 12741
Quote:
Originally Posted by DragonQ View Post

Thanks, that worked. It now sits at 22x properly. I can get it stable at 191x22 but not 200x22 (WHEA_UNCORRECTABLE_ERROR) so far. Here are my settings and voltages if anyone has any suggestions:



I've heard conflicting information regarding the CPU PLL Voltage, should it be 1.82 V, 1.88 V, or does it not matter as long as it's between 1.8-1.9 V?

WHEA_UNCORRECTABLE_ERROR is normally to do with QPI/VTT Vcore.

BSOD Codes for i7 x58 chipset (taken from http://www.overclock.net/t/935829/the-overclockers-bsod-code-list)
0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is <- WHEA_UNCORRECTABLE_ERROR
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

Some people have found that PLL voltages have improved overclocking and thermal, and have recommended running at even 1.3.

Your QPI/VTT seems pretty high for that amount of Uncore? maybe its just me smile.gif
post #10354 of 12741
Quote:
Originally Posted by voxson5 View Post

WHEA_UNCORRECTABLE_ERROR is normally to do with QPI/VTT Vcore.

BSOD Codes for i7 x58 chipset (taken from http://www.overclock.net/t/935829/the-overclockers-bsod-code-list)
0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is <- WHEA_UNCORRECTABLE_ERROR
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

Some people have found that PLL voltages have improved overclocking and thermal, and have recommended running at even 1.3.

Your QPI/VTT seems pretty high for that amount of Uncore? maybe its just me smile.gif
Yeah that's why I was confused - changing the QPI voltage between 1.275 and 1.35 V made no difference. I just tried the following settings and finally got a stable IBT run (Very High, 8 cores, 10 runs):

CPU Core = 1.35 V
QPI = 1.275 V
CPU PLL = 1.82 V
DRAM = 1.60 V

I actually think the difference may have been the DRAM voltage. I'm running 2 sticks rated for 1600 MHz @ 1.5 V and another 2 rated for 1600 MHz @ 1.65 V, but it was set to Auto since I crossflashed the BIOS. I'm gonna try 200x22 with these settings to see what happens.
post #10355 of 12741
Want a more fun tune?

Set Blck to 200
Ram 1600
Uncore 3200
Multi 20(disable turbo)

Vcore 1.35-1.375
QPI/Dram core 1.30
PLL Auto
Set ram command rate 1T
QPI Slowest link speed

will give you full time 4Ghz(which IMO is more useful than turbo 4.2Ghz) and also some nice performance on that Uncore. All in all it's the single best tune i've started on the X5650, tweak from there smile.gif

once you are stable there, then try and achieve turbo (4.4Ghz biggrin.gif )
post #10356 of 12741
Quote:
Originally Posted by GENXLR View Post

Want a more fun tune?

Set Blck to 200
Ram 1600
Uncore 3200
Multi 20(disable turbo)

Vcore 1.35-1.375
QPI/Dram core 1.30
PLL Auto
Set ram command rate 1T
QPI Slowest link speed

will give you full time 4Ghz(which IMO is more useful than turbo 4.2Ghz) and also some nice performance on that Uncore. All in all it's the single best tune i've started on the X5650, tweak from there smile.gif

once you are stable there, then try and achieve turbo (4.4Ghz biggrin.gif )
My X5650 has been running at 200x20 for two years stable. My goal was to crossflash my BIOS to eliminate the P6T Deluxe V2's turbo throttling and see if I could use the 22x multiplier to achieve a higher clock speed, mostly for fun.

I took the settings that seemed stable for 191x22 (above) and increase BCLK to 200 MHz. Froze as soon as I opened Firefox. Increased QPI from 1.275 to 1.3 V, same thing. Dropped QPI to 195 MHz, froze as soon as I started playing a video. Not sure if freezes are indicative of anything in particular.

Changing QPI voltage never seems to do anything and I'm already at the maximum VCore I'm willing to use, so it's likely I just can't get beyond 4.2 GHz with this chip. Shame because 4.4 GHz would be golden as it'd allow my RAM to run at optimum speed too.
Edited by DragonQ - 1/11/17 at 11:19am
post #10357 of 12741
DERP

well my P6T today is finally being retired because.... I finally got my Rampage III Extreme to work again, was a bad VRM from my 990X ES incident(anyone who remembers what i tried is probably dying laughing right now)
post #10358 of 12741
@ DragonQ - Try manual low PLL values like 1.5 or 1.3V
post #10359 of 12741
[
Quote:
Originally Posted by gofasterstripes View Post

@ DragonQ - Try manual low PLL values like 1.5 or 1.3V

It's still too getting hot with 240mm rad...This one here is UFO undervolter though...that 3520 went in yeah at 220 Blck/mult..but was ALL the voltage Eater... Capture.JPG 333k .JPG file
post #10360 of 12741
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › [Official] - X58 Xeon Club -