Overclock.net › Forums › Intel › Intel - General › [Official] - X58 Xeon Club -
New Posts  All Forums:Forum Nav:

[Official] - X58 Xeon Club - - Page 863

Poll Results: How many years have you owned your X58 - Tylersburg platofrm?

 
  • 10% (52)
    More than 1 year
  • 4% (24)
    More than 2 years
  • 8% (41)
    More than 3 years
  • 10% (54)
    More than 4 years
  • 22% (113)
    More than 5 years
  • 42% (213)
    More than 6 years
497 Total Votes  
post #8621 of 13360
OK Kana I dropped the voltage of my IOH PCIe as you suggested, but I can't get 1.26v to stick. If I type in 1.26 It just auto sets itself to 1.51v. Below is the image showing it setting itself to 1.51v. But I don't think this will help since I was already at these min voltages for the longest time now. I did drop my IOH voltage though back down to where I was before.

The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
post #8622 of 13360
Thread Starter 
Sorry I gave you the wrong info. Busy day today for me. I got the ICH\IOH voltage confused with the ICH\IOH "PCIe" Voltage. So yes 1.50v-1.51v will be the minimum for your ICH\IOH PCIe Voltage.

For the IOH and ICH PCie Voltage you can try increasing the voltages to see if that will help:

IOH PCIe Voltage = try values between 1.50v\1.51v - 1.7v
ICH PCIe Voltage = try values between 1.50v - 1.75v

You go a bit higher if you need to, but if you aren't seeing any positive results then going higher probably won't solve your issue.
    
CPUMotherboardGraphicsRAM
Xeon 5660 @ 4.8Ghz [Highest OC 5.4Ghz] ASUS Sabertooth X58 AMD Fury X 24GB - 1600Mhz Triple Channel 
Hard DriveHard DriveHard DriveHard Drive
Seagate Barracuda 7200 1TB RAID 0 - B Seagate Barracuda 7200 1TB RAID 0 - B Seagate Barracuda 7200 1TB RAID 0 - C Seagate Barracuda 7200 1TB RAID 0 - C 
Hard DriveHard DriveHard DriveCooling
SSD 128GB RAID - A SSD 128GB RAID - A SSD 256GB  Antec Kuhler H2O 620 [Pull] 
OSMonitorPowerOther
Windows 10 Professional  Dual 24-inch Monitors EVGA SuperNOVA G2 1300W x2 Delta FFB1212EH-F00 Fan 4,000rpm  
Other
x4 Scythe Gentle Typhoon D1225C12BBAP-31 Fan 54... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Xeon 5660 @ 4.8Ghz [Highest OC 5.4Ghz] ASUS Sabertooth X58 AMD Fury X 24GB - 1600Mhz Triple Channel 
Hard DriveHard DriveHard DriveHard Drive
Seagate Barracuda 7200 1TB RAID 0 - B Seagate Barracuda 7200 1TB RAID 0 - B Seagate Barracuda 7200 1TB RAID 0 - C Seagate Barracuda 7200 1TB RAID 0 - C 
Hard DriveHard DriveHard DriveCooling
SSD 128GB RAID - A SSD 128GB RAID - A SSD 256GB  Antec Kuhler H2O 620 [Pull] 
OSMonitorPowerOther
Windows 10 Professional  Dual 24-inch Monitors EVGA SuperNOVA G2 1300W x2 Delta FFB1212EH-F00 Fan 4,000rpm  
Other
x4 Scythe Gentle Typhoon D1225C12BBAP-31 Fan 54... 
  hide details  
Reply
post #8623 of 13360
On the R3E I never really needed to increase IOH/ICH voltages much, even when pushing 220+ on bclk.

Try lower values on CPU PLL as well. I used to run 1.45-1.48V safely on a 980X @ 4.4ghz @ 1.435Vcore. ( I have watercooling, so temps were always under 70C )
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
post #8624 of 13360
Yeah but my only troubles seem to be data movement. Things like Browsers and apps and even Windows itself run great. But When I go to transfer 100GB of data say from the Marvell to say a SSD on the ICH it is extremely slow sometimes dropping to 0 MB/s at many times causing data transfers to really piss me off. Also things like Restarting or sleeping don't seem to work properly. I can go into Sleep mode, and come out of it but the system gets unstable after coming out of sleep. Restarting Windows can sit there on the blue screen with rotating dots for 15 to 20 minutes before I get angry and hit the power button.

However, if I boot into Ubuntu and hit the sleep button and come out of sleep it is perfectly stable, and it goes into sleep a hundred times faster. Restarting when I am in Ubuntu takes literally .25 of a second and I can't even feel any time pass by before the BIOS is already booting up. Data transfers while using Ubuntu max out my Marvel and ICH sata ports and the data transfers within Ubuntu keep my SSD's at maximum. So, I don't understand what's happening here on my system. Windows just seems to hate my computer and Ubuntu loves it.

My symptoms seems to suggest something wrong with voltages with the IOH/ICH boundary. Even though I have raised the voltage, the CPU has never failed and it can run Prime95 indefinitely at the current voltages, even if I drop it from 1.32 down to 1.29 it will run indefinitely.

I think my ICH or PCIe system is weak for some reason, but I don't understand why an alternative OS is not affected. I wish I could afford x99 or even a new Skylake setup. I'm getting very tired of fighting with my hardware and Windows.
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
post #8625 of 13360
Does this look safe to you guys? I took both IOH/ICH PCIe to 1.61v and dropped IOH/ICH core voltages to 1.25v which I got from a i7-980X guide on my exact board.

The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
post #8626 of 13360
Quote:
Originally Posted by }SkOrPn--' View Post

Yeah but my only troubles seem to be data movement. Things like Browsers and apps and even Windows itself run great. But When I go to transfer 100GB of data say from the Marvell to say a SSD on the ICH it is extremely slow sometimes dropping to 0 MB/s at many times causing data transfers to really piss me off. Also things like Restarting or sleeping don't seem to work properly. I can go into Sleep mode, and come out of it but the system gets unstable after coming out of sleep. Restarting Windows can sit there on the blue screen with rotating dots for 15 to 20 minutes before I get angry and hit the power button.

However, if I boot into Ubuntu and hit the sleep button and come out of sleep it is perfectly stable, and it goes into sleep a hundred times faster. Restarting when I am in Ubuntu takes literally .25 of a second and I can't even feel any time pass by before the BIOS is already booting up. Data transfers while using Ubuntu max out my Marvel and ICH sata ports and the data transfers within Ubuntu keep my SSD's at maximum. So, I don't understand what's happening here on my system. Windows just seems to hate my computer and Ubuntu loves it.

My symptoms seems to suggest something wrong with voltages with the IOH/ICH boundary. Even though I have raised the voltage, the CPU has never failed and it can run Prime95 indefinitely at the current voltages, even if I drop it from 1.32 down to 1.29 it will run indefinitely.

I think my ICH or PCIe system is weak for some reason, but I don't understand why an alternative OS is not affected. I wish I could afford x99 or even a new Skylake setup. I'm getting very tired of fighting with my hardware and Windows.

That really almost sounds like a driver issue. The Marvell chip on the R3E is literally garbage. You will get better 4K reads on the Intel ports which is really what matters for an OS drive on SSD.
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
post #8627 of 13360
Quote:
Originally Posted by cookiesowns View Post

That really almost sounds like a driver issue. The Marvell chip on the R3E is literally garbage. You will get better 4K reads on the Intel ports which is really what matters for an OS drive on SSD.

Yeah but I don't use the Marvel for the OS, it is only used as a simple eSATA backup drive and for the Optical drive. I only use the Intel ports for the OS's and all my other storage SSDs. Ubuntu maxes out the Marvel ports to acceptable speeds. I have tried every known driver for the Marvel, and it doesn't change anything. Again Ubuntu works perfectly with it maxing out the SSD speeds.
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
post #8628 of 13360
Looking to jump from my i7 920 (OC'ed to 3.8 on air) to a Xeon X5675. Plan on overclocking using the same cooler (hyper 212+), nothing insane.

Recently installed a GTX 1070 SC and my i7 920 is really holding me back and it was recommended I switch out for one of the Xeon cpu's as it should breath a lot of life back into my old system.

Trying to become more familiar with the xeon chips and overclocking them in general, it's been a while.
I will need to check what BIOS version my X58 Sabertooth has when I get home.

I'm looking at B batches only as well (I must have read a good 100 something pages of this thread, really good stuff).

What price and quality should I be looking for? I'm seeing around $130 used.
One of the listings: http://www.ebay.com/itm/Intel-Xeon-X5675-6-Core-3-06GHz-WESTMERE-Server-CPU-6-40GT-s-12MB-SLBY-/371552970144?hash=item56824865a0:g:cvsAAOSwG-1Wwygz
M4573RCH13F
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5675 ASUS Sabertooth X58 EVGA GeForce GTX 1070 Super Clocked 3x4 GB Corsair Vengeance DDR3 RAM 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 EVO - 500GB 1TB SATA II 3.0 GB 7200RPM HD Black Samsung 22X DVDRW Coolermaster Hyper 212 Plus 
OSMonitorMonitorKeyboard
Windows 10 x64 Home Premium HP Pavilion 25xw - 25" 1080p Dell P2412H 24"  HYTOBI K50 
PowerCaseMouseMouse Pad
SeaSonic SSR-650RM - 650W Blue NZXT Zero 2 Full Tower Case Logitech G500s Razer eXactMat 2-Sided Mouse Pad  
  hide details  
Reply
M4573RCH13F
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5675 ASUS Sabertooth X58 EVGA GeForce GTX 1070 Super Clocked 3x4 GB Corsair Vengeance DDR3 RAM 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 EVO - 500GB 1TB SATA II 3.0 GB 7200RPM HD Black Samsung 22X DVDRW Coolermaster Hyper 212 Plus 
OSMonitorMonitorKeyboard
Windows 10 x64 Home Premium HP Pavilion 25xw - 25" 1080p Dell P2412H 24"  HYTOBI K50 
PowerCaseMouseMouse Pad
SeaSonic SSR-650RM - 650W Blue NZXT Zero 2 Full Tower Case Logitech G500s Razer eXactMat 2-Sided Mouse Pad  
  hide details  
Reply
post #8629 of 13360
Hi guys,
Looking to upgrade my I7 920 to a xeon x5650.
Can anyone confirm my gigabyte EX58-EXTREME would support this cpu?
I cant find it in the cpu support list.

Thanks
StockRyzen
(5 items)
 
   
CPUMotherboardGraphicsRAM
ryzen r7 1700 Asus Crosshair 6 hero MSI geforce gtx 1080 armor 8g oc gskill trident z F4-3200C14D-16GTZR 
Hard Drive
samsung 840pro 256Gb 
CPUMotherboardGraphicsRAM
Xeon X5675@4.2Ghz ga-ex58-extreme GTX470 Corsair Vengeance Blue 16GB (4x4GB) DDR3 1866 MHz 
Hard DriveHard DriveOSMonitor
WD green SSD OCZ vertex3 Win 7 Ultimate LG W2486L 
PowerCaseMouse Pad
Antec TP-750 Corsair carbide Ai 540 Yes 
  hide details  
Reply
StockRyzen
(5 items)
 
   
CPUMotherboardGraphicsRAM
ryzen r7 1700 Asus Crosshair 6 hero MSI geforce gtx 1080 armor 8g oc gskill trident z F4-3200C14D-16GTZR 
Hard Drive
samsung 840pro 256Gb 
CPUMotherboardGraphicsRAM
Xeon X5675@4.2Ghz ga-ex58-extreme GTX470 Corsair Vengeance Blue 16GB (4x4GB) DDR3 1866 MHz 
Hard DriveHard DriveOSMonitor
WD green SSD OCZ vertex3 Win 7 Ultimate LG W2486L 
PowerCaseMouse Pad
Antec TP-750 Corsair carbide Ai 540 Yes 
  hide details  
Reply
post #8630 of 13360
Quote:
Originally Posted by prey1337 View Post

Looking to jump from my i7 920 (OC'ed to 3.8 on air) to a Xeon X5675. Plan on overclocking using the same cooler (hyper 212+), nothing insane.

Recently installed a GTX 1070 SC and my i7 920 is really holding me back and it was recommended I switch out for one of the Xeon cpu's as it should breath a lot of life back into my old system.

Trying to become more familiar with the xeon chips and overclocking them in general, it's been a while.
I will need to check what BIOS version my X58 Sabertooth has when I get home.

I'm looking at B batches only as well (I must have read a good 100 something pages of this thread, really good stuff).

What price and quality should I be looking for? I'm seeing around $130 used.

$130 is about the going rate + or - a few. I'm currently running my X5675 on my X58 Sabertooth and it overclocks like a dream. Since its summer I've got mine turned down to 4.4Ghz but it still slices through anything I throw at it. I'm GPU limited for now but even my old 7950 still handles 1080P very well.

Although the 212 will work I certainly wouldn't expect crazy overclocks with it. I would expect to see a max safe 4Ghz or maybe 4.2Ghz on the Hyper 212 and that's if your X5675 is a low leakage chip.
Edited by FlawleZ - 7/5/16 at 1:27pm
Sandy
(6 items)
 
XuperXeon
(17 items)
 
 
CPUMotherboardGraphicsHard Drive
i7 3970X Asus Rampage IV Extreme Sapphire R9 Fury Samsung 850 Pro 
OSPower
Windows 7 Pro x64 OCZ Gold 850W 
CPUMotherboardGraphicsRAM
Intel Xeon X5675 @ 4.6Ghz Asus Sabertooth X58 AMD Radeon R9 Fury Corsair XMS DDR3  
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 2 OCZ Vertex WD VelociRaptor LiteOn DVD/RW 
CoolingOSMonitorKeyboard
Corsair H100i GTX Windows 7 Ultimate x64 Hanns-G 27" LED Razer BlackWidow Ultimate 
PowerCaseMouseMouse Pad
OCZ 850W ZX Series Thermaltake Level 10 GT Razer DeathAdder 3500dpi Xtrac Ripper 
Audio
Creative Soundblaster X-Fi 
  hide details  
Reply
Sandy
(6 items)
 
XuperXeon
(17 items)
 
 
CPUMotherboardGraphicsHard Drive
i7 3970X Asus Rampage IV Extreme Sapphire R9 Fury Samsung 850 Pro 
OSPower
Windows 7 Pro x64 OCZ Gold 850W 
CPUMotherboardGraphicsRAM
Intel Xeon X5675 @ 4.6Ghz Asus Sabertooth X58 AMD Radeon R9 Fury Corsair XMS DDR3  
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 2 OCZ Vertex WD VelociRaptor LiteOn DVD/RW 
CoolingOSMonitorKeyboard
Corsair H100i GTX Windows 7 Ultimate x64 Hanns-G 27" LED Razer BlackWidow Ultimate 
PowerCaseMouseMouse Pad
OCZ 850W ZX Series Thermaltake Level 10 GT Razer DeathAdder 3500dpi Xtrac Ripper 
Audio
Creative Soundblaster X-Fi 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › [Official] - X58 Xeon Club -