Overclock.net › Forums › Intel › Intel - General › [Official] - X58 Xeon Club -
New Posts  All Forums:Forum Nav:

[Official] - X58 Xeon Club - - Page 892

Poll Results: How many years have you owned your X58 - Tylersburg platofrm?

 
  • 10% (50)
    More than 1 year
  • 4% (24)
    More than 2 years
  • 8% (41)
    More than 3 years
  • 10% (53)
    More than 4 years
  • 23% (113)
    More than 5 years
  • 42% (208)
    More than 6 years
489 Total Votes  
post #8911 of 13159
Yo!

I'd set SATA port to native and leave it there, also HPET to 64bit obvs. I disable all the Marvell/GSATA **** while I'm there.

I have no idea about the fan situation, it's always behaved as advertised on the 2 Gigabyte boards I've used it on. I would use the Beta BIOS, FD, it's working great for me. Did you say you'd tried it on the CPU_fan header? There's some BIOS options on there you could try as well.

You can flash the BIOS from a USB, it's an FKEY at boot - turn "show boot logo" on and "quick boot"off and you can see the FKey functions.

I have a memory you can also do it from within the BIOS, but I'm in windows so I can't check right now biggrin.gif
post #8912 of 13159








You can launch Qflash from the BIOS or instead of the BIOS at boot - F8/End key. The backup doesn't get updated AFAIK.
post #8913 of 13159
Hello guys,ı'm using ga x58a ud7 rev1.0 with i7 930 / 3.6ghz oc - bios f9a
today my xeon e5640 come and i replaced i7 930. but ı have a problem,here is the my video https://sendvid.com/jnoveeb6
ı googled and found same problem http://forums.tweaktown.com/gigabyte/60254-after-update-i7-950-x5670-mobo-x58a-ud3r-wont-boot-v-deo.html but no solution.
any help ?

edit: cpu from aliexpress. looks bad ? is this cpu deformed ? http://imgur.com/a/yjUFT
Edited by Cyberpunk2077 - 8/8/16 at 9:43am
post #8914 of 13159
Try a reseat of the cpu and please put on your CPU heatsink, something. Maybe its getting too hot too fast and shutting down on purpose. Also last week my secondary system, was doing the EXACT identical thing, and it turned out my video card had just up and died, which was very weird.

EDIT: And yes it looks like the pads have had some copper material removed by accidental force. If the actual internal trace inside the PCB was cut/damaged, then there is no way to fix that.
Edited by }SkOrPn--' - 8/8/16 at 11:23am
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
post #8915 of 13159
Thank you for the pics. I think my bios settings are almost exactly the same except I don't use HPET.

Ok. I'm going to register on the Gibabyte forums and ask about the cpu pwn feature on the bios. That might be a game changer frown.gif For one I can't take the noise, and two it will burn the pump out frown.gif

Also gonna register at the Swiftech forums and see if there is another way to manage the motor speed.

The bios issue is weird. I've set the boot options to almost every USB option, I've tried adding on a HDD (old raptor with no data on it except the FD bios info), changed the boot order around, everything I can think of to get anything recognized and when I get into the Flash options menu and try n flash the bios it says something about 'No HDD recognized' and it won't update the bios. It makes no sense.



     
CPUMotherboardGraphicsRAM
i7 970 between 4 - 4.4GHz Gigabyte UD7 Rev 2.0 EVGA GTX 1070 FE 2000MHz CL8.8.8.24 1T tRFC 88 
Hard DriveHard DriveCoolingOS
Samsung Evo 128Gb OCZ VertexLE 100Gb Megahalems  Windows 10 Pro 64 
MonitorKeyboardPowerCase
Asus VG248QE Corsair K70  EVGA Supernova T2 1000W Lian Li PC-A20 
MouseAudio
Sidewinder MX5 Creative Zx 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7 970 between 4 - 4.4GHz Gigabyte UD7 Rev 2.0 EVGA GTX 1070 FE 2000MHz CL8.8.8.24 1T tRFC 88 
Hard DriveHard DriveCoolingOS
Samsung Evo 128Gb OCZ VertexLE 100Gb Megahalems  Windows 10 Pro 64 
MonitorKeyboardPowerCase
Asus VG248QE Corsair K70  EVGA Supernova T2 1000W Lian Li PC-A20 
MouseAudio
Sidewinder MX5 Creative Zx 
  hide details  
Reply
post #8916 of 13159
Quote:
Originally Posted by }SkOrPn--' View Post

Try a reseat of the cpu and please put on your CPU heatsink, something. Maybe its getting too hot too fast and shutting down on purpose. Also last week my secondary system, was doing the EXACT identical thing, and it turned out my video card had just up and died, which was very weird.
ı try with cpu cooler once but same problem. I touch the cpu and its cold. thermaltake frio mounting very hard and ı'm lazy. my problem is not cpu cooling im sure.
post #8917 of 13159
Quote:
Originally Posted by Cyberpunk2077 View Post

ı try with cpu cooler once but same problem. I touch the cpu and its cold. thermaltake frio mounting very hard and ı'm lazy. my problem is not cpu cooling im sure.
Yeah I agree, I am 99% sure too it isn't cooling, but still. Can you lay the system on its side, put a very small drop of tim and then just sit the sink on it? I've done that many times with hard to install sinks that you just need to test the CPU real quick. But again, yeah its probably not heat causing that symptom.

Try cleaning up those marked pads, maybe you will get lucky, otherwise I think you got a damaged CPU bud. Hope it was super cheap and the seller reimburses you quickly, or sends you another without any arguments.
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
post #8918 of 13159
Quote:
Originally Posted by }SkOrPn--' View Post

Yeah I agree, I am 99% sure too it isn't cooling, but still. Can you lay the system on its side, put a very small drop of tim and then just sit the sink on it? I've done that many times with hard to install sinks that you just need to test the CPU real quick. But again, yeah its probably not heat causing that symptom.

Try cleaning up those marked pads, maybe you will get lucky, otherwise I think you got a damaged CPU bud. Hope it was super cheap and the seller reimburses you quickly, or sends you another without any arguments.
Thanks,ı will try and ı'm gonna contact seller for refund.
post #8919 of 13159
Yeah good luck. Lets hope he takes your word for it and just refunds you. Would you not want to try a second one?
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
The }SkOrPn--'
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon X5650 @ 4.0 Ghz Rampage III Extreme w/latest Xeon microcode Asus Radeon HD 5870 12GB G-Skill RipJaws 1600 mhz 
Hard DriveCoolingCoolingCooling
Samsung SM961 Swiftech Apogee GTZ EK FC5870 Acetal+Copper Swiftech MCP655 
CoolingCoolingCoolingCooling
ThermoChill PA120.3 6 Gentle Typhoons AP-15 XSPC Dual Bay "EyeBall" Res PrimoFlex Pro LRT UV Green 1/2" 
OSOSMonitorMonitor
Windows 10 Pro 64bit Manjaro Linux Custom 2560x1440 Debezelled IPS Dell UltraSharp 2405FPW 24" 
KeyboardPowerCaseMouse
Logitech K800 Ultra X3 1kW SilverStone TJ07 Logitech Performance MX 
Mouse PadAudioOther
Razer ExactMat "X" Control Logitech Z5500 USB 3.1 x4 PCIe 
  hide details  
Reply
post #8920 of 13159
Quote:
Originally Posted by }SkOrPn--' View Post

Yeah good luck. Lets hope he takes your word for it and just refunds you. Would you not want to try a second one?
Yeah ı'm going to try too cleaning pads,sorry for my bad english smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › [Official] - X58 Xeon Club -