Originally Posted by greg1184
Hey I have a question about the primochill reservoir. I just got the same one you have but the frosted one.
How did you get it installed. My Phanteks Enthoo Primo has a side reservoir bracket with screw holes, but the holes of the reservoir is slightly wider than the screw holes of the bracket. Enough that I couldn't put the 2nd screw on. Very annoying because I like the looks of the reservoir and thought the groundglass effect with the frost would look great with the UV coolant that I was going to use.
I have the d5 pump enabled res which comes with the preinstalled mounting brackets. I had to drill holes through my motherboard tray to mount it. I used the black templates, put them on my reservoir/mount assembly, then taped the two templates together. After that I positioned the templates (still taped together) against the motherboard in the area I would be fastening the res. I then traced the template holes with a pen or pencil and used a hand drill to drill the holes through the motherboard tray.