Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [BuildLog] Transplanting Destrto3 in a 750D
New Posts  All Forums:Forum Nav:

[BuildLog] Transplanting Destrto3 in a 750D - Page 2

post #11 of 19
Quote:
Originally Posted by Destrto View Post

Thanks for the tip about the bucket of water. I'll definitely have to try that.

What do you do when you come across a spot where you need to make 2 bends right next to each other? I will not be using any angle fittings whatsoever on this build.

I also realised last night that I'm going to need more than just 8 feet of this acrylic tubing for all of my bends. Haha.


To make two bends close together you have to make your first bend and make sure that cools completely. Then start to heat up the other part of the tube where the next bend will be - you just have to be careful to not heat the first bend if possible. This is where careful, slow heating and steady pressure will keep you from ruining both bends.

Yes, you will definitely need more than 8 feet. I started with 18 feet and I was only left with about a foot after all was said and done. I did re-do one run though.

Quote:
Originally Posted by Destrto View Post

Here are a few photos of my unboxing and inspection last night. 56k Warning: Photos! (Click to show)







My thoughts: I wasn't happy about the difference in fan color in person, compared to how they looked online. They're more of a greenish color in person. Not a terribly big deal, as none of those fans will be visible. I relocated the rear exhaust fan to top exhaust in front of my 240mm radiator.

With all of these fans installed now, I'll have to modify my 4port fan hub to run at either 5v or 7v full time, since there isn't a toggle like I have on my 500R. I'll be interested myself to see how I get all of these fan wires arranged behind the motherboard tray. May have to do some finagling. Lol.

One question I haven't answered yet is how exactly I'm going to mount my EK Res/Pump. Even though I want it to be sitting on top of the HDD cage, it may not be able to. Since my 270x's pcb board is at least an inch or so longer than my 6850, I cannot get a good indication of how close they will come to each other.

Yeah the fans in my 750D were mostly gray but I wound up painting the one rear fan black. (The blades just pop right off the frame). These should help your fan wiring: http://www.frozencpu.com/cat/l3/g34/c17/s424/list/p1/Bay_Devices-Fan_Controllers-Multi_Fan_Ports-Page1.html

I removed both cages in my 750D so my setup is a little different but you can still check my Simply Green build log to see how I mounted the pump on the tray.
Simply Green
(24 items)
 
NAS
(11 items)
 
CPUMotherboardGraphicsGraphics
Core i5 4670k Gigabyte G1.Sniper Z87 - ATX - LGA 1150 Zotac GeForce GTX 760 2GB Zotac GeForce GTX 760 2GB 
RAMHard DriveHard DriveCooling
G.Skill Sniper 8GB (2 x 4GB) DDR3-1600 Memory  Samsung 840 EVO 120GB 2.5" Solid State Disk Samsung 850 EVO 120GB 2.5" Solid State Disk EK-Supreme LTX - Nickel CSQ 
CoolingCoolingCoolingCooling
XSPC RX 360 Monsoon Hardline Economy Fittings - Matte Black Bitspower Rotary 90 Degree Fittings - Matte Black NoiseBlocker Black Silent Pro PLPS PWM 120mm (Q... 
CoolingCoolingCoolingCooling
Aquacomputer Aquaero 5 LT EK D5 Vario Pump with X-Top Bitspower Water Tank Z-Multi 150 V2 1/2" x 3/8" PETG Rigid tubing 
CoolingCoolingCoolingCooling
EK-FC670 GTX (Qty 2) EK-FC670 GTX Backplate - Black (Qty 2) EK-FC Bridge DUAL Parallel 3-Slot CSQ Plexi XSPC RX 240 
OSPowerCaseOther
Windows 7 Professional 64-Bit Corsair AX760 Corsair Obsidian 750D RGB LED Strips w/ Controller 
  hide details  
Reply
Simply Green
(24 items)
 
NAS
(11 items)
 
CPUMotherboardGraphicsGraphics
Core i5 4670k Gigabyte G1.Sniper Z87 - ATX - LGA 1150 Zotac GeForce GTX 760 2GB Zotac GeForce GTX 760 2GB 
RAMHard DriveHard DriveCooling
G.Skill Sniper 8GB (2 x 4GB) DDR3-1600 Memory  Samsung 840 EVO 120GB 2.5" Solid State Disk Samsung 850 EVO 120GB 2.5" Solid State Disk EK-Supreme LTX - Nickel CSQ 
CoolingCoolingCoolingCooling
XSPC RX 360 Monsoon Hardline Economy Fittings - Matte Black Bitspower Rotary 90 Degree Fittings - Matte Black NoiseBlocker Black Silent Pro PLPS PWM 120mm (Q... 
CoolingCoolingCoolingCooling
Aquacomputer Aquaero 5 LT EK D5 Vario Pump with X-Top Bitspower Water Tank Z-Multi 150 V2 1/2" x 3/8" PETG Rigid tubing 
CoolingCoolingCoolingCooling
EK-FC670 GTX (Qty 2) EK-FC670 GTX Backplate - Black (Qty 2) EK-FC Bridge DUAL Parallel 3-Slot CSQ Plexi XSPC RX 240 
OSPowerCaseOther
Windows 7 Professional 64-Bit Corsair AX760 Corsair Obsidian 750D RGB LED Strips w/ Controller 
  hide details  
Reply
post #12 of 19
Thread Starter 
Those things you linked are what I have, actually. Since most of the fans are spaced out a ways around the case, I'll have to come up with a sort of Daisy chain to get them all to hook up like I want.

It sucks, but I'm sort of stuck in the mud while I wait on my 270x to return. Don't want to get ahead of myself making bends and then find out the Pump won't fit where I have it.
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
post #13 of 19
Thread Starter 
Just a little update on some progress I've made with bending the tubing. Made a couple bends that won't be at risk of being moved around when the rest of my pieces arrive.


After deciding on placing the pump/res where it's at, it seems as though I might do better with a larger tube res. Especially for filling the loop, as it'll be a bit of a challenge to keep it filled with fluid while priming it to get everything circulating properly.

I tested these 2 tubes for leaks yesterday and things seem to be fitted quite securely. They look cloudy because I haven't rinsed them since I leak tested them.

EDIT: Just want to mention that the small bend at the pump was previously connected to the OUT side of the pump while I leak tested it. I shortened it and switched it to the IN side afterwards. I didn't quite like the counter clockwise direction of the loop.
Edited by Destrto - 6/25/14 at 11:34am
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
post #14 of 19
Thread Starter 
Alright, so those spacers from EK finally arrived yesterday. So I hunkered down and spent 8 hours yesterday finishing the tubing bends and getting everything moved into the 750D. I still have some cleaning up to do as far as wires, but it's up and running smooth!






The loop flows clockwise, starting at the pump/res. So it goes Pump/res>GPU>120 Rad>CPU>240 Rad>240 Rad.

I have the 3 140's that came with the 750D plugged into a 5 fan adapter I got form FCPU. They were quiet at 12V so I left them to run at full speed.

The 5 120mm fans are plugged into the Bitfenix Recon, (2 separately, 3 daisy chained into one plug) along with a water temp probe for the pump/res.
Edited by Destrto - 7/6/14 at 1:18pm
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
post #15 of 19
Nice job thumb.gif

Make sure you leak test for a few hours before leaving it running unattended. I use the same fittings and they look like they could be problematic if they aren't positioned just right. (but once they are they're fine smile.gif )
Simply Green
(24 items)
 
NAS
(11 items)
 
CPUMotherboardGraphicsGraphics
Core i5 4670k Gigabyte G1.Sniper Z87 - ATX - LGA 1150 Zotac GeForce GTX 760 2GB Zotac GeForce GTX 760 2GB 
RAMHard DriveHard DriveCooling
G.Skill Sniper 8GB (2 x 4GB) DDR3-1600 Memory  Samsung 840 EVO 120GB 2.5" Solid State Disk Samsung 850 EVO 120GB 2.5" Solid State Disk EK-Supreme LTX - Nickel CSQ 
CoolingCoolingCoolingCooling
XSPC RX 360 Monsoon Hardline Economy Fittings - Matte Black Bitspower Rotary 90 Degree Fittings - Matte Black NoiseBlocker Black Silent Pro PLPS PWM 120mm (Q... 
CoolingCoolingCoolingCooling
Aquacomputer Aquaero 5 LT EK D5 Vario Pump with X-Top Bitspower Water Tank Z-Multi 150 V2 1/2" x 3/8" PETG Rigid tubing 
CoolingCoolingCoolingCooling
EK-FC670 GTX (Qty 2) EK-FC670 GTX Backplate - Black (Qty 2) EK-FC Bridge DUAL Parallel 3-Slot CSQ Plexi XSPC RX 240 
OSPowerCaseOther
Windows 7 Professional 64-Bit Corsair AX760 Corsair Obsidian 750D RGB LED Strips w/ Controller 
  hide details  
Reply
Simply Green
(24 items)
 
NAS
(11 items)
 
CPUMotherboardGraphicsGraphics
Core i5 4670k Gigabyte G1.Sniper Z87 - ATX - LGA 1150 Zotac GeForce GTX 760 2GB Zotac GeForce GTX 760 2GB 
RAMHard DriveHard DriveCooling
G.Skill Sniper 8GB (2 x 4GB) DDR3-1600 Memory  Samsung 840 EVO 120GB 2.5" Solid State Disk Samsung 850 EVO 120GB 2.5" Solid State Disk EK-Supreme LTX - Nickel CSQ 
CoolingCoolingCoolingCooling
XSPC RX 360 Monsoon Hardline Economy Fittings - Matte Black Bitspower Rotary 90 Degree Fittings - Matte Black NoiseBlocker Black Silent Pro PLPS PWM 120mm (Q... 
CoolingCoolingCoolingCooling
Aquacomputer Aquaero 5 LT EK D5 Vario Pump with X-Top Bitspower Water Tank Z-Multi 150 V2 1/2" x 3/8" PETG Rigid tubing 
CoolingCoolingCoolingCooling
EK-FC670 GTX (Qty 2) EK-FC670 GTX Backplate - Black (Qty 2) EK-FC Bridge DUAL Parallel 3-Slot CSQ Plexi XSPC RX 240 
OSPowerCaseOther
Windows 7 Professional 64-Bit Corsair AX760 Corsair Obsidian 750D RGB LED Strips w/ Controller 
  hide details  
Reply
post #16 of 19
Thread Starter 
Quote:
Originally Posted by Slider46 View Post

Nice job thumb.gif

Make sure you leak test for a few hours before leaving it running unattended. I use the same fittings and they look like they could be problematic if they aren't positioned just right. (but once they are they're fine smile.gif )

Thanks! I'm not 100% happy with the run from the CPU to the top 240, but with my NB heatsink in the way, I can't do anything about it. I ran it overnight with just a spare PSU powering the pump to test, woke up and everything was still dry.

I know what you mean though about how they could be problematic unless you have them tightened down thoroughly. I made sure I got them as tight as I could beforehand.

Now, my only tasks are to figure out why I can't create a custom fan profile with this Bitfenix Recon, and make a set of LED strips to run along the inside.
Edited by Destrto - 7/7/14 at 10:09am
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
post #17 of 19
Thread Starter 
Alright, so I've been thinking about re sleeving some of my cables. And I'm having trouble deciding which new color scheme I should go with.

Any suggestions from you guys?
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
post #18 of 19
Quote:
Originally Posted by Destrto View Post

Alright, so I've been thinking about re sleeving some of my cables. And I'm having trouble deciding which new color scheme I should go with.

Any suggestions from you guys?

I'd try to tie in the colors you already have - red/purple (ram) blue (mobo connectors). Maybe blue/black sleeving? Also consider what color coolant you want. Pastel coolants really seem to do a nice job of tying things together or can offer great contrast depending on what you want.
Simply Green
(24 items)
 
NAS
(11 items)
 
CPUMotherboardGraphicsGraphics
Core i5 4670k Gigabyte G1.Sniper Z87 - ATX - LGA 1150 Zotac GeForce GTX 760 2GB Zotac GeForce GTX 760 2GB 
RAMHard DriveHard DriveCooling
G.Skill Sniper 8GB (2 x 4GB) DDR3-1600 Memory  Samsung 840 EVO 120GB 2.5" Solid State Disk Samsung 850 EVO 120GB 2.5" Solid State Disk EK-Supreme LTX - Nickel CSQ 
CoolingCoolingCoolingCooling
XSPC RX 360 Monsoon Hardline Economy Fittings - Matte Black Bitspower Rotary 90 Degree Fittings - Matte Black NoiseBlocker Black Silent Pro PLPS PWM 120mm (Q... 
CoolingCoolingCoolingCooling
Aquacomputer Aquaero 5 LT EK D5 Vario Pump with X-Top Bitspower Water Tank Z-Multi 150 V2 1/2" x 3/8" PETG Rigid tubing 
CoolingCoolingCoolingCooling
EK-FC670 GTX (Qty 2) EK-FC670 GTX Backplate - Black (Qty 2) EK-FC Bridge DUAL Parallel 3-Slot CSQ Plexi XSPC RX 240 
OSPowerCaseOther
Windows 7 Professional 64-Bit Corsair AX760 Corsair Obsidian 750D RGB LED Strips w/ Controller 
  hide details  
Reply
Simply Green
(24 items)
 
NAS
(11 items)
 
CPUMotherboardGraphicsGraphics
Core i5 4670k Gigabyte G1.Sniper Z87 - ATX - LGA 1150 Zotac GeForce GTX 760 2GB Zotac GeForce GTX 760 2GB 
RAMHard DriveHard DriveCooling
G.Skill Sniper 8GB (2 x 4GB) DDR3-1600 Memory  Samsung 840 EVO 120GB 2.5" Solid State Disk Samsung 850 EVO 120GB 2.5" Solid State Disk EK-Supreme LTX - Nickel CSQ 
CoolingCoolingCoolingCooling
XSPC RX 360 Monsoon Hardline Economy Fittings - Matte Black Bitspower Rotary 90 Degree Fittings - Matte Black NoiseBlocker Black Silent Pro PLPS PWM 120mm (Q... 
CoolingCoolingCoolingCooling
Aquacomputer Aquaero 5 LT EK D5 Vario Pump with X-Top Bitspower Water Tank Z-Multi 150 V2 1/2" x 3/8" PETG Rigid tubing 
CoolingCoolingCoolingCooling
EK-FC670 GTX (Qty 2) EK-FC670 GTX Backplate - Black (Qty 2) EK-FC Bridge DUAL Parallel 3-Slot CSQ Plexi XSPC RX 240 
OSPowerCaseOther
Windows 7 Professional 64-Bit Corsair AX760 Corsair Obsidian 750D RGB LED Strips w/ Controller 
  hide details  
Reply
post #19 of 19
Thread Starter 
Quote:
Originally Posted by Slider46 View Post

I'd try to tie in the colors you already have - red/purple (ram) blue (mobo connectors). Maybe blue/black sleeving? Also consider what color coolant you want. Pastel coolants really seem to do a nice job of tying things together or can offer great contrast depending on what you want.

Thanks for the input. I appreciate the suggestions.

I'm not so much interested in adding color to my coolant, as I don't want to deal with staining any of the blocks. The less cleanup I would need to do during maintenance the better. Although I agree, having colored coolant would look better, It's not something I want to do yet.

I'm a little interested in adding a contrasting color for accents. Maybe Gray for the main color, and then something else to use as the accent. I've had this black and gray sleeving for over a year now, and I want something a bit different now. I'm still looking at options.

The pieces currently in the build, Ram and such with a color already, will be swapped out in the future as this build gets upgrades. I plan to use neutral-ish colors for the new hardware additions.

EDIT: Update about the Bitfenix Recon mention I made last week. I have since fixed that and currently have a very modest fan profile running in Phoebetria. But sadly, for some reason, I cannot get it to run at startup.
Edited by Destrto - 7/15/14 at 1:34pm
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
Destrto3
(17 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8120 M5A99FX PRO R2.0 Radeon R9 270X Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 ... SanDisk Extreme 240 Western Digital WDC WD10 EARS 1TB Seagate ST2000DM 2TB 
Optical DriveCoolingOSMonitor
TSSTcorp CDDVDW SH-222BB EK Supreme LTx (AMD) Windows 8.1 Sceptre 32" LCD Flat Panel TV 
KeyboardPowerCaseMouse
Cooler Master Devastator ThermalTake TR2 RX 850W Corsair Obsidian 750D Cooler Master Devastator 
Audio
OnBoard 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [BuildLog] Transplanting Destrto3 in a 750D