Overclock.net › Forums › Specialty Builds › Small Form Factor Systems › Silverstone Sugo SG13 Mini-ITX Owners Club
New Posts  All Forums:Forum Nav:

Silverstone Sugo SG13 Mini-ITX Owners Club - Page 59

Poll Results: Are you interested in this new Sugo SG13?

 
  • 93% (233)
    Yes
  • 6% (16)
    No
249 Total Votes  
post #581 of 2575
Quote:
Originally Posted by hughesey View Post

I have a H80i with both fans as well as an MSI 970 GTX Gaming AND a 3.5" HDD in my SG13 I just built. It's a bit tight cable wise, but it does fit! The H80i fan touches on the ATX header and USB header on my motherboard (Asus Z79I Plus) but it works. It's only the screws on the fans that touch the headers, if the screw heads were flat it wouldn't touch!

Thanks for the quick reply! So I guess in your case, any thicker radiator wouldn't work at all, then? Can I ask you a few more questions?

Did you use 2 fans or 1?
Are there any extra space on the GPU side or the opposite end?
Which side did you place the radiator end tanks?
    
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE Asus M4N98TD EVO Gigabyte GeForce GTX460 1Gb Overclocked GSkill Ripjaws 2Gb 1600MHz x4 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1Tb x2 Samsung DVD-RW Windows 7 Professional 64-bit/Arch Linux 64-bit Dell U2412 
KeyboardPowerCaseMouse
Microsoft Comfort Curve 2000 Antec TruePower 750W CoolerMaster Advanced II 690 Logitech X-518 
Mouse Pad
Cute flower mouse pad 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE Asus M4N98TD EVO Gigabyte GeForce GTX460 1Gb Overclocked GSkill Ripjaws 2Gb 1600MHz x4 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1Tb x2 Samsung DVD-RW Windows 7 Professional 64-bit/Arch Linux 64-bit Dell U2412 
KeyboardPowerCaseMouse
Microsoft Comfort Curve 2000 Antec TruePower 750W CoolerMaster Advanced II 690 Logitech X-518 
Mouse Pad
Cute flower mouse pad 
  hide details  
Reply
post #582 of 2575
There's a total of 90mm of space between the front of the case and the motherboard.

The h80i res is 38mm, and the two fans 25mm each. This came to 88mm and by themselves there is enough room. The fan screw heads are a few mm tall though and touch on the ATX power header and the USB header on my ASUS Z97i PLUS.

I do have both fans installed. I have the radiator mounted with the hoses to the right side of the case when looking at it from the front (so end tanks on left and right side, not top and bottom). There's only a few mm left between the rad and the case on the right side and only a few mm between the GPU and rad on the left side.

Hope that helps!
post #583 of 2575
Quote:
Originally Posted by hughesey View Post

There's a total of 90mm of space between the front of the case and the motherboard.

The h80i res is 38mm, and the two fans 25mm each. This came to 88mm and by themselves there is enough room. The fan screw heads are a few mm tall though and touch on the ATX power header and the USB header on my ASUS Z97i PLUS.

I do have both fans installed. I have the radiator mounted with the hoses to the right side of the case when looking at it from the front (so end tanks on left and right side, not top and bottom). There's only a few mm left between the rad and the case on the right side and only a few mm between the GPU and rad on the left side.

Hope that helps!
That does help greatly. So I guess it means the T12 is out purely due to the width of the radiator. So I guess it means the H80i is it, then. Are you using the mesh version or the solid version of the SG13 case? How loud are the H80i's fan?
    
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE Asus M4N98TD EVO Gigabyte GeForce GTX460 1Gb Overclocked GSkill Ripjaws 2Gb 1600MHz x4 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1Tb x2 Samsung DVD-RW Windows 7 Professional 64-bit/Arch Linux 64-bit Dell U2412 
KeyboardPowerCaseMouse
Microsoft Comfort Curve 2000 Antec TruePower 750W CoolerMaster Advanced II 690 Logitech X-518 
Mouse Pad
Cute flower mouse pad 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE Asus M4N98TD EVO Gigabyte GeForce GTX460 1Gb Overclocked GSkill Ripjaws 2Gb 1600MHz x4 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1Tb x2 Samsung DVD-RW Windows 7 Professional 64-bit/Arch Linux 64-bit Dell U2412 
KeyboardPowerCaseMouse
Microsoft Comfort Curve 2000 Antec TruePower 750W CoolerMaster Advanced II 690 Logitech X-518 
Mouse Pad
Cute flower mouse pad 
  hide details  
Reply
post #584 of 2575
I'm using the solid version. On full speed the H80i fans are LOUD. On the quiet setting you can barely hear them. I run them at about 1000rpm and they're virtually silent. The pump sound is more noticeable when the fans are on low rpm, but that can't be avoided with an AIO water cooler. From reviews I've read the H80i has one of the quieter pumps of the lot.
post #585 of 2575
Quote:
Originally Posted by hughesey View Post

I'm using the solid version. On full speed the H80i fans are LOUD. On the quiet setting you can barely hear them. I run them at about 1000rpm and they're virtually silent. The pump sound is more noticeable when the fans are on low rpm, but that can't be avoided with an AIO water cooler. From reviews I've read the H80i has one of the quieter pumps of the lot.
Might the noise be attributed to the air rushing from only the side openings of the front panel? Maybe the mesh opening will be better?
    
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE Asus M4N98TD EVO Gigabyte GeForce GTX460 1Gb Overclocked GSkill Ripjaws 2Gb 1600MHz x4 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1Tb x2 Samsung DVD-RW Windows 7 Professional 64-bit/Arch Linux 64-bit Dell U2412 
KeyboardPowerCaseMouse
Microsoft Comfort Curve 2000 Antec TruePower 750W CoolerMaster Advanced II 690 Logitech X-518 
Mouse Pad
Cute flower mouse pad 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 BE Asus M4N98TD EVO Gigabyte GeForce GTX460 1Gb Overclocked GSkill Ripjaws 2Gb 1600MHz x4 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1Tb x2 Samsung DVD-RW Windows 7 Professional 64-bit/Arch Linux 64-bit Dell U2412 
KeyboardPowerCaseMouse
Microsoft Comfort Curve 2000 Antec TruePower 750W CoolerMaster Advanced II 690 Logitech X-518 
Mouse Pad
Cute flower mouse pad 
  hide details  
Reply
post #586 of 2575
Quote:
Originally Posted by GaryC View Post

Might the noise be attributed to the air rushing from only the side openings of the front panel? Maybe the mesh opening will be better?

Any fan going 2000+ RPM will be plenty loud.

The mesh opening may actually be louder since there is less material to block out the noise and there will be a lot of wind turbulence going through the tiny mesh holes. I faced something similar when I mounted radiators on the Bitfenix Prodigy and the fans were mounted right next to the mesh front.
    
CPUMotherboardGraphicsRAM
Intel i5 3570K [Delid] Asrock Z77E-ITX XFX Radeon R9 Fury X G.SKILL 2133MHz 8GB DDR3 
Hard DriveHard DriveHard DriveHard Drive
Crucial M4 256GB Silicon Power S60 120GB Western Digital Blue Scorpio 1TB Seagate Constellation 2 1TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II XSPC RX240+EX240 [Painted White] 5x 2150RPM Gentle Typhoons PWM [Painted Black+W... Bitspower Water Tank Z-Multi 80 Inline Reservoir  
OSMonitorMonitorKeyboard
Windows 10 LG 34UC88-B 34" Ultrawide 3440x1440 75Hz HP ZR2240w IPS WASD CODE 87-Key [MX Clear + PBT Keycaps] 
PowerCaseMouseAudio
Seasonix X-750 Case Labs Mercury S3 Logitech G502 Sennheiser HD 598 SE 
Audio
Micca OriGen 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 3570K [Delid] Asrock Z77E-ITX XFX Radeon R9 Fury X G.SKILL 2133MHz 8GB DDR3 
Hard DriveHard DriveHard DriveHard Drive
Crucial M4 256GB Silicon Power S60 120GB Western Digital Blue Scorpio 1TB Seagate Constellation 2 1TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II XSPC RX240+EX240 [Painted White] 5x 2150RPM Gentle Typhoons PWM [Painted Black+W... Bitspower Water Tank Z-Multi 80 Inline Reservoir  
OSMonitorMonitorKeyboard
Windows 10 LG 34UC88-B 34" Ultrawide 3440x1440 75Hz HP ZR2240w IPS WASD CODE 87-Key [MX Clear + PBT Keycaps] 
PowerCaseMouseAudio
Seasonix X-750 Case Labs Mercury S3 Logitech G502 Sennheiser HD 598 SE 
Audio
Micca OriGen 
  hide details  
Reply
post #587 of 2575
will my hd 7950 ( without heatsink on it because "RED-Mod"ed ) fit in this case???
post #588 of 2575
Received this case on Monday. First impressions were how tint this thing is. I originally planned on swapping my current HTPC hardware into it (i5 4570, Gigabyte GA-Z87 wifi, 8gb ram, Gtx 580, Seasonic 650w psu, Samsung 840 evo) but I was a little disappointed at cpu temps. Gpu temps were fine, about 37c idle and ~43c during file playback (I keep all my movies, tv, anime on my NAS) but the cpu temps would fluctuate from low 40s to mid/upper 50s after say 10mins. I am using the stock HSF and a 120mm Noctua low noise fan (about 800rpms). I can't hear that fan from where I watch tv, rarely hear the gpu, but that damn cpu cooler fan is annoying. Also a little coil whine from the gpu though. I had the psu intake facing into the case.

Would you guys recommend the gpu intake facing up? What about an aftermarket HSF? Only problem is my cpu has an 84w tdp, so the nh-l9i I was looking at isn't really recommend for it. I was looking at a small AIO water cooling, which fit in the case but still allow a full size gpu? I believe an h55 does. How would temps on the rest of the mobo be with it though?

Thanks!
post #589 of 2575
I have case with psu 16cm , and want buy psu sfx or sfx-L , silverstone, which recoomend ?
post #590 of 2575
Man this thread has been super helpful in learning more about this awesome little case! I'm hoping to build my own little power house soon! Here's my current build list:

PCPartPicker part list: http://pcpartpicker.com/p/7c3KLk
Price breakdown by merchant: http://pcpartpicker.com/p/7c3KLk/by_merchant/

CPU: Intel Xeon E3-1231 V3 3.4GHz Quad-Core Processor ($231.95 @ SuperBiiz)
CPU Cooler: Zalman CNPS8900 Quiet CPU Cooler ($23.99 @ Newegg)
Motherboard: Asus H97I-PLUS Mini ITX LGA1150 Motherboard ($90.99 @ SuperBiiz)
Memory: G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1600 Memory ($59.99 @ Newegg)
Storage: Samsung 850 EVO-Series 250GB 2.5" Solid State Drive ($97.95 @ SuperBiiz)
Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive ($48.60 @ SuperBiiz)
Video Card: PNY GeForce GTX 970 4GB XLR8 Video Card ($298.99 @ Newegg)
Case: Silverstone Sugo SG13B Mini ITX Tower Case ($55.23 @ Amazon)
Power Supply: Silverstone 500W 80+ Gold Certified Fully-Modular SFX Power Supply ($94.99 @ NCIX US)
Case Fan: Noctua NF-P14 FLX 65.0 CFM 140mm Fan ($16.98 @ OutletPC)
Total: $1019.66
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2015-05-20 20:35 EDT-0400

I decided to go with the reference card because the blower design is supposed to be better at expelling heat than axial designs. I am going with an SFX power supply for a little more breathing room in the box. I have no experience with liquid cooling, so I would rather not do it unless air coolers aren't going to cut it. I won't be overclocking (hence the Xeon processor). What are your thoughts on this build? Any advice or recommendations would be much appreciated! smile.gif
Edited by kimboschlice - 5/20/15 at 5:48pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Small Form Factor Systems
Overclock.net › Forums › Specialty Builds › Small Form Factor Systems › Silverstone Sugo SG13 Mini-ITX Owners Club