Finishing touches on the extensions cover for the fans opening
Quick installation and verification
As mentioned I do largest grids and here is the mounting.
The two side grids
And the Top
I am happy to announce that a new SPONSOR decided to participate in the realization of my Project!
I wish to thank DEMCiflex Computers and Electronics Dust filters and in particular Roxanne for the support
I'm working on a project dedicated to BITSPOWER's Tanks, Dangerous Tanks (sorry theatricality) that I carry with friends of Extreme Modding Factory, in July and August I and my friend C3r34L3 were busy and we were unable to meet ,
so I studied and made further modification to this project to be inserted inside, I thank my friend Danilo and his laser
Now put the EK logo inside a tank is pretty easy, but put the Bitspower logo is a bit 'more complex, given the size and the various details you need a laser and the design still has to be slightly modified, as we discovered.
As mentioned before we did some test, because I wanted to see my ideas in real (sometimes they are unrealizable)
A version only engraved, not just the effect I wanted
And a perforated version
first version with too small details, the laser has detached them
second version with larger details but very close, the result was not perfect, too fragile
lastly changing a bit 'design I got the desired result
Notice the size
And here is the version installed on his base
Then I put the anticyclone inside the Tank
Exactly what I had thought, besides the measures are designed to be compatible with the mod that I will do outside the Tank.
Add some water
As you know I wanted to use 2 Tanks, but then I decided I put them outside and so I think .......
WHY DON'T USE 4 TANKs!