Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] 900D MONSTER XTREME 2.0 - EVGA X99 Classified - i7-5960x - 4 EVGA TITAN X SC - 64 GBs DDR4 CORSAIR PLATINUM 3000
New Posts  All Forums:Forum Nav:

[SPONSORED] 900D MONSTER XTREME 2.0 - EVGA X99 Classified - i7-5960x - 4 EVGA TITAN X SC - 64 GBs DDR4 CORSAIR PLATINUM 3000 - Page 8

post #71 of 205
Thread Starter 

I used Dimastech's bay supports and I've fixed them on the Cooling Towers

 

                     


Edited by The Colonel - 10/21/14 at 1:38pm
post #72 of 205
Thread Starter 

The perforated sheeting built on my design has finally arrived,  so I can proceed with a new phase of construction!

 

  

 

and arrived from the USA also EVGA X-79 Dark's WBs made ​​by modder nateman_doo

 

  


Edited by The Colonel - 10/17/14 at 5:24am
post #73 of 205
Updates?! smile.gif
post #74 of 205

Wow! Look at all that hardware. This is going to be a monster case on steroids! You have me subbed and curious!

 

post #75 of 205
Thread Starter 
Quote:
Originally Posted by nateman_doo View Post

Updates?! smile.gif

 

 

Quote:
Originally Posted by Shoultz101 View Post
 

Wow! Look at all that hardware. This is going to be a monster case on steroids! You have me subbed and curious!

 

 Thank you Bro!

 

A special Thank to nateman_doo, I'm your fan Bro :specool:, and I'm a A-Team fan too,

 

 

And sorry for the wait!

Now we GO!  

post #76 of 205
Thread Starter 

I then modified the front where now will be 4 140mm fans

 

                 

 

and here's the new piece fitted

 

 


Edited by The Colonel - 10/23/14 at 11:21pm
post #77 of 205
Thread Starter 

These are the two fronts that I want to become equal

 

 

so at work!

 

    

 

On these parts I also want to add a LED system, which illuminates laterally

 

 

 

I therefore build the support for such LED system

 

          

 

and I have fixed one of them on the frontal

 

       

 

here is the final effect

 

    


Edited by The Colonel - 10/23/14 at 11:22pm
post #78 of 205
Thread Starter 

I have to do the same work on the rear panel of the 900D, with some difference

 

                   

 

I had to build a edge on which to attach the aluminum plate

 

       

 

as for the frontal I built a support the LED system

 

  

 

and I assembled it

 

 

On the rear panel, however, there were no openings from which I want to get out the light, I therefore created  and perfecting also those in the frontal

 

            

 

and here as look the fans block in its slot

 

   


Edited by The Colonel - 10/23/14 at 11:25pm
post #79 of 205
Thread Starter 

Other small changes to the 900D, I went to cap the many holes that are present on the bottom so that when it is in operation and equipped with filters the entry of dust will be minimal

 

            

 

I then re-riveted the case parts together even staring  the  aluminum band and reassembled the fans support below

 

  

 

I have also perfected the attachment of the side panel

 

        


Edited by The Colonel - 10/23/14 at 11:27pm
post #80 of 205
Thread Starter 

Meanwhile, inspired by the legendary (and crazy) Bill Owen of Mnpc Tech (do you know him ? :lol: )

I designed to realize removable grille covers on all the houses of this kind:

 

 

However, I haven't found in Italy the perforated sheet such as that used in the work by Bill (with 4 mm hole, 5 mm pitch, Offset of 60°, 1 mm thick, preferably aluminum), in huge quantities and good price.

I then found an Italian site, OIB, which makes customized metal sheets and I've ordered a huge quantity, 4 mq cut into 4 sheets of 1 x 1 m.

 

 

I also designed the several aluminum frames to be ordered from lasermio.it

 

  

 

The sheet ordered by OIB, that fully meets expectations, notice the difference with the one found in the hardware chain,  the % full / empty is very different:

 

 

  

 

and cames the parcel from lasermio with frames

 

       


Edited by The Colonel - 10/23/14 at 11:28pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sponsored Builds & Case Mods
Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] 900D MONSTER XTREME 2.0 - EVGA X99 Classified - i7-5960x - 4 EVGA TITAN X SC - 64 GBs DDR4 CORSAIR PLATINUM 3000