Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Machine X Beast
New Posts  All Forums:Forum Nav:

Machine X Beast - Page 6

post #51 of 82
Thread Starter 
next step was UV leds
I use Female DuPont Cables for Arduino, for LED so i can simple change the LED if it stop working


post #52 of 82
Thread Starter 
and of course i sleeved it


post #53 of 82
Thread Starter 
to mounting the led i use cable holders for easy change or repair


post #54 of 82
Thread Starter 
next buttons
i use obviously power and reset switch
two buttons for LEDs one for RGB LEDs and one for UV LEDs
and one for power button


post #55 of 82
Thread Starter 
in case i need completely turn off power from PSU i made extension cable for PSU with switch, because i would not have straight access to PSU switch


post #56 of 82
Thread Starter 
to mouth PSU i use velcro strips



post #57 of 82
Thread Starter 
Next step is hide all cables biggrin.gif








post #58 of 82
Thread Starter 
now i mount the plexiglass with SSDs as a cover for PSU


post #59 of 82
Thread Starter 
but i make some mistake
i won't be able to mount the intake 200 mm fans i miss about 20-30 mm so i cut the hole in front of plexiglass


but as you can see the plexiglass cracked a little bit, but i leave it, because the foil is hold it together
post #60 of 82
Thread Starter 
than i sleeved the fan cables







it looks so much better
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Machine X Beast