Overclock.net › Forums › Cooling › Water Cooling › Do I have enough radiators?
New Posts  All Forums:Forum Nav:

Do I have enough radiators?

post #1 of 2
Thread Starter 
Hi, this is my first thread here, and sorry if this has been asked before.
I need to cool an i7 4770k and two GTX 780s. Would one 2x120mm and one 140mm (both slim, I was looking at these:
http://www.frozencpu.com/products/23897/ex-rad-685/Black_Ice_Nemesis_GT_Stealth_240_Radiator_-_Black.html?tl=g30c95s160
and
http://www.frozencpu.com/products/9012/ex-rad-153/Black_Ice_GT_Stealth_140_Radiator_-_Black.html?tl=g30c95s929 )
be enough to cool these components? My case is a Prodigy M, so space is.. limited, to say the least (lol). I might be able to squeeze an additional 200mm radiator in there if absolutely necessary.
Also, cpu block/pump combos: are they any good? (like this one: http://www.swiftech.com/ApogeeDrive2.aspx ) Since I'm trying to be as space-efficient as possible, this looked interesting. But I don't want to compromise on pump quality either. Thoughts?
Thanks in advance!
post #2 of 2
Probably.

As long as you dont overclock the 780's too much and as long as you dont run really low fan RPM's i think you can get away with it.

If you can do a 2x120 and a 200mm that would actually be sufficient. Your temps on load might be around 50-60's on water cooling with that little rad space but if you use the 200mm instead of 140mm it would probably be even more beneficial.

If you cant squeeze 200mm try 180mm or a diff size? I mean youre just fitting one, so i figured you'll only need one fan.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Do I have enough radiators?