Overclock.net › Forums › Intel › Intel CPUs › Intel Pentium G3258 Performance and Owners Club NOW with GTX 970
New Posts  All Forums:Forum Nav:

Intel Pentium G3258 Performance and Owners Club NOW with GTX 970 - Page 125

post #1241 of 4581
Stock, OEM mobo.. So no Overclocking... But did some research and this g3258 should give at least stable 125fps.
But if anyone here plays CS:GO, let me know how it works on 5on5 matches. stock/Oc'd
post #1242 of 4581
Quote:
Originally Posted by Konkistadori View Post

Stock, OEM mobo.. So no Overclocking... But did some research and this g3258 should give at least stable 125fps.
But if anyone here plays CS:GO, let me know how it works on 5on5 matches. stock/Oc'd

I'll jump into a match and let you know.
post #1243 of 4581
Quote:
Originally Posted by hotrod717 View Post

De
Delid that biter. A little clear on the transistors, Gelid or CLU, and you get 15-20*c drop on load temps.


I'm going to be delidding soon, how much polish should I use, and does it matter which brand?
Quote:
Originally Posted by Waan View Post

I'll jump into a match and let you know.

I was pulling 100~ FPS on Dust II with no MSAA at 1080p and everything set to very high. Usually ran at a consistent 130-140 FPS, and less in large fights. Same amount of FPS in 1280 x 720.

Processor is at 4.3GHZ
Edited by Waan - 9/7/14 at 3:46pm
post #1244 of 4581
I'm sure someone would have interest in this to see how fast the G3258 folds PPD wise. Seems to be pretty proportional with my i7-4770k. Clock per clock it gets about 1/4 the PPD of my i7. Stock cooler and 1.8 Vin, 45x multi, 1.2Vcore, 38x uncore, 1.1Vuncore.

post #1245 of 4581
Quote:
Originally Posted by Konkistadori View Post

Stock, OEM mobo.. So no Overclocking... But did some research and this g3258 should give at least stable 125fps.
But if anyone here plays CS:GO, let me know how it works on 5on5 matches. stock/Oc'd

If you're not overclocking then consider the slightly higher clocked g3450 @ 3.4ghz, apparently intel released quite a number of models clocked differently:

http://ark.intel.com/products/family/29862/Intel-Pentium-Processor#@All

edit: nvm the other models are more expensive for some reason gj intel XD
Edited by abctoz - 9/7/14 at 4:49pm
post #1246 of 4581
Quote:
Originally Posted by Waan View Post

I'm going to be delidding soon, how much polish should I use, and does it matter which brand?
It doesn't matter which. Be careful not to get it on the ihs and put just enough on to cover transistors. If you use vise method, be sure to check between hits and pull off. Don't send the lid flying.
    
CPUMotherboardGraphicsRAM
Intel 5820k Asrock x99 OCF V3.1 One of many Kingston HyperX Predator 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO Asus Bluray Custom Water Win7 Ultimate 
MonitorPowerCaseMouse
Asus VG248QE EVGA P1200 Mountain Mods Extended Custom U2-UFO  Mad Catz R.A.T 5 
Mouse PadAudio
steelseries M-Audio BX5a DLX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 5820k Asrock x99 OCF V3.1 One of many Kingston HyperX Predator 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO Asus Bluray Custom Water Win7 Ultimate 
MonitorPowerCaseMouse
Asus VG248QE EVGA P1200 Mountain Mods Extended Custom U2-UFO  Mad Catz R.A.T 5 
Mouse PadAudio
steelseries M-Audio BX5a DLX 
  hide details  
Reply
post #1247 of 4581
Quote:
Originally Posted by Waan View Post

I'm going to be delidding soon, how much polish should I use, and does it matter which brand?
I was pulling 100~ FPS on Dust II with no MSAA at 1080p and everything set to very high. Usually ran at a consistent 130-140 FPS, and less in large fights. Same amount of FPS in 1280 x 720.

Processor is at 4.3GHZ
Thanks!

What GPU you were using? Im using f0rest cfg on csgo. And i always use lowest settings on competitive matches.

Seems to be that cpu is worth to try. smile.gif

So this cpu aint soldered??? D: deliddin sounds interesting if its easy fpr this biggrin.gif... But i guess you need good vrm on mobo for 5ghz oc..
post #1248 of 4581
Quote:
Originally Posted by Konkistadori View Post


Thanks!

What GPU you were using? Im using f0rest cfg on csgo. And i always use lowest settings on competitive matches.

Seems to be that cpu is worth to try. smile.gif

So this cpu aint soldered??? D: deliddin sounds interesting if its easy fpr this biggrin.gif... But i guess you need good vrm on mobo for 5ghz oc..

I've got a R9 270x. Nope, no solder on Devil's Canyon chips. biggrin.gif
post #1249 of 4581
Transparent Nail polish on chips after delid, buy some metal sand paper with gr500-gr800-gr1000-gr1300-gr1500-gr2000 and lap on a flat surface (glass table or a mirror) the IHS. Use alchool to clean the IHS.
Put some liquid ultra or similar between the two and you are done.


PS: Is there the possibility to have a decent bios for asrock z97m anniversary edition?? Maybe contacting asrock... i put some screenshots of their bios and you will understand why I'm complaning.

1) No imput voltage regulation
2)Cannot select which core i want enabled\disabled
3)No LLC (but voltages are perfect)
4)No slow mode (optional but may be usefoul)

So my frequency @4956MHz ar at stock VID (1.7v)!!!
Edited by IOWA - 9/8/14 at 4:04am
post #1250 of 4581
I ordered some 1000, 1500 grit sandpaper and some CLU today. Can't wait to delid and lap the IHS!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Intel Pentium G3258 Performance and Owners Club NOW with GTX 970