Overclock.net › Forums › Intel › Intel CPUs › Intel Pentium G3258 Performance and Owners Club NOW with GTX 970
New Posts  All Forums:Forum Nav:

Intel Pentium G3258 Performance and Owners Club NOW with GTX 970 - Page 207

post #2061 of 4581
My clocks are 4.2ghz right now fully stable 24 hour stress. I'm happy with the way it's performing and settling there. Heat is reasonable at 1.26 volts. Now time to overclock the ram and video card.
post #2062 of 4581
hi guys
just got my g3258 and asrock h81m-itx board, threw it together with some parts i had laying around.
fsp psu, gigabyte 7950, 1tb hdd, corsair h60 se, unmatched 2 x4gb ram (bf4 just wont run smooth on 4gb)
updated to latest bios
hit overclock non k processor 4.4Ghz
bumped the multiplier to 45
dropped voltage to 1.31, auto'd to 1.45! (will attempt to drop lower 1.28 was no good)
ram running at 1600 on xmp profile
been running prime 95 for 1hr sitting around 70 has hit 74

what else can i tweak?
is it resaonable to expect to go much higher?
this is my first real overclock, really wanna play around a bit
(getting ready to watercool my main rig and want to be a little more confident with pushing an overclock)
post #2063 of 4581
Quote:
Originally Posted by Pin4e View Post

hi guys
just got my g3258 and asrock h81m-itx board, threw it together with some parts i had laying around.
fsp psu, gigabyte 7950, 1tb hdd, corsair h60 se, unmatched 2 x4gb ram (bf4 just wont run smooth on 4gb)
updated to latest bios
hit overclock non k processor 4.4Ghz
bumped the multiplier to 45
dropped voltage to 1.31, auto'd to 1.45! (will attempt to drop lower 1.28 was no good)
ram running at 1600 on xmp profile
been running prime 95 for 1hr sitting around 70 has hit 74

what else can i tweak?
is it resaonable to expect to go much higher?
this is my first real overclock, really wanna play around a bit
(getting ready to watercool my main rig and want to be a little more confident with pushing an overclock)

looks like your on the right track. I would turn off the non z overclock and just enter all the values in manually. Im not certain if it changes anything else so just to be sure switch it off.

Mobo manufacturers are notorious for using too much voltage when auto overclocking.
Cable box
(24 items)
 
Phat Bits
(16 items)
 
Lament Box
(16 items)
 
CPUMotherboardGraphicsRAM
i7-4790K 4.8ghz @ 1.245v Asus Maximus Hero VI 4GB Asus Strix GTX 980 Gskil Trident 2400 CL10 
Hard DriveHard DriveHard DriveOptical Drive
128GB sandisk extreme SSD 2 tb Western digital media intel 530 128 gb SSD External LG BD RW 
CoolingCoolingCoolingCooling
EK Coolstream 360mm PE Rad  Gentle typhoon AP-15 X 3 Fractal Design 140mm 1000RPM X3 Fractal Design Venturi High Flow Series 140mm F... 
CoolingCoolingCoolingCooling
Bitspower DDC Heatsink Black EK Coolstream XTC 140mm Rad EK Supremecy MX  EK FC980 Strix Water Block 
CoolingCoolingOSKeyboard
swiftech MCP-35X EK XRES 140 DDC Top WIN 7 ULTIMATE smk link 
PowerCaseMouseOther
Seasonic G-750  Fractal Design R5 G700s HDHOMERUN 3 TUNER CABLE CARD 
CPUMotherboardGraphicsRAM
4770k 4.5ghz @1.29v asus z87-A EVGA 4gb GTX 970 FTW 1510mhz 8000mem 1.23v Adata XPG 8GB @ 2400mhz 11-13-13-35-1 
Hard DriveHard DriveCoolingCooling
OCZ VERTEX 3 90GB 1tb 7200 Seagate hybrid  D5 vario Primo chill 120mm D5 Compression Res 
CoolingCoolingCoolingCooling
Swiftech MCR-320 XP 360mm rad Swiftech MCR-320 XP 120mm rad EK Supreme LTX Cpu block Biitspower ACX GTX 970 Water block 
OSKeyboardPowerCase
win7 64bit ultimate G13 Seasonic M211 620 watt Nzxt Guardian 
  hide details  
Reply
Cable box
(24 items)
 
Phat Bits
(16 items)
 
Lament Box
(16 items)
 
CPUMotherboardGraphicsRAM
i7-4790K 4.8ghz @ 1.245v Asus Maximus Hero VI 4GB Asus Strix GTX 980 Gskil Trident 2400 CL10 
Hard DriveHard DriveHard DriveOptical Drive
128GB sandisk extreme SSD 2 tb Western digital media intel 530 128 gb SSD External LG BD RW 
CoolingCoolingCoolingCooling
EK Coolstream 360mm PE Rad  Gentle typhoon AP-15 X 3 Fractal Design 140mm 1000RPM X3 Fractal Design Venturi High Flow Series 140mm F... 
CoolingCoolingCoolingCooling
Bitspower DDC Heatsink Black EK Coolstream XTC 140mm Rad EK Supremecy MX  EK FC980 Strix Water Block 
CoolingCoolingOSKeyboard
swiftech MCP-35X EK XRES 140 DDC Top WIN 7 ULTIMATE smk link 
PowerCaseMouseOther
Seasonic G-750  Fractal Design R5 G700s HDHOMERUN 3 TUNER CABLE CARD 
CPUMotherboardGraphicsRAM
4770k 4.5ghz @1.29v asus z87-A EVGA 4gb GTX 970 FTW 1510mhz 8000mem 1.23v Adata XPG 8GB @ 2400mhz 11-13-13-35-1 
Hard DriveHard DriveCoolingCooling
OCZ VERTEX 3 90GB 1tb 7200 Seagate hybrid  D5 vario Primo chill 120mm D5 Compression Res 
CoolingCoolingCoolingCooling
Swiftech MCR-320 XP 360mm rad Swiftech MCR-320 XP 120mm rad EK Supreme LTX Cpu block Biitspower ACX GTX 970 Water block 
OSKeyboardPowerCase
win7 64bit ultimate G13 Seasonic M211 620 watt Nzxt Guardian 
  hide details  
Reply
post #2064 of 4581
Quote:
Originally Posted by Wirerat View Post

I would turn off the non z overclock .

that never even occurred to me, thanks. I shall do that later and probably be back when it goes horribly wrong smile.gif
post #2065 of 4581
Quote:
Originally Posted by Wirerat View Post

looks like your on the right track. I would turn off the non z overclock and just enter all the values in manually. Im not certain if it changes anything else so just to be sure switch it off.

Mobo manufacturers are notorious for using too much voltage when auto overclocking.

You can try push it to the limit. Core 1.5 max 2.2vccin uncore 1.1v and 35x.
You cam easily run 1.35 daily without problems.
post #2066 of 4581
I feel like ya'll are doing the overclocking out of order..



Set voltage to 1.35v, or 1.41v (if you don't do 24/7 loads)

Check vcore via hwmonitor in windows to confirm voltage output, adjust until you hit either of those..


Then just crank the multiplier as high as you can given that voltage..

THEN... lower until it instant crash, or refuse to post.. and then add back until stable.. then prime 24hrs
Quote:
Originally Posted by DotBeta View Post

Ive noticed xtu does a good job of freezing my rig or bsod'ing me when i think im stable tongue.gif gets temps up there too.
I just meant it as not being an i chip, its definitely a wolf in sheeps clothing smile.gif


I've come up with a better analogy for the g3258...

It's like when Goku (g3258) fought Freeza (i3)...


Freeza (i3) was all like... you saiyans suck..

then Goku (g3258) overclocks to SSJ...

and Freeza was like... OH ****.. !!!!!!


Goku3258
Quote:
Originally Posted by IOWA View Post

You can try push it to the limit. Core 1.5 max 2.2vccin uncore 1.1v and 35x.
You cam easily run 1.35 daily without problems.

1.41v is fine as long as there are no 24/7 loads.
post #2067 of 4581
Quote:
Originally Posted by tp4tissue View Post


I've come up with a better analogy for the g3258...

It's like when Goku (g3258) fought Freeza (i3)...


Freeza (i3) was all like... you saiyans suck..

then Goku (g3258) overclocks to SSJ...

and Freeza was like... OH ****.. !!!!!!


Goku3258


HAHAHA smile.gif Nice one man xD so true. smile.gif
post #2068 of 4581
For the sake of the signature, here's the best I could get under 1.3v. Seems like the MSI H97 caps it at that voltage, oh well.

    
CPUMotherboardGraphicsRAM
i5 4690 MSI H97 PC Mate(MS-7850) r9 390 Nitro Corsair Vengeance 4 x 4GB 1600mhz  
Hard DriveHard DriveHard DriveOptical Drive
Crucial MX 200 256 SSD Toshiba 2TB 6.0gb/s External - Seagate 4TB 24X DVD-RW Burner 
CoolingOSMonitorKeyboard
Cooler Master Hyper T4 Windows 10 Home 64-bit Acer IPS 27' 2560 x 1440p Logitech G710 Mechanical 
PowerCaseMouseMouse Pad
Cooler Master V650 Gold Rated Enermax Ostrog Logitech something ?? 
Audio
Realtek Onboard 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5 4690 MSI H97 PC Mate(MS-7850) r9 390 Nitro Corsair Vengeance 4 x 4GB 1600mhz  
Hard DriveHard DriveHard DriveOptical Drive
Crucial MX 200 256 SSD Toshiba 2TB 6.0gb/s External - Seagate 4TB 24X DVD-RW Burner 
CoolingOSMonitorKeyboard
Cooler Master Hyper T4 Windows 10 Home 64-bit Acer IPS 27' 2560 x 1440p Logitech G710 Mechanical 
PowerCaseMouseMouse Pad
Cooler Master V650 Gold Rated Enermax Ostrog Logitech something ?? 
Audio
Realtek Onboard 
  hide details  
Reply
post #2069 of 4581
Quote:
Originally Posted by IOWA View Post

I use 9600GT and HD5850 for this setup, i can play all games but in low res (720p).

Guy I just found my perfect settings. 5.0GHz@1.5V, temps are normal and it is rock solid! Maybe i can try to tweak the system for lowering the vcore but 1.48V is unstable in cinebench.
Do you have suggestions?

VCCIN 2.1V
VRING 1.25V
VCORE 1.5V
BCLK 100.00
UNCORE x40

How did you found that its stable so fast? You posted 1h before this that you got this chip :/
post #2070 of 4581
Quote:
Originally Posted by Coach Mcguirk View Post

For the sake of the signature, here's the best I could get under 1.3v. Seems like the MSI H97 caps it at that voltage, oh well.



Is it stable? (like 50 (+-10) runs of x264)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Intel Pentium G3258 Performance and Owners Club NOW with GTX 970