post #1 of 1
Thread Starter 
Hello All,

This is my first post on so I am sorry if I have started this thread in the wrong location

I have a gigabyte g1 sniper 5 currently installed in my system. I have had a mountain of issues with this computer since i built it and am starting to think they are related to the motherboard.

The computer exhibits some very odd issues.

The bottom card of my sli setup is recognized as the primary despite the fact that the board is defaulted to use the top slot first at startup.

With any kind of overclocking of the either the ram or cpu the system fails to start. It doesn't activate any monitors or proceed to the gigabyte splash page from a cold state and displays a debug code of either 62 or b2. When this happens the computer will always start if i hit the reset button.

And recently when i put the compute in sleep mode it displays a debug code of 03 and loses my nvidia surround settings on wake up and reverts to a single monitor on the primary card.

I am fairly certain the cpu and ram are good as both have passed several runs of prime95 and memtest respectively when the computer boots up.

]System Specs
CPU: i7 4770k @ 4.2
ram: corsair dominator 2133 2x8gb
PSU: corsair ax1200i
Gpu: 2x 780ti gigabyte ghz edition down-clocked to 1100 mhz
OS: Windows 8.1 64 bit

Any ideas?