Overclock.net › Forums › Case Mods & Cases › Computer Cases › *OFFICIAL* Parvum Systems Owners Club
New Posts  All Forums:Forum Nav:

*OFFICIAL* Parvum Systems Owners Club - Page 397

post #3961 of 5364
Quote:
Originally Posted by akira749 View Post

If you go on the 1st post of this thread you'll find a spoiler section for the "S2.0 Case Assembly". If you open the spoiler you'll find a spoiler for the "Power Switch & USB 3.0". Inside you'll find detailed pictures that should help. thumb.gif

Once again, the one in the video does not match my power switch. the orientation of the connectors does not match mine, nor does the video tell which colors goes to connector X, Y etc. The screenshots is just from the video under that spoiler tag. tongue.gif
post #3962 of 5364
So how do you screw the gpu in place wit one set of hands?

I need to push the grill towards the gpu and the gpu towards the grill since they only have that much flex each. Then I need to get the screw there kind of tilted and screwing it in place while holding the grill and the gpu. mad.gif

Edit: Lol, I used an old thumbscrew from an old case to hold it in place (it was easier to put there) and then put in the other screw in place and then replaced the thumb screw with a parvum screw. Jeez.

I guess I just have to live with the poor alignement because of gpu weight.
Edited by Votkrath - 8/28/16 at 7:06pm
post #3963 of 5364
Anyone have any tips on covering the remaining two slots if you only use 1 gpu? The mobo is a bit too close to that open space for my liking.
post #3964 of 5364
Quote:
Originally Posted by Votkrath View Post

Anyone have any tips on covering the remaining two slots if you only use 1 gpu? The mobo is a bit too close to that open space for my liking.

Blanks can be purchased in a variety of colours and materials from on line retailers or local electronic stores that sell pc's
post #3965 of 5364
Wooo! Finally ordered a M1.0 biggrin.gif Build log should be coming soon. thumb.gif
post #3966 of 5364
Quote:
Originally Posted by nzphil View Post

Wooo! Finally ordered a M1.0 biggrin.gif Build log should be coming soon. thumb.gif

Look forward to it
post #3967 of 5364
Just ordered Parvum L1.0 and wondered what people use as filters? Just something from china or are there anything spesific? Thinking of using a lot of rad space and want to keep the dust away.
post #3968 of 5364
What's the best size Combe to use with par accord sleeving??
Thanks.
post #3969 of 5364
Quote:
Originally Posted by puuhapeku View Post

Just ordered Parvum L1.0 and wondered what people use as filters? Just something from china or are there anything spesific? Thinking of using a lot of rad space and want to keep the dust away.

I posted this a while back, I got my filters from eBay, that is enough

post #3970 of 5364
Quote:
Originally Posted by 1Scotty1 View Post

I posted this a while back, I got my filters from eBay, that is enough


I have similar filters I got from PerformancePCS. They don't make your rig dust proof, but they do keep it at bay and don't restrict airflow that much. A simple few sprays with computer duster every 3-4 weeks and I've been fine.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › *OFFICIAL* Parvum Systems Owners Club