Overclock.net banner

*OFFICIAL* Parvum Systems Owners Club

581K views 6K replies 358 participants last post by  whaletail934 
#1 ·
VpONj9c.jpg


Welcome to the Official Owners Club for Parvum Systems

Come and post here with anything Parvum be it your build photos, a link to your build log or to just to share with everyone your every thoughts we welcome anything Parvum related. If you have any questions that aren't answered here, or you need something more specific, please feel free to contact our two lovely Hardware Reps @imersa and @Mads1 who will be more than happy to help you.

vzR7cIC.jpg


Based in the UK, Parvum Systems specialises in producing custom acrylic computer cases with a unique and elegant design across their entire range. Beyond what they offer at a retail level Parvum Systems is also open to custom requests to give you the personal, hands on control over your future case allowing you to create that one of a kind look. In addition to their ever growing line of cases Parvum also have their own line of 120mm high pressure case fans which offer excellent performance for both air and water cooled systems.

"Here at Parvum Systems we pride ourselves on making each case with that little extra bit of care and offering a slightly more personal approach to the world of computer cases. "

Don't just take my word for it here are some reviews of our products:

200
200
200
If you write or find any other reviews of our products please message me and I will add them to the list.

Thi296u.jpg


Our current retail line consists of the following six cases however each is able to be customised or changed to your liking.

200

Parvum Systems X2.0 ITX

Specification:
- Dimensions: (WxHxD): 250 x 250 x 310mm
- Orientation: Inverted
- Motherboard Support: ITX
- Maximum CPU Cooler Height: 157mm
- PSU Support: SFX, SFX-L
- Maximum PSU Length: 130mm
- PCI Slots: (2x)
- Maximum GPU Length: 290mm
- External IO: (1x) Power Switch (1x) Power LED
- Drive Mounts: (4x) 2.5"

Fan Mounts:
- Front 1x 120mm or 1x 140mm
- Rear 2x 80mm

Watercooling Support:
- Front 120mm or 140mm

112

PhotoScape

200

Parvum Systems VEER1.0 ITX

Specification:
- Dimensions: (WxHxD): 267 x 307 x 357mm
- Orientation: Inverted
- Motherboard Support: ITX
- Maximum CPU Cooler Height: 150mm
- PSU Support: ATX
- Maximum PSU Length: 160mm
- PCI Slots: (2x)
- Maximum GPU Length: 335mm
- External IO: (1x) Power Switch (1x) Power LED (2x) USB3.0
- Drive Mounts: (2x) 2.5" or (2x) 3.5"

Fan Mounts:
- Front 1x 120mm
- Top 2x 120mm
- Rear 1x 80mm

Watercooling Support:
- Front 120mm
- Top 240mm
25

PhotoScape

200

Parvum Systems R1.0 MATX

Specification:
- Dimensions: (WxHxD): 285 x 387 x 475mm
- Orientation: Inverted
- Motherboard Support: ITX, mATX
- Maximum CPU Cooler Height: 170mm
- PSU Support: ATX
- Maximum PSU Length: 240mm
- PCI Slots: (4x)
- Maximum GPU Length: 420mm
- External IO: (1x) Power Switch (1x) Power LED
- Drive Mounts: (2x) 3.5" and (2x) 2.5"

Fan Mounts:
- Front 2x 120mm
- Bottom 6x 120mm

Watercooling Support:
- Front 240mm
- Bottom 2x 360mm
112

PhotoScape

200

Parvum Systems S2.5 MATX

Specification:
- Dimensions: (WxHxD): 275 x 332 x 420mm
- Orientation: Standard
- Motherboard Support: ITX, mATX
- Maximum CPU Cooler Height: 160mm
- PSU Support: ATX
- Maximum PSU Length: 240mm
- PCI Slots: (4x)
- Maximum GPU Length: 325mm
- External IO: (1x) Power Switch (1x) Power LED (2x) USB3.0
- Drive Mounts: (2x) 2.5" and (2x) 3.5" or (4x) 2.5"

Fan Mounts:
- Front 2x 120mm
- Top 2x 120mm
- Rear 3x 80mm

Watercooling Support:
- Front 240mm
- Top 240mm
25

PhotoScape

200

Parvum Systems M1.0 ATX

Specification:
- Dimensions: (WxHxD): 287 x 452 x 420mm
- Orientation: Standard
- Motherboard Support: ITX, ATX
- Maximum CPU Cooler Height: 170mm
- PSU Support: ATX
- Maximum PSU Length: 240mm
- PCI Slots: (8x)
- Maximum GPU Length: 325mm
- External IO: (1x) Power Switch (1x) Power LED (2x) USB3.0
- Drive Mounts: (2x) 3.5" and (2x) 2.5"

Fan Mounts:
- Front 3x 120mm
- Top 2x 120mm
- Rear 1x 120mm

Watercooling Support:
- Front 360mm
- Top 240mm
25

PhotoScape

200

Parvum Systems L1.0 EATX

Specification:
- Dimensions: (WxHxD): 320 x 600 x 570mm
- Orientation: Standard
- Motherboard Support: ITX, ATX, E-ATX
- Maximum CPU Cooler Height: 200mm
- PSU Support: ATX
- Maximum PSU Length: 280mm
- PCI Slots: (8x)
- Maximum GPU Length: 450mm
- External IO: (1x) Power Switch (1x) Power LED
- Drive Mounts:(4x) 2.5" and (6x) 3.5" or (8x) 2.5"

Fan Mounts:
- Front 4x 120mm
- Top 3x 120mm
- Rear 1x 120mm
- Bottom 6x 120mm

Watercooling Support:
- Front 480mm
- Top 360mm
- Bottom 360mm
98

PhotoScape

Parvum Systems cases are available for order from Performance PC's (US), Overclockers (UK), HighFlow (NL), caseking (DE), and from Parvum Systems directly.

smTMMFM.jpg


Working closely with Premier cooling brand Alpenföhn Parvum is proud to have produced the Parvum F1.0 a high performance modified Wings Boost 2 fan which is now available in both black and white colour schemes using the Wings Boost technology to reduce air turbulence within your system. Find out more by clicking on the picture below.

900

mywx3RR.jpg


Here is a sample of some of the absolutely amazing builds from the members of OCN you can find a full list of Build Logs below please do check them out as all of these guys have put lots of effort into creating these jaw dropping builds. There are many many more that aren't featured in this photo but if I was to include every single photo this thread would be never ending!

lFgmdeE.jpg


:clock:[/CENTER][/CODE]

As a closing note I want to say a big thank you from all of us at Parvum Systems for being part of this ever growing community and we look forward to seeing your amazing builds as they come, so get building!
 
See less See more
1 28
#3 ·
First! Subbed! Whatever!
biggrin.gif


I don't personally have a Parvum case (YET) but I'm loving
the overall design and the amount of work ye put in to make
sure people get what they want in terms of customization,
colour scheme etc.
Been following a few Parvum build logs on OCN so this will
be an awesome thread, I'm sure of that.

Keep up the good work!
thumb.gif
 
#4 ·
I shall start the owners submissions with my build. I'd also like to mention to anyone looking into a Parvum case that you will not find a more fun case to work with. It's hands down the best case I've worked with thus far, period.

thumb.gif


















 
#5 ·
I'll sub to this also!

Love these cases, and especially that Parvum are UK based. Hopefully you have an ATX case out for when I do my next build, I'll definitely indulge in one.
 
#8 ·
Hi! My case is about to be shipped or maybe even already shipped but I have a teaser pic provided my the guys at Parvum and I just started my build log

So here's my official entry
biggrin.gif


Build log : Xenomorph

 
#9 ·
Quote:
Originally Posted by imersa View Post

If a mod could please make this '[Official]' that would be great. Was just going to type it in the name but I was told to PM a mod to do so
smile.gif
I think to make it official you need a members list and have 10 sign-ups. Other member clubs use google docs to make the sign-up list submission form and members list. I'm not sure exactly how that works, though sorry.

As for my own membership: I'm working on too many cases of my own, but I was curious about Parvum cases. So I recently acquired the purple and black prototype from K.3nny (see K.3nny's Aurora Parvum build log). I had also previously bid on L3P's green and black one.



But actually these aren't really my colours, and I don't like modding in a case that's already been modded. So I might order a 'fresh' case for myself
smile.gif
 
#14 ·
Quote:
Originally Posted by Krulani View Post

Personally, my plan is positive pressure and compressed air cans
tongue.gif
I've never had much of a problem with dust with those 2 and periodically opening up and doing a more thorough cleaning. Any time I do loop maintenance I'll scrub everything down.
Metro Datavac is better than air cans
wink.gif


Also subbed for owners club, I wish I could own one.
wink.gif
 
#16 ·
Quote:
Originally Posted by FrancisJF View Post

Metro Datavac is better than air cans
wink.gif


Also subbed for owners club, I wish I could own one.
wink.gif
Immediately purchased. +1

Thanks
 
#18 ·
Subbed, even though I don't own a Parvum myself. It's really cool to see something new and fresh when it comes to cases, I think most of the new cases just recycle old ideas and designs over and over again without much innovation... If I had to, or had the funds to choose another case to go with my Caselabs S5, it would most likely be a Parvum.

I would love to see some bigger cases from them in the future though.
wink.gif
 
#19 ·
Subbed
biggrin.gif
i am waiting for parvum itx case
wink.gif
 
#22 ·
Quote:
Originally Posted by imersa View Post

Good work bro. I am working on an S2.0 for MSI, I've not posted a project log so I'll get some photos up in here Tuesday.
Waiting patiently!
 
#24 ·
Quote:
Originally Posted by abear182 View Post

I have a Parvum Mini ITX case being built at the moment! Should be with me at some stage next week
biggrin.gif
!
Dont forget to post some pics ^ ^
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top