Overclock.net banner

360 slim rad choice

380 views 8 replies 7 participants last post by  jianlossfei 
#1 ·
just a quick question:

alphacool St 360 or the new black ice gts nemesis 360?

for low rpm fans..lowest as possible!
couple degrees difference won't be a problem, i just need the less noisy one (mostly on normal usage , better if low noise on gaming too).

system spec

4770k with one or two r9290 (i have a couple of them but not sure if ill keep crossfire).

Already have 2x240 rads if needed.
pump is on the swiftech mpc 35x.

thanks for help
 
#2 ·
I know the ST360 works really well with slow speed fans http://www.techpowerup.com/forums/threads/bundymania-user-review-triple-radiator-360-roundup.157540/
Don't know anything about the Nemesis rad, but they say "best in class performance' on their site, so if one is to believe that statement and it actually is true, there will probably be a difference of 1-2*C at the same fan speed.
You'll be fine with either rad.

Edit: I'm using two RX360 v3 (54mm thick) with low speed fans and they are awesome. Fans at 800 rpm, I have yet to see the GPU above 40*C when gaming(GTX780Ghz).
 
  • Rep+
Reactions: DMatthewStewart
#3 ·
thanks for the help m8.
I know rx are awesome but i'm limited with thickness by my case.
i know the alphacool one is very realiable but i was wondering about the new nemesis, i kind of like the new coating (matte).
the price is the same not sure about the performance, if someone have the new nemesis gts before i go with the buy button will, be very appreciate.
 
#5 ·
I agree with GetToTheChopaa. See this Martin's review. I don't know about those Black Ice rads though, so I can't say nothing about them.
 
#7 ·
I'm using 3 XSPC AX 360 with low rpm fans and am quite happy with the performance of the rads.
Got Alphacool ST30 360s as well and also can't complain about their performance. I guess it's mostly about preference and for me the design of the AX rads was the reason I bought them.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top