I have a GPU that got wet while system is running. I did let it dry after taking all the parts apart.
After that, I put it back all together and put it back to the system to see if it is still going to work. At the Bios screen it showed with lines on the entire screen but there are some area that still viewable.
The system still boots to the system however, the display isn't right, it is set to the lowest resolution, and the color is like it is set to lower than 16bit. The system still able to know that there is a GPU installed but It cannot install it.
Well of course to solidify that the GPU is causing it, i installed a separate gpu to check, it booted right displayed everything right and installed the drivers right. It is a Nvidia. BTW, all the gpu I tested is a Nvidia.
Then I got in to thinking will flashing its Bios fix the issue? I haven't tried flashing any GPUs BIOS. I need your expertise on this matter.
After that, I put it back all together and put it back to the system to see if it is still going to work. At the Bios screen it showed with lines on the entire screen but there are some area that still viewable.
The system still boots to the system however, the display isn't right, it is set to the lowest resolution, and the color is like it is set to lower than 16bit. The system still able to know that there is a GPU installed but It cannot install it.
Well of course to solidify that the GPU is causing it, i installed a separate gpu to check, it booted right displayed everything right and installed the drivers right. It is a Nvidia. BTW, all the gpu I tested is a Nvidia.
Then I got in to thinking will flashing its Bios fix the issue? I haven't tried flashing any GPUs BIOS. I need your expertise on this matter.