Originally Posted by HatallaS
Yeah I leaning towards the attachment to the push pull but I would need to order from EK again. So I will see what I can do first.
I need to remove the bay anyways, I won't use it and it looks horrid.
Unless I find a good dual bay screen panel for temps monitoring.
Well tbh with just a 5mm Plexiglas sheet you can do everything by yourself, I mean you don't need basically any tools; just good measurements.
After that make a cardboard mock-up to see if the panel fits, same for the dual bay screen panel and every other thing you will build (since helps a lot visualize), than go buy the sheet with your mock ups and ask to your hardware shop to cut it for you since you don't feel comfortable and tbh for just a 1 time use would be a waste to buy a 60€ dremel. For Sure buy some sand paper to trim the excessive edges, buy a double sided file, buy some velcro to hold things and make them detachable for further maintenance and ofc buy the glue for the Plexiglas if you need to make boxes etc, really it's childish-ly easy. Buy some wrap or paint to finish the job.
really don't be afraid to make things by yourself, in this case you don't really risk to damage something valuable since your just going to put a panel