Overclock.net › Forums › Intel › Intel Motherboards › Asus Rampage V Extreme Owners thread
New Posts  All Forums:Forum Nav:

Asus Rampage V Extreme Owners thread - Page 1011

post #10101 of 10650
Quote:
Originally Posted by mus1mus View Post

Yes. A 3200 C14 TridentZ Quad kit will be a good upgrade. They are guaranteed to work without a lot of tweaking too!

Just had mine today. Look up several posts. Hard not to recommend these kits!

Hello

You really need 1.50V for 3200 CAS13 with those sticks?

Gear mentioned in this thread:

post #10102 of 10650
i see a lot of people using adaptive vcore, and i assume, they have speedstep enabled...

why not disabling speedstep and using manual voltage instead?
     
CPUMotherboardGraphicsGraphics
AMD FX 8150 ASUS Sabertooth 990FX XFX AMD Radeon HD 6970 MSI AMD Radeon HD 6970 
RAMHard DriveHard DriveOptical Drive
G-Skill Ripjaws X @ 2400mhz Corsair Force GT Seagate Barracuda 7200rpm 64mb cache SATA 6.0gbps LG Blue Ray Burner 
CoolingCoolingOSMonitor
Noctua NH-D14 Cooler Master Sickleflow 120mm x8 Windows 8 Pro x64 LG 32LE5300 1080p  
KeyboardPowerCaseMouse
Microsoft Sidewinder X6 Thermaltake Toughpower XT 775W Cooler Master HAF 932 Advanced Microsoft Sidewinder X5 
AudioAudio
Sound Blaster X-Fi Titanium Fatal1ty Pro Logitech z506 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
AMD FX 8150 ASUS Sabertooth 990FX XFX AMD Radeon HD 6970 MSI AMD Radeon HD 6970 
RAMHard DriveHard DriveOptical Drive
G-Skill Ripjaws X @ 2400mhz Corsair Force GT Seagate Barracuda 7200rpm 64mb cache SATA 6.0gbps LG Blue Ray Burner 
CoolingCoolingOSMonitor
Noctua NH-D14 Cooler Master Sickleflow 120mm x8 Windows 8 Pro x64 LG 32LE5300 1080p  
KeyboardPowerCaseMouse
Microsoft Sidewinder X6 Thermaltake Toughpower XT 775W Cooler Master HAF 932 Advanced Microsoft Sidewinder X5 
AudioAudio
Sound Blaster X-Fi Titanium Fatal1ty Pro Logitech z506 
  hide details  
Reply
post #10103 of 10650
Quote:
Originally Posted by shampoo911 View Post

i see a lot of people using adaptive vcore, and i assume, they have speedstep enabled...

why not disabling speedstep and using manual voltage instead?

Manual voltage will lock the voltages at what they are set unless you enable c-states. Lower voltages on idle is better for the CPU then locked at a higher voltage is why you do that and tend to be more stable then Manual with c-states enabled. smile.gif

Edit: You might get better results with lower voltages using Manual however, voltages seen to fluctuate less.
Edited by KedarWolf - 8/19/16 at 10:04am
    
CPUMotherboardGraphicsRAM
Intel Core i7 5960X Asus Sabertooth X99 Gigabyte 1080 Ti Founders Edition Corsair LPX 
Hard DriveHard DriveCoolingOS
1.2TB Intel 750 PCI-E SSD 2TB Western Digital Black EKWB Predator 360 With One Titan X In Loop. Windows 10 Anniversary Edition 
MonitorKeyboardPowerCase
Acer XB280HK 4K Gsync QNIX QX2710 LED 27" WQHD 2560x1440 Corsair AX1500i Thermaltake Core X9 
MouseMouse Pad
MadKatz R.A.T. 8 Zowie 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 5960X Asus Sabertooth X99 Gigabyte 1080 Ti Founders Edition Corsair LPX 
Hard DriveHard DriveCoolingOS
1.2TB Intel 750 PCI-E SSD 2TB Western Digital Black EKWB Predator 360 With One Titan X In Loop. Windows 10 Anniversary Edition 
MonitorKeyboardPowerCase
Acer XB280HK 4K Gsync QNIX QX2710 LED 27" WQHD 2560x1440 Corsair AX1500i Thermaltake Core X9 
MouseMouse Pad
MadKatz R.A.T. 8 Zowie 
  hide details  
Reply
post #10104 of 10650
Quote:
Originally Posted by Praz View Post

Hello

You really need 1.50V for 3200 CAS13 with those sticks?

1.45 passed 2hours stressapptest. Just testing waters. wink.gif

1.5 you saw might be the 2400 kit running at 3200 C16?
Edited by mus1mus - 8/19/16 at 10:09am
post #10105 of 10650
Quote:
Originally Posted by stahlhart View Post

After over 1000 pages, are noobs still allowed to participate here?

I built my RVE rig a little under two years ago, when DDR4 was considerably expensive and the choices were relatively few, so I went with a 2400 kit, set my 100 strap, and let it go at that. At the time the conventional wisdom was that higher RAM speeds were not making much of a difference in performance, from what I recall.

Given that prices have dropped since then, would it be worth it in terms of actual performance/usage (in frame rates, not just benchmark scores) to go higher, say to 3000-3200? Can I do this and still leave the strap at 100? I've got a nice stable 4.5GHz overclock (adaptive, 0.7-1.28V core) that I would prefer not to mess with.

It just feels like I've got fast everything else, but slow RAM, and was looking for some balance.

Quote:
Originally Posted by Artah View Post

I don't see how it could make a huge difference if you don't care about bench marks and just want fps from 2400 C15 to 3000/3200, better off saving it for GPU upgrades for better gaming performance.

^^ This.

Probably best ot just overclock the ram you currently have rather than buy a new kit if game FPS is all that matters.
x99
(22 items)
 
Z370
(8 items)
 
x299
(18 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme 10 2 GTX Titan X Pascal 
RAMHard DriveHard DriveHard Drive
GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) Samsung NVMe 950 Pro M.2 
Optical DriveCoolingCoolingCooling
Plextor 810 2x XSPC RX360 Koolance 380i D5 
CoolingOSOSOS
Aquaero 6 Windows 10 x64  Windows 7 Pro Linux Mint 
MonitorKeyboardPowerCase
Seiki 50" 4K monitor (720P-2160i) 240-30Hz Das Keyboard Model S Pro Corsair AX1200 Case Labs SM8 
MouseAudio
Steelseries Rival Ultimate Ears TF10 
CPUMotherboardGraphicsRAM
8700K ASUS Maximus X Apex GTX 1080 2x8 GB G.Skill 4400c19 
Hard DriveCoolingOSCase
Samsung 960 Pro 360Rad + Chiller Win 10 HWBOT OBT 
CPUCPUMotherboardGraphics
7740X 7980XE ASUS Rampage Vi Apex 2x Nvidia Titan Xp SLi 
RAMHard DriveHard DriveHard Drive
G.Skill 3600c15 2x8GB kits Intel 900p WD Raptor 1T Plextor SSDs Raid 0 
Optical DriveCoolingOSOS
Plextor DVD/BR R/W (very) Custom Water Windows 10 Pro Windows 7 Pro 
MonitorKeyboardPowerCase
ASUS 144Hz Ducky Corsair 1500i Microcool Benchetto 101 
MouseAudio
Steelseries Rival Ultimate ears TF10s (IEMs) 
  hide details  
Reply
x99
(22 items)
 
Z370
(8 items)
 
x299
(18 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme 10 2 GTX Titan X Pascal 
RAMHard DriveHard DriveHard Drive
GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) Samsung NVMe 950 Pro M.2 
Optical DriveCoolingCoolingCooling
Plextor 810 2x XSPC RX360 Koolance 380i D5 
CoolingOSOSOS
Aquaero 6 Windows 10 x64  Windows 7 Pro Linux Mint 
MonitorKeyboardPowerCase
Seiki 50" 4K monitor (720P-2160i) 240-30Hz Das Keyboard Model S Pro Corsair AX1200 Case Labs SM8 
MouseAudio
Steelseries Rival Ultimate Ears TF10 
CPUMotherboardGraphicsRAM
8700K ASUS Maximus X Apex GTX 1080 2x8 GB G.Skill 4400c19 
Hard DriveCoolingOSCase
Samsung 960 Pro 360Rad + Chiller Win 10 HWBOT OBT 
CPUCPUMotherboardGraphics
7740X 7980XE ASUS Rampage Vi Apex 2x Nvidia Titan Xp SLi 
RAMHard DriveHard DriveHard Drive
G.Skill 3600c15 2x8GB kits Intel 900p WD Raptor 1T Plextor SSDs Raid 0 
Optical DriveCoolingOSOS
Plextor DVD/BR R/W (very) Custom Water Windows 10 Pro Windows 7 Pro 
MonitorKeyboardPowerCase
ASUS 144Hz Ducky Corsair 1500i Microcool Benchetto 101 
MouseAudio
Steelseries Rival Ultimate ears TF10s (IEMs) 
  hide details  
Reply
post #10106 of 10650
Quote:
Originally Posted by KedarWolf View Post

Manual voltage will lock the voltages at what they are set unless you enable c-states. Lower voltages on idle is better for the CPU then locked at a higher voltage is why you do that and tend to be more stable then Manual with c-states enabled. smile.gif

Edit: You might get better results with lower voltages using Manual however, voltages seen to fluctuate less.

i have 4.4ghz 1.271v RIGHT now on vcore without speedstep, without c-states and with LLC on auto.. and it ramps up to 1.28v whenever in load

IMHO, i think it is an acceptable environment... could be better, but i have it stable..
     
CPUMotherboardGraphicsGraphics
AMD FX 8150 ASUS Sabertooth 990FX XFX AMD Radeon HD 6970 MSI AMD Radeon HD 6970 
RAMHard DriveHard DriveOptical Drive
G-Skill Ripjaws X @ 2400mhz Corsair Force GT Seagate Barracuda 7200rpm 64mb cache SATA 6.0gbps LG Blue Ray Burner 
CoolingCoolingOSMonitor
Noctua NH-D14 Cooler Master Sickleflow 120mm x8 Windows 8 Pro x64 LG 32LE5300 1080p  
KeyboardPowerCaseMouse
Microsoft Sidewinder X6 Thermaltake Toughpower XT 775W Cooler Master HAF 932 Advanced Microsoft Sidewinder X5 
AudioAudio
Sound Blaster X-Fi Titanium Fatal1ty Pro Logitech z506 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
AMD FX 8150 ASUS Sabertooth 990FX XFX AMD Radeon HD 6970 MSI AMD Radeon HD 6970 
RAMHard DriveHard DriveOptical Drive
G-Skill Ripjaws X @ 2400mhz Corsair Force GT Seagate Barracuda 7200rpm 64mb cache SATA 6.0gbps LG Blue Ray Burner 
CoolingCoolingOSMonitor
Noctua NH-D14 Cooler Master Sickleflow 120mm x8 Windows 8 Pro x64 LG 32LE5300 1080p  
KeyboardPowerCaseMouse
Microsoft Sidewinder X6 Thermaltake Toughpower XT 775W Cooler Master HAF 932 Advanced Microsoft Sidewinder X5 
AudioAudio
Sound Blaster X-Fi Titanium Fatal1ty Pro Logitech z506 
  hide details  
Reply
post #10107 of 10650
Quote:
Originally Posted by shampoo911 View Post

i have 4.4ghz 1.271v RIGHT now on vcore without speedstep, without c-states and with LLC on auto.. and it ramps up to 1.28v whenever in load

IMHO, i think it is an acceptable environment... could be better, but i have it stable..

then why worry about adaptive?
x99
(22 items)
 
Z370
(8 items)
 
x299
(18 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme 10 2 GTX Titan X Pascal 
RAMHard DriveHard DriveHard Drive
GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) Samsung NVMe 950 Pro M.2 
Optical DriveCoolingCoolingCooling
Plextor 810 2x XSPC RX360 Koolance 380i D5 
CoolingOSOSOS
Aquaero 6 Windows 10 x64  Windows 7 Pro Linux Mint 
MonitorKeyboardPowerCase
Seiki 50" 4K monitor (720P-2160i) 240-30Hz Das Keyboard Model S Pro Corsair AX1200 Case Labs SM8 
MouseAudio
Steelseries Rival Ultimate Ears TF10 
CPUMotherboardGraphicsRAM
8700K ASUS Maximus X Apex GTX 1080 2x8 GB G.Skill 4400c19 
Hard DriveCoolingOSCase
Samsung 960 Pro 360Rad + Chiller Win 10 HWBOT OBT 
CPUCPUMotherboardGraphics
7740X 7980XE ASUS Rampage Vi Apex 2x Nvidia Titan Xp SLi 
RAMHard DriveHard DriveHard Drive
G.Skill 3600c15 2x8GB kits Intel 900p WD Raptor 1T Plextor SSDs Raid 0 
Optical DriveCoolingOSOS
Plextor DVD/BR R/W (very) Custom Water Windows 10 Pro Windows 7 Pro 
MonitorKeyboardPowerCase
ASUS 144Hz Ducky Corsair 1500i Microcool Benchetto 101 
MouseAudio
Steelseries Rival Ultimate ears TF10s (IEMs) 
  hide details  
Reply
x99
(22 items)
 
Z370
(8 items)
 
x299
(18 items)
 
CPUCPUMotherboardGraphics
i7 5960X i7 6950X Asus Rampage V Extreme 10 2 GTX Titan X Pascal 
RAMHard DriveHard DriveHard Drive
GSkill 3200c14 TZs 8x8GB @ 3400c13 Intel 750 NVMe 400GB 2x Plextor SSD 256 Raid 0 (Win 7) Samsung NVMe 950 Pro M.2 
Optical DriveCoolingCoolingCooling
Plextor 810 2x XSPC RX360 Koolance 380i D5 
CoolingOSOSOS
Aquaero 6 Windows 10 x64  Windows 7 Pro Linux Mint 
MonitorKeyboardPowerCase
Seiki 50" 4K monitor (720P-2160i) 240-30Hz Das Keyboard Model S Pro Corsair AX1200 Case Labs SM8 
MouseAudio
Steelseries Rival Ultimate Ears TF10 
CPUMotherboardGraphicsRAM
8700K ASUS Maximus X Apex GTX 1080 2x8 GB G.Skill 4400c19 
Hard DriveCoolingOSCase
Samsung 960 Pro 360Rad + Chiller Win 10 HWBOT OBT 
CPUCPUMotherboardGraphics
7740X 7980XE ASUS Rampage Vi Apex 2x Nvidia Titan Xp SLi 
RAMHard DriveHard DriveHard Drive
G.Skill 3600c15 2x8GB kits Intel 900p WD Raptor 1T Plextor SSDs Raid 0 
Optical DriveCoolingOSOS
Plextor DVD/BR R/W (very) Custom Water Windows 10 Pro Windows 7 Pro 
MonitorKeyboardPowerCase
ASUS 144Hz Ducky Corsair 1500i Microcool Benchetto 101 
MouseAudio
Steelseries Rival Ultimate ears TF10s (IEMs) 
  hide details  
Reply
post #10108 of 10650
Quote:
Originally Posted by Jpmboy View Post

then why worry about adaptive?

dunno, trending maybe??

nah, it's just i want to make the system as cool as possible, squeezing every inch of power, while having the cpu really cool

but, having speedstep doesn't sacrifice like a couple of cores while on turbo?
     
CPUMotherboardGraphicsGraphics
AMD FX 8150 ASUS Sabertooth 990FX XFX AMD Radeon HD 6970 MSI AMD Radeon HD 6970 
RAMHard DriveHard DriveOptical Drive
G-Skill Ripjaws X @ 2400mhz Corsair Force GT Seagate Barracuda 7200rpm 64mb cache SATA 6.0gbps LG Blue Ray Burner 
CoolingCoolingOSMonitor
Noctua NH-D14 Cooler Master Sickleflow 120mm x8 Windows 8 Pro x64 LG 32LE5300 1080p  
KeyboardPowerCaseMouse
Microsoft Sidewinder X6 Thermaltake Toughpower XT 775W Cooler Master HAF 932 Advanced Microsoft Sidewinder X5 
AudioAudio
Sound Blaster X-Fi Titanium Fatal1ty Pro Logitech z506 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
AMD FX 8150 ASUS Sabertooth 990FX XFX AMD Radeon HD 6970 MSI AMD Radeon HD 6970 
RAMHard DriveHard DriveOptical Drive
G-Skill Ripjaws X @ 2400mhz Corsair Force GT Seagate Barracuda 7200rpm 64mb cache SATA 6.0gbps LG Blue Ray Burner 
CoolingCoolingOSMonitor
Noctua NH-D14 Cooler Master Sickleflow 120mm x8 Windows 8 Pro x64 LG 32LE5300 1080p  
KeyboardPowerCaseMouse
Microsoft Sidewinder X6 Thermaltake Toughpower XT 775W Cooler Master HAF 932 Advanced Microsoft Sidewinder X5 
AudioAudio
Sound Blaster X-Fi Titanium Fatal1ty Pro Logitech z506 
  hide details  
Reply
post #10109 of 10650
Can anyone help me please?

I was on UEFI 1902 without any problems. Today i decided to flash the new 3301. I have no chance to get in the UEFI with my old rock stable settings (custom prime stable) on the new bios.

I'm running:
5820k @4500
Corsair Dominator 4x4 2666@3000

45x100 with 4000 cache in adaptive mode.

I tried the 125 strap, even that did not work. With the RAM running at stock 2666 it seems to work fine, but i dont want to downgrade. So i am back on 1902 and my old settings, running fine.

Do you have any ideas why the new UEFI is so bad?

EDIT:
My old settings:

160207183909fjj4l.png 1602071839266yjdy.png 160207183950myjq8.png 160207184027sxjcp.png 160207184033j8k5v.png
Edited by TurricanM3 - 8/19/16 at 11:44am
post #10110 of 10650
I don't think that you're going to get adaptive mode working correctly with a 125 strap.

For what it's worth, 3301 is working fine here -- though I'm only at 2400 15-15-15-35, as was posted earlier.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards

Gear mentioned in this thread:

Overclock.net › Forums › Intel › Intel Motherboards › Asus Rampage V Extreme Owners thread