Overclock.net › Forums › Intel › Intel Motherboards › ASUS X99 Motherboard Series - Official Support Thread (North American users only)
New Posts  All Forums:Forum Nav:

ASUS X99 Motherboard Series - Official Support Thread (North American users only) - Page 1293

post #12921 of 15866
Quote:
Originally Posted by Kbird View Post

You are not alone my 5820K from RMA is doing the same thing on the New X99A II I got to replace a defective /3.1 version. The CPU is also failing the IPDT tool with an IMC Error , I am thinking it is a bios issue but Intel has just replied that they will send another CPU just in case.

I get the same issue with IMC and PCH, untick those and test the others, they should work.

My VGA light stays on for about 6-7 seconds too on the X99 Deluxe, however I have overclocked my RAM.
Edited by Desolutional - 7/22/16 at 2:55pm
post #12922 of 15866
Quote:
Originally Posted by Desolutional View Post

Quote:
Originally Posted by Kbird View Post

You are not alone my 5820K from RMA is doing the same thing on the New X99A II I got to replace a defective /3.1 version. The CPU is also failing the IPDT tool with an IMC Error , I am thinking it is a bios issue but Intel has just replied that they will send another CPU just in case.

I get the same issue with IMC and PCH, untick those and test the others, they should work.

My VGA light stays on for about 6-7 seconds too on the X99 Deluxe, however I have overclocked my RAM.


I did try that and it passes ..usually... getting the Odd CPU Freq. error too , Intel just phoned about my cross shipment of a new CPU , should be here Monday or Tues. so I guess I will see if it is the bios/board or CPU then.


PS my 1st 5820K did not show these errors , neither has liked the 100 strap above about 3600mhz either , but no trouble on the 125 strap at 4375.
Edited by Kbird - 7/23/16 at 1:25pm
KB2
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99-A II Gigabyte G1 - GTX 970 Corsair Vengenance 32GB @3000mhz 
Hard DriveHard DriveOptical DriveCooling
Samsng 850 EVO 250GB WD Black 640GB x3 in Raid 0 Array DVD RW Corsair H80iGT Water Cooler 
CoolingOSMonitorKeyboard
(3) x 200mm Case Fans Win10 (2) Benq BL3200 32" + (2) NEC 23" M$ Natural 
PowerCaseMouseMouse Pad
Corsair TX HAF 922 Logitech RB-22 Trackball Mionix SARGAS Desktop 
Audio
Onboard 
  hide details  
Reply
KB2
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99-A II Gigabyte G1 - GTX 970 Corsair Vengenance 32GB @3000mhz 
Hard DriveHard DriveOptical DriveCooling
Samsng 850 EVO 250GB WD Black 640GB x3 in Raid 0 Array DVD RW Corsair H80iGT Water Cooler 
CoolingOSMonitorKeyboard
(3) x 200mm Case Fans Win10 (2) Benq BL3200 32" + (2) NEC 23" M$ Natural 
PowerCaseMouseMouse Pad
Corsair TX HAF 922 Logitech RB-22 Trackball Mionix SARGAS Desktop 
Audio
Onboard 
  hide details  
Reply
post #12923 of 15866
Quote:
Originally Posted by Tych-0 View Post

Hello,

I'm having some trouble with my Rampage V Extreme I received as an RMA. The old board I am returning due to one of the bios' not functioning.

Everything with the replacement seems fine so far except I am having trouble with the sound. Upon booting into Windows I'm getting some constant low volume static, and every time I click on something or anytime the computer is displaying something new on screen I'm also getting a popping sound. In addition to that I am not able to get any sounds in windows to play. This is happening for both the speakers and the headphones. The only time I am able to hear anything at all from them is when I do the audio check for 5.1 sound and the rear right speaker plays the test tune albeit it sounds a bit muffled, when it tests the other speakers I just hear a popping/clicking sound.


I've tried uninstalling and reinstalling the newest realtek drives from ASUS's website and it's no help.

I'm not sure if this is related or not, but when I received the new motherboard it all looked basically brand new except for the Supreme FX chip; it's chrome was all smudged from what I assumed was somebody's fingers. I thought that was odd, but wiped with a cloth and it looked perfectly fine after.

Any ideas for me to try and remedy this? Did I get a bad replacement board? I sure hope not.


just saw on ROG Forums a couple of hours ago that you are not the only one

http://rog.asus.com/forum/showthread.php?86170-Problem-with-SupremeFX-Hi-Fi-DAC-with-R5E10

maybe that was you ?
KB2
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99-A II Gigabyte G1 - GTX 970 Corsair Vengenance 32GB @3000mhz 
Hard DriveHard DriveOptical DriveCooling
Samsng 850 EVO 250GB WD Black 640GB x3 in Raid 0 Array DVD RW Corsair H80iGT Water Cooler 
CoolingOSMonitorKeyboard
(3) x 200mm Case Fans Win10 (2) Benq BL3200 32" + (2) NEC 23" M$ Natural 
PowerCaseMouseMouse Pad
Corsair TX HAF 922 Logitech RB-22 Trackball Mionix SARGAS Desktop 
Audio
Onboard 
  hide details  
Reply
KB2
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99-A II Gigabyte G1 - GTX 970 Corsair Vengenance 32GB @3000mhz 
Hard DriveHard DriveOptical DriveCooling
Samsng 850 EVO 250GB WD Black 640GB x3 in Raid 0 Array DVD RW Corsair H80iGT Water Cooler 
CoolingOSMonitorKeyboard
(3) x 200mm Case Fans Win10 (2) Benq BL3200 32" + (2) NEC 23" M$ Natural 
PowerCaseMouseMouse Pad
Corsair TX HAF 922 Logitech RB-22 Trackball Mionix SARGAS Desktop 
Audio
Onboard 
  hide details  
Reply
post #12924 of 15866
Quote:
Originally Posted by Kbird View Post

PS my 1st 5820K did not show these errors , neither has like the 100 strap above about 3600mhz either , but no trouble on the 125 strap at 4375.

Have you tested on an older version of the BIOS? I suspect it may be a BIOS issue.
post #12925 of 15866
im assuming this is probably a very common issue but in hopes of getting some direct insight, id like to ask again.


Ive got a 40 lane CPU, and im running 2x way SLI currently, in addition to an M.2 SSD inside the Hyperx PCIe card included with my X99 deluxe. Im also running the included USB 3.1 card.

Ever since installing the SSD, the first GPU is only running at x8, no matter what. I cant seem to change this. Really frustrating, because this is the entire reason I bought a 5930k instead of a 5820k. I should be able to run both cards at x16, the M.2 SSD at x4, the USB 3.1 card at x2 and still have 2 more lanes to spare!!

anyone shed some light on this please?? much appreciated!
post #12926 of 15866
Can I pipe in here...lol

I installed the new version of the Aura Lighting App (1.03.24.T1005) and it complete stuffed the system, x265 benchmark would time out finding hardware, 20 second free after windows started, not to mention my Cinebench scores went 150 points down.
Uninstalled, system is fine again.
7820x TUF
(8 items)
 
  
CPUMotherboardGraphicsRAM
7820x Asus x299 TUF Mark 1 Asus GTX1080ti Strix Corsair Vengeance LPX CMK32GX4M4B3200C16 32GB (... 
CoolingOSMonitorPower
Corsair H1150i Windows 10 Acer Predator XB271HU Corsair HX850i 
  hide details  
Reply
7820x TUF
(8 items)
 
  
CPUMotherboardGraphicsRAM
7820x Asus x299 TUF Mark 1 Asus GTX1080ti Strix Corsair Vengeance LPX CMK32GX4M4B3200C16 32GB (... 
CoolingOSMonitorPower
Corsair H1150i Windows 10 Acer Predator XB271HU Corsair HX850i 
  hide details  
Reply
post #12927 of 15866
Quote:
Originally Posted by vibraslap View Post

I discovered on my x-99 deluxe II last night that by disabling all boot options except my actual boot device, I reduced my post time by at least 10 seconds(it was pretty absurd before). I would try that and see if it helps.

I've done that, same thing. Will post in average 10 seconds, windows will boot in less than 5. It's probably a common problem for Asus X99 mobos with that slow post (see feedback on newegg/amazon from customers). It really doesn't matter if it's X99A, X99A/usb 3-1, X99A-II, X99-deluxe or so rolleyes.gif
post #12928 of 15866
Quote:
Originally Posted by Desolutional View Post

Quote:
Originally Posted by Kbird View Post

PS my 1st 5820K did not show these errors , neither has like the 100 strap above about 3600mhz either , but no trouble on the 125 strap at 4375.

Have you tested on an older version of the BIOS? I suspect it may be a BIOS issue.


I did actually,,,,, on the X99A-II 401 and 601
and on the X99A/3.1 1201 - 3101

I figured it was just my particular chip or the Chip and Ram Combo.... but I am no expert on the X99 platform
KB2
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99-A II Gigabyte G1 - GTX 970 Corsair Vengenance 32GB @3000mhz 
Hard DriveHard DriveOptical DriveCooling
Samsng 850 EVO 250GB WD Black 640GB x3 in Raid 0 Array DVD RW Corsair H80iGT Water Cooler 
CoolingOSMonitorKeyboard
(3) x 200mm Case Fans Win10 (2) Benq BL3200 32" + (2) NEC 23" M$ Natural 
PowerCaseMouseMouse Pad
Corsair TX HAF 922 Logitech RB-22 Trackball Mionix SARGAS Desktop 
Audio
Onboard 
  hide details  
Reply
KB2
(17 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99-A II Gigabyte G1 - GTX 970 Corsair Vengenance 32GB @3000mhz 
Hard DriveHard DriveOptical DriveCooling
Samsng 850 EVO 250GB WD Black 640GB x3 in Raid 0 Array DVD RW Corsair H80iGT Water Cooler 
CoolingOSMonitorKeyboard
(3) x 200mm Case Fans Win10 (2) Benq BL3200 32" + (2) NEC 23" M$ Natural 
PowerCaseMouseMouse Pad
Corsair TX HAF 922 Logitech RB-22 Trackball Mionix SARGAS Desktop 
Audio
Onboard 
  hide details  
Reply
post #12929 of 15866
Quote:
Originally Posted by Kbird View Post

I figured it was just my particular chip or the Chip and Ram Combo.... but I am no expert on the X99 platform

Ah, guess that's just how it'll play out then. I prefer longer boot times cause it gives the system a little longer to settle, HDDs, Pumps, Fans. It's only 10 seconds ya' know (but gets really annoying when testing tuning and overclock). thumb.gif
post #12930 of 15866
Quote:
Originally Posted by Nichismo View Post

im assuming this is probably a very common issue but in hopes of getting some direct insight, id like to ask again.


Ive got a 40 lane CPU, and im running 2x way SLI currently, in addition to an M.2 SSD inside the Hyperx PCIe card included with my X99 deluxe. Im also running the included USB 3.1 card.

Ever since installing the SSD, the first GPU is only running at x8, no matter what. I cant seem to change this. Really frustrating, because this is the entire reason I bought a 5930k instead of a 5820k. I should be able to run both cards at x16, the M.2 SSD at x4, the USB 3.1 card at x2 and still have 2 more lanes to spare!!

anyone shed some light on this please?? much appreciated!

It really depends on the mobo what slots share bandwidth. What slots do you currently have everything installed in? Is it the mobo in your sig rig?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › ASUS X99 Motherboard Series - Official Support Thread (North American users only)