Originally Posted by Kbird
Actually I did , but you don't exactly give a lot of Details to help diagnose the issue so both JPM and I are having to GUESS....
If a Secure Erase does not work as suggested , try changing the Sata Cables with the other system..........
And getting pissed at me or anyone else cos you are having a BAD DAY is hardly gonna help your Cause is it?
Ok here is how all those BSOD thing started.
System : 5820k + R5V + SSD 850 evo 250 + PSU xp3 1200 + RX480 ( No drivers )
X99 -> Fresh Licensed Win10 -> OS + XTU + CPUZ -> did xtu bench at different settings.
( Bios 1902 - Core/Cache freq , vCore/Cache volt ->> manal, Memory on XMP )
System was up and running smoothly before i shutdown
Did a cold boot and it showed BSOD IRQL on startup of Win10 , so NO in OS BSOD.
Restarted few times , OS repair diagnostic ran but all giving BSOD in 10-20 secs time frame.
So i did this,
Changed BIOS to defaults, same BSOD .
Clrcmos - BSOD
( After Clrcmos , i got this on screen after restart -- >when raid configuration was built, ensure to set sata configuration to raid.)
Win 10 installation media -- > Tried repair , win10 window came to screen and BSOD.
So i updated BIOS --> 3303 ( Latest one ), System at default settings --> BSOD
Removed the SSD to Z97 system and it worked in no time.
Then did fresh UEFI installation of both Win7/10 on SSD ( GPT ) on Z97 just to see if installation usb drive is working good or not -- > Both installed on Z97.--> So OS was not corrupted.
Transferred the SSD of fresh Win7/10 on X99 from Z97 system , Booted to bios to check and all at defaults -- > Booted into Win7 --> win 7 Logo came and halted for 10-20 secs--> System restart --> Again same thing.-- > Booted into Safe Mode --> BSOD with IRQL
Shutdown - -> Restart , Booted into W10 --> Win10 logo came screen was still , no movement of anything -- > BSOD IRQL.--> Repeated Same Process.
Changed SSD , used GPT HDD for fresh installation of Win10 --> Install screen came up with " 1.recover / 2.setup option " --> Tapped Setup --> W10 Logo --> BSOD--> Repeated loops of same thing.
So changed Sata cable , Same thing.
Changed rams positions, booted with 1/2/3/4 rams...same thing.
Disabled Lan/Audio/Bluetooth in BIOS ---- > BSOD in OS boot up or Installation phase.
So my question is if OS or SSD is bad ( Its not ) , then fresh clean installation should have done on HDD.
Problem is something in BIOS options or BIOS itself.
I cant load OS , Reinstall fresh OS or Use drives with OS from other systems like Z97/170.
Secure erase i will do later but same question arises.....ssd is bad ...hdd is bad....then atleast it should do fresh installation on other drives.
PS : I am not pissed at you or anyone , rather i am grateful that you guys are helping me out.If i was rude then i apologise but please help me boot this system,Edited by Johny Boy - 9/25/16 at 5:13pm