Overclock.net › Forums › Intel › Intel CPUs › == Haswell-E Overclock Leaderboard & Owners Club ==
New Posts  All Forums:Forum Nav:

== Haswell-E Overclock Leaderboard & Owners Club == - Page 1413

post #14121 of 22164
Quote:
Originally Posted by mus1mus View Post

That is just fine. In terms of performance, it's no slouch.

Somewhere along your OC the chip goes into a voltage wall. Beyond that is an uphill climb in Voltage requirement per clock change and a steep downwards efficiency.

I think that's what mine has done at 4.2Ghz, anything over needs are fairly significant voltage increase, I thought 4.3Ghz was fine at 1.2v, OCCT soon proved I was wrong, 1.22v still resulted in a OCCT hang or error.
So I'm fine to stay with 4.2Ghz, only gaming at 1080p@144hz so even stock would be fine for that, just like the increase in encoding times.. biggrin.gif

Got my VCCSA lower by going back to 4.2Ghz from 4.3Ghz though thumb.gif
7820x TUF
(8 items)
 
  
CPUMotherboardGraphicsRAM
7820x Asus x299 TUF Mark 1 Asus GTX1080ti Strix Corsair Vengeance LPX CMK32GX4M4B3200C16 32GB (... 
CoolingOSMonitorPower
Corsair H1150i Windows 10 Acer Predator XB271HU Corsair HX850i 
  hide details  
Reply
7820x TUF
(8 items)
 
  
CPUMotherboardGraphicsRAM
7820x Asus x299 TUF Mark 1 Asus GTX1080ti Strix Corsair Vengeance LPX CMK32GX4M4B3200C16 32GB (... 
CoolingOSMonitorPower
Corsair H1150i Windows 10 Acer Predator XB271HU Corsair HX850i 
  hide details  
Reply
post #14122 of 22164
Quote:
Originally Posted by Streetdragon View Post

Hm.. Could it be, that the overclock gets unstable, because i run a 125 Blck?

I use Realbench for stable testing. With 4,5 GHz Realbench freezes. After that i can move my curser for some secounds over the screen and after that the PC does a reset. Maybe the Ram is not realy stable... but i run the XMP with a bit more voltage. 1,4V. XMP want 1,35 but this is not stable at all

Nope. 3000 is achievable thru 125 strap. You just might need a bit of VCCSA help. thumb.gif And/or RAM tuning.

Faulty sticks can also ruin your OC. I have tested mine individually that proved it. Even went from stick to stick to slot to slot. biggrin.gif times!

I believe people would advise you to stay away from XMP and leaving things on Auto. Esp the voltages.

3000 on 125 strap and manually entering the timings (you should of seen at least the primaries so start at that). Set tuning to manual if on Asus. Not XMP. Someone out here can ellaborate this better.

To test each stick, set XMP and run at stock CPU speeds, if a stick fails, RMA.

Quote:
Originally Posted by schoolofmonkey View Post

I think that's what mine has done at 4.2Ghz, anything over needs are fairly significant voltage increase, I thought 4.3Ghz was fine at 1.2v, OCCT soon proved I was wrong, 1.22v still resulted in a OCCT hang or error.
So I'm fine to stay with 4.2Ghz, only gaming at 1080p@144hz so even stock would be fine for that, just like the increase in encoding times.. biggrin.gif

Got my VCCSA lower by going back to 4.2Ghz from 4.3Ghz though thumb.gif

Yeah. Sometimes, you just have to accept things and force your self to stop gunning for higher clocks. It hurts the chip and will just require for more Voltages.
Edited by mus1mus - 11/5/15 at 5:23am
post #14123 of 22164
Testing at XMP isn't a sure fire way of finding faulty modules. Can be VCCSA related or the modules may have poor guardband testing in which case more DRAM voltage may be required. If the sticks work at JEDEC speeds they're not faulty
post #14124 of 22164
Quote:
Originally Posted by Silent Scone View Post

Testing at XMP isn't a sure fire way of finding faulty modules. Can be VCCSA related or the modules may have poor guardband testing in which case more DRAM voltage may be required. If the sticks work at JEDEC speeds they're not faulty

But doing a single stick on XMP does lessen the effect of VCCSA deficiency considering less load for the IMC right? No?

And manufacturers specified/priced the kit to their pre programmed XMP and not JEDEC. So...
post #14125 of 22164
When you are testing your stick to find if any are faulty, it's always better to run them at jedec spec, for obvious reasons.
CaseLabs Panda
(29 items)
 
Bench table
(18 items)
 
Fractal White
(17 items)
 
CPUMotherboardGraphicsRAM
5960X Rampage V Extreme KFA² GTX 980Ti HOF Watercooled Kingston HyperX HX426C13PB2K4/16 
RAMHard DriveHard DriveCooling
G.Skill TridentZ F4-3200C14Q-32GTZ Kingston v300 Intel SSD 535 EK-Supremacy EVO - Full Nickel 
CoolingCoolingCoolingOS
EK-Coostream XE 360 EK-Vardar F4-120ER EK-XRES 140 D5 Vario (incl. pump) Win10 / Win 8.1 / Win 7 / Linux Mint 
MonitorKeyboardPowerCase
Dell U2515H Ducky Channel Shine III MX black - white LED /... Enermax Platimax 1000w dimastech easy v3 
MouseMouse Pad
logitech G9X HyperX 900x400 / Steelseries QCK 
  hide details  
Reply
CaseLabs Panda
(29 items)
 
Bench table
(18 items)
 
Fractal White
(17 items)
 
CPUMotherboardGraphicsRAM
5960X Rampage V Extreme KFA² GTX 980Ti HOF Watercooled Kingston HyperX HX426C13PB2K4/16 
RAMHard DriveHard DriveCooling
G.Skill TridentZ F4-3200C14Q-32GTZ Kingston v300 Intel SSD 535 EK-Supremacy EVO - Full Nickel 
CoolingCoolingCoolingOS
EK-Coostream XE 360 EK-Vardar F4-120ER EK-XRES 140 D5 Vario (incl. pump) Win10 / Win 8.1 / Win 7 / Linux Mint 
MonitorKeyboardPowerCase
Dell U2515H Ducky Channel Shine III MX black - white LED /... Enermax Platimax 1000w dimastech easy v3 
MouseMouse Pad
logitech G9X HyperX 900x400 / Steelseries QCK 
  hide details  
Reply
post #14126 of 22164
Quote:
Originally Posted by michael-ocn View Post

4.5 at 1.3 isn't all that hungry, is it? Well, I guess its more like 1.35. Hmmm, but wassup with the 1.4v in one screenshot, that's a dicey amount of juice for regular use.

thats what i was thinking. considering other people chips on the leader board. i thought i was good up to 1.4v

yea i saw that too and quickly changed it in the bios. it was a typo, i think but its very stable at 1.35v right now



Quote:
Originally Posted by mus1mus View Post

That is just fine. In terms of performance, it's no slouch.

Somewhere along your OC the chip goes into a voltage wall. Beyond that is an uphill climb in Voltage requirement per clock change and a steep downwards efficiency.

honestly with my tempss, i do feel like i could get to 4.7 -5.0mhz. im nust not very skilled and dont know what all to adjust beside what i already have. im sure a pro like you guys could get it stable way higher. just my opinion
post #14127 of 22164
can you take screen shots in the bios so i can show you guys my settings and you tell me what to adjust
post #14128 of 22164
Quote:
Originally Posted by mus1mus View Post

But doing a single stick on XMP does lessen the effect of VCCSA deficiency considering less load for the IMC right? No?

And manufacturers specified/priced the kit to their pre programmed XMP and not JEDEC. So...


The effects of running only a single channel with the memory overclocked isn't what you're testing for. There is no guarantee that covers users for not being able to run the binned frequency. You want to test for actual fault with the modules.
post #14129 of 22164
Quote:
Originally Posted by Alpina 7 View Post

thats what i was thinking. considering other people chips on the leader board. i thought i was good up to 1.4v

yea i saw that too and quickly changed it in the bios. it was a typo, i think but its very stable at 1.35v right now
honestly with my tempss, i do feel like i could get to 4.7 -5.0mhz. im nust not very skilled and dont know what all to adjust beside what i already have. im sure a pro like you guys could get it stable way higher. just my opinion

I'd be careful about taking what's on an oc leader board as an indication of safe long term stability. Looks like your needing to run a little higher than avg voltage to reach 4.5, you might have a good chance of being able to pull it down some.
Quote:
Originally Posted by Alpina 7 View Post

can you take screen shots in the bios so i can show you guys my settings and you tell me what to adjust

F12 should dump a screenshot to usb drive.
Falcon2010
(18 items)
 
Kickass-X99
(19 items)
 
 
CPUMotherboardGraphicsRAM
i7-875K ASUS P7P55D-E-PRO EVGA GTX 670 FTW Crucial Ballistix Tactical 
Hard DriveHard DriveOptical DriveCooling
Western Digital Caviar Black Crucial M500 SSD  LG Blu-ray Combo Drive Asetek 550LC 
CoolingCoolingOSMonitor
Noiseblocker Multiframe M12-P Silverstone Case Fans Windows 7 Home Premium 64bit Samsung 2443 
KeyboardPowerCaseMouse
Rosewill RK-9000BR Silverstone Strider Plus 750 Silverstone Kublai SteelSeries Sensei [RAW] 
AudioAudio
Sennheiser PX100 headphones AntLion ModMic v4 
CPUMotherboardGraphicsRAM
i7-5820k | core@4.4 1.23v | cache@4.1 1.1v ASUS X99-PRO / USB 3.1 EVGA GTX 980ti FTW Crucial Ballistix Sport 2400 CL12 (4 x 4GB) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial MX200 (1 TB) Crucial M500 (960 GB) Western Digital Green (2 TB) Pioneer BDR-XU03 
CoolingOSOSMonitor
Swiftech H240-X Win 10 Pro (64 bit) Linux Mint 17 Cinnamon Asus ROG Swift PG279Q 
KeyboardPowerCaseMouse
Rosewill RK-9000BR Silverstone Strider Gold 850 Phanteks Enthoo EVOLV ATX (gray) SteelSeries Sensei [RAW] 
Mouse PadAudioOther
Gamedias NYX Mousepad 350x280 Grado SR80e Lexar Professional Workflow SR2 SDHC/SDXC UHS-I... 
  hide details  
Reply
Falcon2010
(18 items)
 
Kickass-X99
(19 items)
 
 
CPUMotherboardGraphicsRAM
i7-875K ASUS P7P55D-E-PRO EVGA GTX 670 FTW Crucial Ballistix Tactical 
Hard DriveHard DriveOptical DriveCooling
Western Digital Caviar Black Crucial M500 SSD  LG Blu-ray Combo Drive Asetek 550LC 
CoolingCoolingOSMonitor
Noiseblocker Multiframe M12-P Silverstone Case Fans Windows 7 Home Premium 64bit Samsung 2443 
KeyboardPowerCaseMouse
Rosewill RK-9000BR Silverstone Strider Plus 750 Silverstone Kublai SteelSeries Sensei [RAW] 
AudioAudio
Sennheiser PX100 headphones AntLion ModMic v4 
CPUMotherboardGraphicsRAM
i7-5820k | core@4.4 1.23v | cache@4.1 1.1v ASUS X99-PRO / USB 3.1 EVGA GTX 980ti FTW Crucial Ballistix Sport 2400 CL12 (4 x 4GB) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial MX200 (1 TB) Crucial M500 (960 GB) Western Digital Green (2 TB) Pioneer BDR-XU03 
CoolingOSOSMonitor
Swiftech H240-X Win 10 Pro (64 bit) Linux Mint 17 Cinnamon Asus ROG Swift PG279Q 
KeyboardPowerCaseMouse
Rosewill RK-9000BR Silverstone Strider Gold 850 Phanteks Enthoo EVOLV ATX (gray) SteelSeries Sensei [RAW] 
Mouse PadAudioOther
Gamedias NYX Mousepad 350x280 Grado SR80e Lexar Professional Workflow SR2 SDHC/SDXC UHS-I... 
  hide details  
Reply
post #14130 of 22164
Quote:
Originally Posted by Alpina 7 View Post

can you take screen shots in the bios so i can show you guys my settings and you tell me what to adjust

Memory stick, and when in bios press F12 to take a screenshot of each bios section, save to mem stick.
CORSAIR WC
(14 items)
 
  
CPUMotherboardGraphicsRAM
HASWELL-E 5960x (3423B529)Costa Rica + 5960X (J...  GIGABYTE X99 SOC Champion/ ASUS RAMPAGE V EXTR... 2X NVIDIA GTX 980 Ti's 16 GIG G-SKILL DDR4 3200/3300/3400 KITS 
Hard DriveOptical DriveCoolingOS
OCZ VERTEX 450 128GB SSD OCZ AGILITY 4 256GB S... LG BD RE-WRITER1 X SAMSUNG 20X KOOLANCE 380I BLOCK 2X XSPC 360 RADS 1X XSPC 12...  WINDOWS 10 X64 BUILD 11099 
MonitorKeyboardPowerCase
2X AOC 28" LED SAITEK ECLIPSE II SUPER FLOWER 1300W GOLD CORSAIR OBSIDIAN 900D 
Mouse
LOGITECH MX1000 LASER 
  hide details  
Reply
CORSAIR WC
(14 items)
 
  
CPUMotherboardGraphicsRAM
HASWELL-E 5960x (3423B529)Costa Rica + 5960X (J...  GIGABYTE X99 SOC Champion/ ASUS RAMPAGE V EXTR... 2X NVIDIA GTX 980 Ti's 16 GIG G-SKILL DDR4 3200/3300/3400 KITS 
Hard DriveOptical DriveCoolingOS
OCZ VERTEX 450 128GB SSD OCZ AGILITY 4 256GB S... LG BD RE-WRITER1 X SAMSUNG 20X KOOLANCE 380I BLOCK 2X XSPC 360 RADS 1X XSPC 12...  WINDOWS 10 X64 BUILD 11099 
MonitorKeyboardPowerCase
2X AOC 28" LED SAITEK ECLIPSE II SUPER FLOWER 1300W GOLD CORSAIR OBSIDIAN 900D 
Mouse
LOGITECH MX1000 LASER 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › == Haswell-E Overclock Leaderboard & Owners Club ==