Overclock.net › Forums › Intel › Intel CPUs › == Haswell-E Overclock Leaderboard & Owners Club ==
New Posts  All Forums:Forum Nav:

== Haswell-E Overclock Leaderboard & Owners Club == - Page 2012

post #20111 of 22233
Quote:
Originally Posted by mus1mus View Post

Lucky you?

1.25 will terribly hot for an AIO IMO. All 7 5930K systems on my watch simply runs at 4.3/4.0 1.2V max. I don't really like seeing 75C stress testing so yeah. And yeah H110GTX fans are big time hummers!

They all do Premier Pro and After Effects with 4K rendering 24/7. thumb.gif

I'm going to be honest, I think 50% of those systems, I specifically binned/cherry picked CPUs from certain batch #'s. the 2W serial number rule worked great 100% of the time for me. 2 of those chips were capable of 4.6+.

The rest were close to launch 5820K cpus.

1.25V runs fine on the new H110iGT based AIO. But yeah, it is a bit above my comfort zone too, that's why I settle around 1.225V for those systems thumb.gif
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
post #20112 of 22233
Quote:
Originally Posted by cookiesowns View Post

Every chip is different. Are you on an AIO water cooler? If so I wouldn't go above 1.25V adaptive. Nor go above 1.92VCCIN.

HWE seems to start getting unstable when package temps go above 75C ish.

You should be able to settle at 4.2Ghz. Trust me, especially if you do rendering you'll appreciate the lower temps and long term stability.

Source: I work at a media production house. We have many systems overclocked running 5820Ks and 5960X's most are on corsair H110i's. My samples vary from 4.2-4,6. All I use <1.25V
No I have an Air cooler that slightly outperforms a Noctua D14, and about the same as cheaper AIOs. Not the best but above average too. My only problem with my cooler is the fan maxes at 1660RPM, I was thinking of modding it with a Noctua 3000RPM industrial fan. But I have other things to buy first.
Liquid cooling scares me. I'm still really nervous about the Fury X's cooling unit.

I'm ok with 4.2ghz, but I want to see if there's a problem first, because the games I play are mostly reliant on single threaded performance, which means every 100mhz can improve frame rates while gaming, and recording.
post #20113 of 22233
@cookiesowns
My Edit.

And yep, no disagreement. thumb.gif

@MissHaswellE

Yep, It is running hot. You might have even injected degradation with the Voltage you are trying. rolleyes.gif

No Air Cooler can tame these chips at 1.3V
Edited by mus1mus - 8/7/16 at 7:02pm
post #20114 of 22233
Quote:
Originally Posted by mus1mus View Post

@cookiesowns
My Edit.

And yep, no disagreement. thumb.gif

@MissHaswellE

Yep, It is running hot. You might have even injected degradation with the Voltage you are trying. rolleyes.gif

No Air Cooler can tame these chips at 1.3V
It was like this the day I got it.
It was blue screening and black screening following guides that were out when I first built the machine, and settings other people had their 5820K's running at.
Not saying I didn't degrade the chip at all, but it was never able to handle 4.3ghz+ at any setting at any point of it's lifetime. Which is why I'm thinking it's just a bad chip.
If other people are running air coolers at 4.2ghz at 1.2volts, and my chip blue screens on any test at 4.2ghz >1.25volts, pretty sure there's a problem with the motherboard settings or the chip itself.
(throwing eyerolls every reply is also rather rude.)
post #20115 of 22233
Quote:
Originally Posted by mus1mus View Post

@cookiesowns
My Edit.

And yep, no disagreement. thumb.gif

thumb.gif no disagreement here as well. I provided the 1.25V suggestion to Misshaswelll as they were already pushing tons of voltage, so I'm assuming they know the risks and will monitor temps.

I still miss the 5960X 4.6 @ 1.185V. That chip was pretty dang good.
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
post #20116 of 22233
Quote:
Originally Posted by MissHaswellE View Post

It was like this the day I got it.
It was blue screening and black screening following guides that were out when I first built the machine, and settings other people had their 5820K's running at.
Not saying I didn't degrade the chip at all, but it was never able to handle 4.3ghz+ at any setting at any point of it's lifetime. Which is why I'm thinking it's just a bad chip.
If other people are running air coolers at 4.2ghz at 1.2volts, and my chip blue screens on any test at 4.2ghz >1.25volts, pretty sure there's a problem with the motherboard settings or the chip itself.
(throwing eyerolls every reply is also rather rude.)

I would suggest redoing things.

Start with:

Enable Enhanced Turbo. Warning: Spoiler! (Click to show)

SVID OFF
VCore at 1.2
VCCIN at 1.95
SA Voltage Mode to Offset (if available)
And set it to something like 0.050 if you are not yet dealing with Memory OC. Warning: Spoiler! (Click to show)

Intel Adaptive Thermal Control - Disabled
C-State - Disabled
C-State Limit - Disabled
Long Duration Power Limit - MAX Value
Long Duration Maintained - MAX Value
Short Duration Power Limit - MAX Value
CPU Current Limit - MAX Value
Internal VR OVP OCP Protection - Disabled
Internal VR Efficiency Management - High Performance or Highest Value Warning: Spoiler! (Click to show)

Reboot and Try 4.0 Core and leave other things as they are.
Test with HWBOT X265 4K encode X2 Overkill. Pass that, reboot > try 41.

Monitor your temps as always. thumb.gif


And yeah, Eyerolls are just meant to be "wondering" clause. wink.gif
post #20117 of 22233
Quote:
Originally Posted by cookiesowns View Post

thumb.gif no disagreement here as well. I provided the 1.25V suggestion to Misshaswelll as they were already pushing tons of voltage, so I'm assuming they know the risks and will monitor temps.

I still miss the 5960X 4.6 @ 1.185V. That chip was pretty dang good.

If at 4.7GHZ CPU, 4.4 cache at 1.248v/1.18v respectively I'm getting 70-75C RealBenching and around 80C package with Adaptive/Offset voltages I'm fine, right? Snorkle.gif

I mean in gaming etc. it's not going to stress the CPU like RealBench anyways I think. redface.gif

Edit: My CPU input is usually around 1.88v and my VCSSA is around 1.08v. Memory runs around 1.367V smile.gif
    
CPUMotherboardGraphicsRAM
Intel Core i7 5960X Asus Sabertooth X99 Gigabyte 1080 Ti Founders Edition Corsair LPX 
Hard DriveHard DriveCoolingOS
1.2TB Intel 750 PCI-E SSD 2TB Western Digital Black EKWB Predator 360 With One Titan X In Loop. Windows 10 Anniversary Edition 
MonitorKeyboardPowerCase
Acer XB280HK 4K Gsync QNIX QX2710 LED 27" WQHD 2560x1440 Corsair AX1500i Thermaltake Core X9 
MouseMouse Pad
MadKatz R.A.T. 8 Zowie 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 5960X Asus Sabertooth X99 Gigabyte 1080 Ti Founders Edition Corsair LPX 
Hard DriveHard DriveCoolingOS
1.2TB Intel 750 PCI-E SSD 2TB Western Digital Black EKWB Predator 360 With One Titan X In Loop. Windows 10 Anniversary Edition 
MonitorKeyboardPowerCase
Acer XB280HK 4K Gsync QNIX QX2710 LED 27" WQHD 2560x1440 Corsair AX1500i Thermaltake Core X9 
MouseMouse Pad
MadKatz R.A.T. 8 Zowie 
  hide details  
Reply
post #20118 of 22233
Quote:
Originally Posted by KedarWolf View Post

If at 4.7GHZ CPU, 4.4 cache at 1.248v/1.18v respectively I'm getting 70-75C RealBenching and around 80C package with Adaptive/Offset voltages I'm fine, right? Snorkle.gif

I mean in gaming etc. it's not going to stress the CPU like RealBench anyways I think. redface.gif

Edit: My CPU input is usually around 1.88v and my VCSSA is around 1.08v. Memory runs around 1.367V smile.gif

I bet you can lower package temps if lower cache, input, and VCCSA. That chip should have really good everything.

But, as JPM would say, smoke em if you got em.
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
post #20119 of 22233
Quote:
Originally Posted by Jpmboy View Post

Only way to know about the chip is to use it... batch numbers may or may not predict anything except within a wide range of performance. All of the late-production HWE chips seem very good tho. thumb.gif

You're telling me..... lol.

Buying my 5930k on day 1 wasn't the best idea. Definitely getting a new one soon.

4.3ghz is unacceptable. smile.gif
Quote:
Originally Posted by cookiesowns View Post

thumb.gif no disagreement here as well. I provided the 1.25V suggestion to Misshaswelll as they were already pushing tons of voltage, so I'm assuming they know the risks and will monitor temps.

I still miss the 5960X 4.6 @ 1.185V. That chip was pretty dang good
.

The modesty king ^^.
post #20120 of 22233
I want to kill my CPU, and then RMA it. tongue.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › == Haswell-E Overclock Leaderboard & Owners Club ==