Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Case Mod]••Reaper N1's (Dark Side)••Custom-3D printed parts
New Posts  All Forums:Forum Nav:

[Case Mod]••Reaper N1's (Dark Side)••Custom-3D printed parts - Page 24

post #231 of 1191
This is getting really interesting. Keep the good work!
post #232 of 1191
Thread Starter 
Thanks buddy, I thought you had the win for sure on MOTM. I didn't get to see the results until after the polls closed. I had a pipe break in the shop and came home to a ton of water. So I've been working on fixing the shop back up and seeing how much of my parts are completely ruined. Luckily my Dark Side case was on the bench. I've been working on the case during breaks from fixing everything in the shop.
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
post #233 of 1191
Thread Starter 
I'm planning to work on the case late in the night. I'm going to pass on a full night of sleep so that I can catch up on some modding as well as updates. Stand by for lots of updates.
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
post #234 of 1191
woo! wheee.gif
"The Fridge"
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4770k (lapped and delidded) ASUS Maximus VII Hero Geforce GTX Titan X Corsair Vengeance 16GB  
Hard DriveOptical DriveCoolingOS
Samsung EVO 256GB SSD None Corsair H100i Windows 7 
MonitorKeyboardPowerCase
ASUS VS239 Corsair RGB K70 Corsair AX860 NZXT H440 
MouseMouse PadAudio
Corsair M65  Custom 2mm Teflon Onboard SupremeFX 
  hide details  
Reply
"The Fridge"
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4770k (lapped and delidded) ASUS Maximus VII Hero Geforce GTX Titan X Corsair Vengeance 16GB  
Hard DriveOptical DriveCoolingOS
Samsung EVO 256GB SSD None Corsair H100i Windows 7 
MonitorKeyboardPowerCase
ASUS VS239 Corsair RGB K70 Corsair AX860 NZXT H440 
MouseMouse PadAudio
Corsair M65  Custom 2mm Teflon Onboard SupremeFX 
  hide details  
Reply
post #235 of 1191
I want a 3d printer so bad. Finding one under 300 though is impossible. Nice work though looks amazing.
Upgrayedd
(8 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1700 @ 3.95GHz 1.387v Asus Prime B350 Plus  RX480 XFX RS 1350/2200 Corsair Vengeance LPX 16GB 2933Mhz cas 14 
Hard DriveOSMonitorPower
Samsung 950 Pro M.2 Windows 10 pro x64 Viotek curved FHD 144Hz EVGA 750w 80 Bronze 
  hide details  
Reply
Upgrayedd
(8 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1700 @ 3.95GHz 1.387v Asus Prime B350 Plus  RX480 XFX RS 1350/2200 Corsair Vengeance LPX 16GB 2933Mhz cas 14 
Hard DriveOSMonitorPower
Samsung 950 Pro M.2 Windows 10 pro x64 Viotek curved FHD 144Hz EVGA 750w 80 Bronze 
  hide details  
Reply
post #236 of 1191
Thread Starter 
Thanks guys!
Quote:
Originally Posted by Dimaggio1103 View Post

I want a 3d printer so bad. Finding one under 300 though is impossible. Nice work though looks amazing.

I built my first 3D printer out of scrap parts for under $100. I wouldn't recommend doing it that way as it took me almost a year. That was a long time ago, way before it became a well known device. It takes a lot of work to operate and maintain. A lot of people think it's an appliance but, it is far from it. It's a tool like a lathe or CNC machine. It is well worth the effort of keeping it operational.

I've had about 10 or so 3D printers but, now I just have my dual extruder (Beast of a printer), a smaller single extruder and one that is top of the line (Custom built and designed by me). It's about 90% complete but, I've put it on the back burner for the last month or so. I got bit by the case modding bug a little over a month ago and took a break from other builds.

I could build a printer for about $300-400 but it would take a while to source parts. There are printers you can buy in this price range but a lot of them are junk. The Printrbot Simple Makers Ed. Is around that price and it's a great starter printer. I highly recommend buying a kit and set aside a lot of time to dedicate to it. Either that or wait a year or two as the technology is progressing exponentially.

Sorry for the rant.
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
post #237 of 1191
Thread Starter 
I started to cutout the acrylic piece that helps to support the frame. I will be designing a boot that will slip over this cutout. I will 3D print the boot using FilaFlex Plastic filament because it is very flexible stuff. It works great for this. I also came up with the idea of printing my custom designed Mobo Tough Cover using temperature sensitive filament. It changes colors depending on the temp. I will be using this filament for a few other parts as it's a great way to visually see temps. That way I can visually see where cool and hotspots are on the motherboard.

Here's the acrylic cutouts for the specialty hinges:


Updated shot without the painters tape:

Edited by ReaperN1 - 10/20/14 at 6:00am
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
post #238 of 1191
Thread Starter 
I was able to make quite a bit of progress tonight. I started things off by filing down the acrylic panels as well as smoothing out any potential gouges or scratches. I also took my time to design and print a switch panel. This panel has a combination of momentary and full on and off switches. I ordered a small optical drive bay panel that I will use to mount the final switch panel. I need to incorporate the touch panel on and off switch that I bought. The touch sensitive switch is pretty neat all you have to do is glide your finger across it. It was originally designed for auto use and is brand new to the market. It is an all black flat switch (Pictured on page 1). I like it because it's rather sneaky and looks nothing like a switch. I will mount it along side the other two switches on the front panel. I am debating on mounting the indicator lights behind the grill so that they are only noticeable when active. I bought a handful of different color indicator lights but, I think I will use the blue ones as they fit in with the theme best.

Time for better photos
I decided it was time that I step up the quality of my photos and build a proper light box with an infinity background. It actually worked quite well as you can see with the pics that have a white background. I will use this space to take photos of smaller parts and pieces. Now I just need to make one big enough to fit a full case in.

Here's a test panel I printed to get an idea of how it would look. I won't be using this for this build:


Sanding away with a hand file, sandpaper and then a 3-part polishing system for the edges:


This is the switch mount panel that I will modify to accommodate my intended setup:


I've been playing around with different setups for lighting and ambient diffused cathodes. Unfortunately a few of my cathodes got ruined when the shop partially flooded:



I plan to have quite a few good updates tomorrow. I might reveal a few neat mods I've been working on then as well.
Edited by ReaperN1 - 10/20/14 at 6:27am
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
post #239 of 1191
Thread Starter 
Prepping the 3mm acrylic to cutout for panel switch mount. I also tested out the switch mount that I 3D printed, just to see how it looked. It would look pretty sharp once it's painted. I also decided to add a sneak peak of a mod that I'm working on for this build. It will work great once I get the mounts done in nylon. It will be interesting to see what kind of temp differences are made.

Work on switch mounts:



Sneak peak: I bet some of you can place that heat sink (slightly modified)
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
IKONiK
(9 items)
 
APEX CES Build
(22 items)
 
 
CPUMotherboardGraphicsRAM
I7 6700k 1151 EVGA Z170 Classified K 1151 EVGA GTX 980TI Classified  EVGA Superclocked DDR4 
Hard DriveHard DriveCoolingOS
OCZ Vector 180 OCZ RD400 NVM PCIE SSD  Alphacool custom loop with limited edition whit... Windows 10 
Power
Be Quiet Dark Power Pro 11 1,000 watt 
CPUCPUMotherboardMotherboard
i7 7700k 1151 Kaby Lake  i7 7700k 1151 Kaby Lake  Aorus Z270X-Gaming 5 Aorus Z270X-Gaming 5 
GraphicsGraphicsGraphicsGraphics
Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 Gigabyte GTX1070 G1 
RAMRAMHard DriveHard Drive
Hyperx 16gb RGB Predator Prototype  Hyperx 16gb RGB Predator Prototype  Hyperx Fury SSD Hyperx Fury SSD 
CoolingCoolingOSOS
Alphacool custom loop with 420mm and 360mm radi... Alphacool custom loop with 420mm and 360mm radi... Windows 10 Windows 10 
PowerPowerCaseCase
Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark Power Pro 11 1,000 watt  Be Quiet Dark BASE Pro orange edition  Be Quiet Dark BASE Pro orange edition  
MouseMouse
Steelseries RIVAL500 Steelseries RIVAL500 
  hide details  
Reply
post #240 of 1191
^nice xbox360 heatsink lol
MahPC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600 (non k) P8h67-M Pro XFX R9 290 EDBD Kingston 
Hard DriveCoolingOSMonitor
Seagate 7200.11 Coolermaster 412S Windows 8.1 Dell Monicrap 
KeyboardPowerCaseMouse
Dell mechanical keyboard Corsair 850RM unknown Logitech M90 
Audio
Realtek HD integrated audio 
  hide details  
Reply
MahPC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600 (non k) P8h67-M Pro XFX R9 290 EDBD Kingston 
Hard DriveCoolingOSMonitor
Seagate 7200.11 Coolermaster 412S Windows 8.1 Dell Monicrap 
KeyboardPowerCaseMouse
Dell mechanical keyboard Corsair 850RM unknown Logitech M90 
Audio
Realtek HD integrated audio 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Case Mod]••Reaper N1's (Dark Side)••Custom-3D printed parts