Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA GTX 980 Owner's Club
New Posts  All Forums:Forum Nav:

[Official] NVIDIA GTX 980 Owner's Club - Page 932

post #9311 of 10534
Quote:
Originally Posted by Madmaxneo View Post

Am I understanding correctly that as I increase the voltage I should see increase in my GPU base clock? I did a test at + 25mv but didn't see an increase in core clock. I am running the test now at +43mV. So far no artifacts. I am running the Furmark test in Precision X. Do you recommend a better base GPU test?

Increasing voltage won't increase your base clock. It will give you a higher overall boost clock.
post #9312 of 10534
Quote:
Originally Posted by Zuhl3156 View Post

Many prefer one of the benchmarks from Unigine since they're free. Try 'Valley' or 'Heaven'. Both work equally well. I don't use them because they don't work well with SLI enabled. My minimum FPS always drops too low in SLI mode.

I knew about those.. I was just testing you, yeah that's it....lol.
I am downloading both of those now and it is taking forever. The servers on their end (or somewhere between) are really slow...

I was having difficulty running some games with the settings I had so I reset to default and changed my overvoltage to +50. So far so good.

I had my power target and GPU clock offset both set to +114 (% and mhz respectively).
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
post #9313 of 10534
Quote:
Originally Posted by Zuhl3156 View Post

Increasing voltage won't increase your base clock. It will give you a higher overall boost clock.

That makes sense. I am thinking it is safer to leave the base clock and just work with the boost clock.


Unless there is a way to increase the base clock, reasonably.......
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
post #9314 of 10534
I got an additional 26 MHz from my boards just by boosting the voltage. I didn't touch anything else. Power Target or Limit is always at its max.
post #9315 of 10534
I ran valley on ultra and got a score of 5560. My GPU core got up to 1531 as I had my OV set to +87mV (max)...

Not sure if that is good or not but what else can I do to increase performance?
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
post #9316 of 10534
Hi

New to the site. Just got my EVGA GTX 980 SC ACX 2.0 recently.
This weekend i updated the BIOS to a custom one, by Mr. Dark.
1506 Mhz base clock / 4001 MHz, no boost, higher TDP, 1,275 volt. It seems stable. But when i run a burn-in test in Furmark 2560x1440 with 4xAA the graphics driver crashes after some minutes.
Didn't see any problem in other benchmark tests or games yesterday.
Should i be worried about the furmark situation, og just be happy as long as i dont get crashes in games ect.?
post #9317 of 10534
I still don't understand why people think they need a custom bios. MY best GTX 980 can do 1505 on the core with the stock bios.

Welcome to OC. smile.gif
    
CPUMotherboardGraphicsGraphics
Intel i7 2600k ASUS P8Z77WS EVGA GTX 980 SC ACX 2.0 EVGA GTX 980 ACX 2.0 
GraphicsRAMPower
EVGA GTX 970 SC ACX 2.0 Mushkin Enhanced Blackline 8GB (2 x 4GB) 240-Pi... FirePower ZX Series 1250W 80Plus Gold 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel i7 2600k ASUS P8Z77WS EVGA GTX 980 SC ACX 2.0 EVGA GTX 980 ACX 2.0 
GraphicsRAMPower
EVGA GTX 970 SC ACX 2.0 Mushkin Enhanced Blackline 8GB (2 x 4GB) 240-Pi... FirePower ZX Series 1250W 80Plus Gold 
  hide details  
Reply
post #9318 of 10534
Quote:
Originally Posted by Madmaxneo View Post

I ran valley on ultra and got a score of 5560. My GPU core got up to 1531 as I had my OV set to +87mV (max)...

Not sure if that is good or not but what else can I do to increase performance?

1500 to 1550 MHz on a GTX-980 is considered good. You can start boosting your Core Clock until it crashes and then back it down a little until it's stable but I think you're doing fine as it is.
post #9319 of 10534
Quote:
Originally Posted by Zuhl3156 View Post

1500 to 1550 MHz on a GTX-980 is considered good. You can start boosting your Core Clock until it crashes and then back it down a little until it's stable but I think you're doing fine as it is.

The only sliders I see on Precision X are the Power target, GPU temp target GPU temp target, GPU clock offset, and Mem clock offset. Would it be just the GPU clock off set I adjust or do I need to also slightly adjust the others?
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
The Dark Knight
(25 items)
 
  
CPUMotherboardGraphicsRAM
i7 4930k ASUS Rampage IV Black Ed EVGA GTX 1070 SC ACX 3.0 G.Skill Trident X Series 32GB (4 x 8GB) DDR3-2133 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Pro Western Digital BLACK SERIES 7200RPM San Disk Ultra II Seagate 4TB Gaming SSHD 
Optical DriveCoolingCoolingCooling
LG Blu Ray 16x Multi Disc Swiftech H 240-X Watercool Heatkiller IV Pro Clean Acrylic Swiftech H 140-X 
CoolingOSMonitorMonitor
Watercool Heatkiller IV Pro Nickel/Black 1070 MS Windows 10 Pro Vizio 24" 1080p TV  AOC G2460PG 24" 1ms (GTG) 144 Hz Gaming Monito... 
KeyboardPowerCaseMouse
Corsair K95 RGB EVGA G2 1000w Gold Plus Phantom 820 Black Logitech G502 Proteus Core 
Mouse PadAudioAudioOther
None Logitech z906 5.1 surround speaker system Sound Blaster Zx NZXT Hue+  
Other
NZXT Grid+ V2 
  hide details  
Reply
post #9320 of 10534
Quote:
Originally Posted by Madmaxneo View Post

The only sliders I see on Precision X are the Power target, GPU temp target GPU temp target, GPU clock offset, and Mem clock offset. Would it be just the GPU clock off set I adjust or do I need to also slightly adjust the others?

Yeah, start increasing the GPU clock offset. You can probably start off around +78 and if it is stable keep increasing in +13 MHz increments until you get it to crash.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA GTX 980 Owner's Club