Overclock.net › Forums › Intel › Intel Motherboards › [Official] ASUS X99-E WS Owner's thread
New Posts  All Forums:Forum Nav:

[Official] ASUS X99-E WS Owner's thread - Page 312

post #3111 of 4083
Thanks for the details, I did bump up the system agent voltage by a tiny bit but will see if I can push it further slightly, your post has more helpful details so will mess around with the settings.

Using Bios 3101 but board is Revision 1.xx which is odd. It is indeed odd as going into the BIOS on the right hand side which has base clocks, memory and voltages, the 3200 Mhz is pulling through as is the 1.35 volts on Ram voltages. Guess its just a matter of messing around. Like yourself 2800 manually or when I did use XMP pre-set profile for 3000 Mhz, they were pulling through fine, just puzzling to determine why 3200 Mhz is not in Intel Extreme Utility but is in most places! Also the Command Prompt get Memory Speed check seem to suggest all Dimms are at 2133 mhz. Hmmmm

Ahhh yes NB clocks are low for now, normally cache is @ 4400, but Lowest value is on Auto. Screenshot was with no load so was running at base speed then.

Appreciate the help once again, off I adventure
Edited by Radox-0 - 6/17/16 at 7:43am
     
CPUMotherboardGraphicsGraphics
7980xe ASUS ROG Rampage vi GTX 1080Ti GTX 1080Ti 
GraphicsRAMHard DriveHard Drive
GTX 1080Ti Corsair Dominator Platinum DDR4 Samsung 850 Evo Crucial MX100 
Hard DriveHard DriveHard DriveCooling
Samsung 850 Evo Crucial MX100 960 Pro Custom Loop 
OSMonitorKeyboardPower
Windows 10 Asus ROG Swift PG348Q Corsair K95 RGB HX1200i 
CaseMouse Pad
In Win Tou Corsair Schimitar 
CPUMotherboardGraphicsRAM
4960k ASUS z97 Maximus Impact R9 Nano Hyper X Fury 
Hard DriveHard DriveCoolingOS
Samsung 850 Evo Samsung 850 Evo Custom Loop Windows 10 Pro 
MonitorKeyboardPowerCase
LG OLED TV LG 55EC930V Logitch K800 Silverstone 500w SFX Lian Li PC-05S 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
7980xe ASUS ROG Rampage vi GTX 1080Ti GTX 1080Ti 
GraphicsRAMHard DriveHard Drive
GTX 1080Ti Corsair Dominator Platinum DDR4 Samsung 850 Evo Crucial MX100 
Hard DriveHard DriveHard DriveCooling
Samsung 850 Evo Crucial MX100 960 Pro Custom Loop 
OSMonitorKeyboardPower
Windows 10 Asus ROG Swift PG348Q Corsair K95 RGB HX1200i 
CaseMouse Pad
In Win Tou Corsair Schimitar 
CPUMotherboardGraphicsRAM
4960k ASUS z97 Maximus Impact R9 Nano Hyper X Fury 
Hard DriveHard DriveCoolingOS
Samsung 850 Evo Samsung 850 Evo Custom Loop Windows 10 Pro 
MonitorKeyboardPowerCase
LG OLED TV LG 55EC930V Logitch K800 Silverstone 500w SFX Lian Li PC-05S 
  hide details  
Reply
post #3112 of 4083
This has been driving me crazy the past couple of months, but does anyone else have issues with software fan control? I'm using SpeedFan which works, but the problem is that every time the PC loses power, in order to regain fan control again, I have to go into the BIOS->Monitor-> Turn my fans to PWM control and then back to off, and then restart. After this it lets SpeedFan control the speed again. Does anyone have a solution for this? It's really annoying to have to repeat this every time the power goes out.
post #3113 of 4083
Quote:
Originally Posted by Halogamer2145 View Post

This has been driving me crazy the past couple of months, but does anyone else have issues with software fan control? I'm using SpeedFan which works, but the problem is that every time the PC loses power, in order to regain fan control again, I have to go into the BIOS->Monitor-> Turn my fans to PWM control and then back to off, and then restart. After this it lets SpeedFan control the speed again. Does anyone have a solution for this? It's really annoying to have to repeat this every time the power goes out.

does speedfan auto-start up when you load windows? maybe try saving your setting in speedfan then reboot?

try disable speedfan auto-start? then load it up after windows has started, see if that help

4 pin fans are PWM, 3 pin fans are DC, i don't use speedfan never got the hang of the thing i.e never worked

another option i could suggest is Aisuite no auto-start, load it up then into fan setting do your do in there, reboot and try speedfan again

you can always set the fans up manual in the bios smile.gif then try speedfan again if that blows your goat thumb.gif
Edited by baconinabun - 6/18/16 at 2:31am
post #3114 of 4083
hi I've had the same problem a few of you had over the last week or so trying to update to the newest BIOS but both in Windows and the BIOS flash utility tells me the BIOS image is not proper version or some such stuff.

Any trick to getting this BIOS updated? I'm on 1301 right now. 3101 seems to not want to flash.
post #3115 of 4083
I have some issues with my mobo freshly installed, the motherboard can't complete post when PCIE Gen3 is activated in BIOS.Q-Code shows 96 and stucks there.When Gen2 is activated, the PC boots just fine(GPU-Z shows PCIE2.0x16 at x16 2.0). Also i booted once with only 24GB RAM of 32. BIOS is at default settings.Please check specs below:

Mobo: ASUS X99 WS/IPMI
CPU : Xeon 1650 v3
GPU :ASUS Matrix 780Ti
RAM : Crucial Ballistix Elite 2666 8x4GB
PSU : EVGA 750P2

Are the issues purely from BIOS ?
post #3116 of 4083
Quote:
Originally Posted by desertpowa View Post

hi I've had the same problem a few of you had over the last week or so trying to update to the newest BIOS but both in Windows and the BIOS flash utility tells me the BIOS image is not proper version or some such stuff.

Any trick to getting this BIOS updated? I'm on 1301 right now. 3101 seems to not want to flash.
I had to install the BIOS updates one-by-one to get from 1302 to 3101, rebooting after each one.

1301 -> 1302 -> 2009 -> 3004 -> 3101

Slow but it worked fine.
post #3117 of 4083
Its been a while but for the longest time I have not been able to get the machine to sleep correctly. I figured it was due to my corrupted windows install so i reinstalled and its still not working when I sleep it does (Power light is flashing) but then when i hit the power button to wake up it seems goes thru the complete post sequence.
post #3118 of 4083
What RAM are people using on the X99-E WS/3.1? I have a 3.1WS board and looking for 32/64 kit maybe to fill the slots up. What are people getting out of the board speed wise? Any replies would be appreciated. Cheers
post #3119 of 4083
Quote:
Originally Posted by ezzmonster87 View Post

What RAM are people using on the X99-E WS/3.1? I have a 3.1WS board and looking for 32/64 kit maybe to fill the slots up. What are people getting out of the board speed wise? Any replies would be appreciated. Cheers

im using this kit,but it is because its the only kit that I can get in my country,for some strange reason. This was before the updated qvl.
Corsair Dominator Platinum DDR4 32gb 2800(CMD32GX4M4A2800C16)
post #3120 of 4083
Nice one cheers. I'm looking for a Kit not sure what to go for but looks like it will be a Corsair as they make the best looking kit IMO with their dominator range.

Just don't know if there's a higher rated speed that works that's higher than 2800MHz.

Cheers for the reply man.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] ASUS X99-E WS Owner's thread