Overclock.net › Forums › Cooling › Air Cooling › needs some help here
New Posts  All Forums:Forum Nav:

needs some help here

post #1 of 4
Thread Starter 
ok so i have a few fans with this setup of connections http://www.frozencpu.com/images/products/main/fan-809_3.jpg so what i need to know is do i have to change anything to connect it too my Lamptron FC5V3 fan controller that i have coming
post #2 of 4
Quote:
Originally Posted by adic View Post

ok so i have a few fans with this setup of connections http://www.frozencpu.com/images/products/main/fan-809_3.jpg so what i need to know is do i have to change anything to connect it too my Lamptron FC5V3 fan controller that i have coming
To start with for each fan you connect to your controller you will need a Male molex to 3 pin fan connector. You may need some 3pin fan extentions also.
post #3 of 4
Thread Starter 
So could I cut those 4 pin molex connections off and shorten the wire's coming out of the fans And put just a 3 pin connection
post #4 of 4
Thread Starter 
Anyone
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › needs some help here