Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › [Official] NVFlash with certificate checks bypassed for GTX 950/960/970/980/980Ti/Titan X
New Posts  All Forums:Forum Nav:

[Official] NVFlash with certificate checks bypassed for GTX 950/960/970/980/980Ti/Titan X - Page 48

post #471 of 912
Thread Starter 
Quote:
Originally Posted by PedroC1999 View Post

Can anyone here modify a BIOS or provide one with a higher power limit for my 980ti?

If you have a Gigabyte check the link in my sig I can help otherwise check the owner's club for your GPU. smile.gif
post #472 of 912
Sorry if i missed it somewhere, but i am looking for bios for my Gigabyte 980 ti which is not G1 but the WF3OC one with 1064Mhz base 1152Mhz boost and i want really save bios for that card my power limit cannot go higher then 104%
Laithan help me please i am noob at this and sow you know things smile.gif
post #473 of 912
Thread Starter 
Quote:
Originally Posted by NikolayNeykov View Post

Sorry if i missed it somewhere, but i am looking for bios for my Gigabyte 980 ti which is not G1 but the WF3OC one with 1064Mhz base 1152Mhz boost and i want really save bios for that card my power limit cannot go higher then 104%
Laithan help me please i am noob at this and sow you know things smile.gif

Yes check my thread in my sig, we can help you over there. The G1 BIOS is 100% compatible with your GPU we just need to figure out which version you need smile.gif
post #474 of 912
Ty bro your awesome smile.gif
post #475 of 912
Anyone know how to fix this?

I flashed a BIOS on my Ln2 mode switch on my 980 TI Matrix, but it screwed stuff up in the process. I used the correct BIOS according to the thread on HWBOT, the Samsung Ln2 BIOS "Elmor" released. ( The card has Samsung on it)

Did the same thing I always do before flashing, disable GPU in nvflash, then cmd prompt nvflash -6 BIOSNAME.rom and went through the prompts. Then restart re-enable card etc.


Now the card is throwing up loads of issues, no display output on boot, so no BIOS splash screen etc. Once I get to windows it will load NV Driver and give display output, but GPU Tweak 2 was giving me an error saying "BIOS load fail" and not opening. I could wait ages and eventually get GPU Tweak 2 to open and benchmark & play games etc, but upon reboot, no display output at all. I'd have to go back to normal BIOS mode, boot up then power down, go back to Ln2 switch and boot up again.


I tried flashing back over the BIOS with a new one, but I get this error:



Tried everything I can think of, using GPU as secondary card, DOS, and 3 different BIOS for my card. I also tried using the "safe mode" button on the card, that re-flashes the STOCK BIOS, but that doesn't work either. It gives me a "recovery fail" error.

post #476 of 912
Thread Starter 
post #477 of 912
Quote:
Originally Posted by Laithan View Post

See here


Can I do that with just 1 extra GPU? Or do I 100% need 2 extra GPU + the 980 TI?

And the 980 TI has to be the main display out?
post #478 of 912
Quote:
Originally Posted by Laithan View Post

See here


Tried with my Gtx 580 as the primary display output GPU, same error:

post #479 of 912
Thread Starter 
Type
NVFLASH --list

to show your GPUs. The first GPU in the system is GPU 0 the next is GPU 1 so you need to specify the other GPUs

--index=1
or
-i1

Command would be
NVFLASH -6 -i1 nameof.rom
if the GPU you want to flash is GPU 1
post #480 of 912
Quote:
Originally Posted by Laithan View Post

Type
NVFLASH --list

to show your GPUs. The first GPU in the system is GPU 0 the next is GPU 1 so you need to specify the other GPUs

--index=1
or
-i1

Command would be
NVFLASH -6 -i1 nameof.rom
if the GPU you want to flash is GPU 1


I had the 580 in Slot #3, it was my main display output, and the matrix 980 ti in slot #1. Did --list and 980 ti was #0, 580 was #1.
So I did -i0 etc, I got the exact same error as if I tried with just the Matrix 980 ti as a single GPU, so #0 gpu was definitely the 980 ti.

If NVFLASH refuses to update the BIOS, what difference would it make how many GPU's I have in the system, or which slot they're in ETC?
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › [Official] NVFlash with certificate checks bypassed for GTX 950/960/970/980/980Ti/Titan X