Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [build log] "Chessboard" SMA8
New Posts  All Forums:Forum Nav:

[build log] "Chessboard" SMA8 - Page 47

post #461 of 495
Thread Starter 
Quote:
Originally Posted by fast_fate View Post

eek.gifpuke.giffrown.gif
sozo.gif

What's up FF? You didn't like those fans on top? or the cable mess?
Edited by Gabrielzm - 7/24/15 at 2:48pm
post #462 of 495
Quote:
Originally Posted by Gabrielzm View Post

What's up FF? You didn't like those fans on top? or the cable mess?
If I may quote from you....
"the cable mess"
Everything inside is so neat and tidy, but this, well, just doesn't match the attention to detail that the rest of the build has redface.gif
post #463 of 495
Thread Starter 
Quote:
Originally Posted by fast_fate View Post

If I may quote from you....
"the cable mess"
Everything inside is so neat and tidy, but this, well, just doesn't match the attention to detail that the rest of the build has redface.gif

Yeah I agree. Will tidy up those cables. It happened because I have some bad contact on both leds and fans and also because I replaced the ultra low profile fans with those Parvrum. It end up with that mess. Point taken and organizing those now that everything is back to working condition again.
post #464 of 495
Quote:
Originally Posted by Gabrielzm View Post




here we go

Hi Gabe,

Speaking about this picture, it shows that the top radiator placed not symmetrically but have offset, right? May you measure how much is it?

I e what's the distance between middle line of case and middle line of radiator?

cheers.gif
post #465 of 495
Thread Starter 
Quote:
Originally Posted by rioja View Post

Hi Gabe,

Speaking about this picture, it shows that the top radiator placed not symmetrically but have offset, right? May you measure how much is it?

I e what's the distance between middle line of case and middle line of radiator?

cheers.gif

here we go mate. keep clicking on pic for high resolution. You can take all the measures that you want now. Ruler was centered on the MB midplate. It seems about 87 mm to me thumb.gif

2531400
post #466 of 495
Excellent thumb.gif

So I measured offset is near 8 mm
post #467 of 495
Quote:
Originally Posted by rioja View Post

Hi Gabe,

Speaking about this picture, it shows that the top radiator placed not symmetrically but have offset, right? May you measure how much is it?

I e what's the distance between middle line of case and middle line of radiator?

cheers.gif

Rioja, what are you thinking about mounting anyway? I don't remember if you said.
post #468 of 495
Quote:
Originally Posted by kgtuning View Post

Rioja, what are you thinking about mounting anyway? I don't remember if you said.

If I measured correctly and offset is really 8 mm, then this offset is enough to mount 560 on top

So I don't know why they didn't like it here

http://www.overclock.net/t/1458058/caselabs-announces-the-magnum-sma8/240_40#post_23076128
post #469 of 495
Thread Starter 
Quote:
Originally Posted by rioja View Post

If I measured correctly and offset is really 8 mm, then this offset is enough to mount 560 on top

So I don't know why they didn't like it here

http://www.overclock.net/t/1458058/caselabs-announces-the-magnum-sma8/240_40#post_23076128

You are talking to the right guy here. Kgtuning did a mod on his SMa8 to fit a 560 up there thumb.gif
post #470 of 495
Quote:
Originally Posted by Gabrielzm View Post

You are talking to the right guy here. Kgtuning did a mod on his SMa8 to fit a 560 up there thumb.gif

Yes I know thumb.gif

Btw when you made additional hole for 8-pin CPU cable here



Did u ever think about making third hole with the same oval shape as neighbors and place it in the middle between those two? And why u decided to make round to the end?
Edited by rioja - 7/26/15 at 11:58am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [build log] "Chessboard" SMA8