Actually, Yes! Update!
1. The LiHeat 250mm right angle PCIE 3.0 riser arrived last week and it was installed.
Because the riser touches the backside of the GPU and LiHeat indicated that it was slightly conductive, I did add vinyl. LiHeat's riser is less bendy/flexible than a DIY tinfoil tape/vinyl riser, but it took all the punishment I gave it. I have some pretty severe bends. It's working flawlessly. LiHeat generously shipped me three, so I have two extras stateside for those that might need them. Mert? iFreilicht?
2. Installed a Deep Silence 60mm NDS60-2000 - Link
- to help with GPU exhaust. It's highlighted upper right.
I also realized I could fit a 60mm x10mm fan in the space below the Deep Silence. I tried the MC600's included maglev 60mm fan. It moved good air, but was too loud (whine). Also it only had had 2-pin connector. So...
3. Ordered more fans which I will test.
A. GPU - Yate-Loon D12SM
-12C - Link
B. GPU - Deep Cool 120GS - Link
C. GPU Exhaust - Evercool EC6010M12CA 60mm x 10mm - Link
I'm especially excited about the Deep Cool 120GS. Never heard of it before. But it's made as a heatsink fan.
Fan B, the Yate Loon D12SM-12C is also no slouch. It's an upgrade from my current Yate Loon D12SL-12C at the expense of noise. But we can take it. Right now, the rig is pleasantly silent.
4. Added magnetic fan filters to the top.
Banana for scale.Edited by Runamok81 - 1/14/15 at 1:28pm