Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › Sli 980 Haf 945 custom water cooled
New Posts  All Forums:Forum Nav:

Sli 980 Haf 945 custom water cooled - Page 2

post #11 of 15
Is the water entering your rad at upper fitting?
post #12 of 15
Thread Starter 
yes, it comes from the res, the rad(upper fitting) then down to NB>CPU>Res.
post #13 of 15
Thread Starter 
OK so here we go, first off a complete list of components.
Mobo - Gigabyte Z87 LGA 1150 4 Way SLI Dual LAN ATX Motherboard (GA-G1.SNIPER 5)
CPU - Intel Core i7-4790K Processor (8M Cache, up to 4.40 GHz) (BX80646I74790K)
Ram - G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM 1600 (PC3 12800) Desktop Memory F3-1600C9D-16GXM (X2)
GPU1 - MSI Graphics Cards GTX 980 GAMING 4G
GPU2 - MSI Graphics Cards GTX 980 GAMING 4G
PSU - AZZA Titan 1000-Watt 80+ Bronze Power Supply
HDD1 - Samsung Electronics 840 Pro Series 2.5-Inch 256 GB SATA 6GB/s Solid State Drive
HDD2 - WD 4 TB WD Purple SATA III Intellipower 64 MB Cache
Case - Cooler Master HAF Stacker 935 Two-Piece Mod-Tower
Case- Cooler Master HAF Stacker 915R Mini-ITX Computer Case
Now onto the Cooler Components.
Reservoir - PrimoChill 240mm CTR Phase II D5 Enabled White POM - UV Green
Radiator1 - Swiftech MCR320-XP "eXtreme Performance" Radiator 360, 120mm x 3, Triple Fan
Radiator2 - Swiftech MCR320-XP "eXtreme Performance" Radiator 360, 120mm x 3, Triple Fan
CPU Block - EK Supremacy EVO Universal CPU Liquid Cooling Block - Acetal
Fans - 16 Corsair Air Series AF120 LED Quiet Edition High Airflow Fan Twin Pack - Purple
Fan Controller1 - NZXT Technologies Sentry 3 5.4-Inch Touch Screen Fan Controller
Fan Controller2 - Lamptron CW611 Water Cooling Controller 6CH X 36W LCD
also using 2 grid fan inputs, great little product, works great with the lamptron, not so much with the sentry
post #14 of 15
Thread Starter 
so having trouble getting my pictures to download from my phone, so might have to start that process tomorrow, my apologies, This is drawn out for suspense i promise, im very please with how this turned out!
post #15 of 15
Quote:
Originally Posted by ExpertFett View Post

yes, it comes from the res, the rad(upper fitting) then down to NB>CPU>Res.

I would have done it into the lower fitting - you might have an air lock in the rad.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › Sli 980 Haf 945 custom water cooled