Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] Project F1 Dream - Another level 10
New Posts  All Forums:Forum Nav:

[SPONSORED] Project F1 Dream - Another level 10 - Page 2

post #11 of 51
Thread Starter 
Quote:
Originally Posted by Sky-way View Post

Sub'd for sure. I have the only other case designed by BMW design group, the Asrock M8. I absolutely love the level 10 titanium and if I didn't care about size and had unlimited money, I would definitely be owning one. I also love F1 and can't wait to see more!

Thanks another update coming today
post #12 of 51
Thread Starter 
Another small update, decided to etch the radiator side as I received it in raw format (uncoated).

I changed the template style to something else, this is what I decided to go with

So time to wait for misses to go out, into the kitchen and get the tattoo power supply out and start working.

Now how I do this is dip some lady face cotton pads in salt water squeeze them out a bit (so they are damp not saturated) and then place them over stencil, then connect the negative to the rad and positive to copper plate and leave resting on pads (used bottle to keep it pressed slightly) left for 10 minutes on each side then swapped the negative and positive over to push some particles back into the etch.

Enough done into the metal with the 2014 world champions being deeper than the rest.

A Little rub down with a brillo pad to get rid of the surface stuff.

The Thermaltake’s upside down I know, but there will be a plaque placed over it, or filled in, not sure yet.

Leaving the particles on place in the etches, the reason for this is once I have painted the radiator as there not really solid in there I can scrape out the etched parts easier, then fill with black.

Rough example of what I am going for, that’s all for now will be back with more updates soon.
post #13 of 51
Subscribed for my interest in cars and the Thermaltake Level 10 Case. Beautiful job so far.
post #14 of 51
Thread Starter 
Quote:
Originally Posted by StoneTheRock View Post

Subscribed for my interest in cars and the Thermaltake Level 10 Case. Beautiful job so far.
thanks smile.gif
post #15 of 51
Looking forward to this, mate!
Dr. Octocore
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS M5A97 Sapphire HD 7870XT 2GB Corsair Vengeance 8GB DDR3 1600 Blue 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 Pro Seagate 1TB 7200rpm Old DVD-RW drive Corsair H60 2013 
OSMonitorKeyboardPower
Windows 10 Pro Asus MX279 Razer BlackWidow Ultimate OCZ ZT750 
CaseMouseMouse PadOther
Rosewill Blackhawk Razer Naga MOBA Red My desk Sennheiser HD600 headphones 
OtherOther
Thrustmaster TX Ferrari 458 Wheel Microsoft Xbox One controller 
  hide details  
Reply
Dr. Octocore
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8350 ASUS M5A97 Sapphire HD 7870XT 2GB Corsair Vengeance 8GB DDR3 1600 Blue 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 Pro Seagate 1TB 7200rpm Old DVD-RW drive Corsair H60 2013 
OSMonitorKeyboardPower
Windows 10 Pro Asus MX279 Razer BlackWidow Ultimate OCZ ZT750 
CaseMouseMouse PadOther
Rosewill Blackhawk Razer Naga MOBA Red My desk Sennheiser HD600 headphones 
OtherOther
Thrustmaster TX Ferrari 458 Wheel Microsoft Xbox One controller 
  hide details  
Reply
post #16 of 51
Thread Starter 
Quote:
Originally Posted by polishhammer83 View Post

Looking forward to this, mate!

Same here wish I had Adam Sandler remote to ffwd tongue.gif:p
post #17 of 51
Thread Starter 
doing a few more small bits today, but I thought i would share a rough render of the plan I have, there will be some differences in the final build (extras added) and the internals is not final.

Just wanted to wet your appetite with what i am trying to achieve.
rough%20render.jpg
post #18 of 51
Thread Starter 
So back again with a small update, Bloody model is still delayed and only ships from factory on April 4th, so why I am still waiting let’s take a look at what I could do why waiting first of a lovely donation from my sponsor Nvidia here is what arrived.

project-f1-dream-09_01.jpg


I got really lucky with this build and nvidia kindly sent me 2 x 980 GTX’s for the build, for more information on this card click here.
project-f1-dream-09_02.jpg

Here are the specs of each of the cards if you have not seen them

Specifications

Note: The below specifications represent this GPU as incorporated into NVIDIA's reference graphics card design. Graphics card specifications may vary by Add-in-card manufacturer. Please refer to the Add-in-card manufacturers' website for actual shipping specifications.

GTX 980 Engine Specs:

· 2048CUDA Cores
· 1126Base Clock (MHz)
· 1216Boost Clock (MHz)
· 144Texture Fill Rate (GigaTexels/sec)
· GTX 980 Memory Specs:
· 7.0 GbpsMemory Clock
· 4 GBStandard Memory Config
· GDDR5Memory Interface
· 256-bitMemory Interface Width
· 224Memory Bandwidth (GB/sec)

GTX 980 Technology Support:

· Yes (4-way)NVIDIA SLI® Ready
· YesNVIDIA G-Sync™-Ready
· YesNVIDIA GameStream™-Ready
· YesGeForce ShadowPlay™
· 2.0NVIDIA GPU Boost™
· YesDynamic Super Resolution
· YesMFAA
· YesNVIDIA GameWorks™
· 12 APIMicrosoft DirectX
· 4.4OpenGL
· YesCUDA
· PCI Express 3.0 Bus Support
· Windows 8 & 8.1, Windows 7, Windows Vista, Linux, FreeBSD x86OS Certification

Display Support:

· 5120x3200Maximum Digital Resolution*
· 2048x1536Maximum VGA Resolution
· Dual Link DVI-I, HDMI, 3x DisplayPort 1.2 Standard Display Connectors
· 4 displaysMulti Monitor
· YesHDCP
· InternalAudio Input for HDMI
· GTX 980 Graphics Card Dimensions:
· 4.376 inchesHeight
· 10.5 inchesLength
· Dual-widthWidth

Thermal and Power Specs:

· 98 CMaximum GPU Tempurature (in C)
· 165 WGraphics Card Power (W)
· 500 WMinimum System Power Requirement (W)
· 2x 6-pinsSupplementary Power Connectors

Will be following this with another post today as a very nice bitspower package turned up.
Edited by Richie123 - 3/28/15 at 6:27am
post #19 of 51
Thread Starter 
So following on from the card a small care package also turned up from Bitspower, all the stuff I needed and the blocks for the GPU’s.
project-f1-dream-09_03.jpg

Items were various connectors, more than shown in pictures, as well as 2 very very nice Nickel Finished In Golden reference 980 GTX blocks. I went for white back plates though so I could customise them like I have the GPU block, also got the pump heat sink and shroud for the build in white. You can view all of the Bitspower range here

So waiting on the model to cut the case, I decided to get the white back plates done why I was waiting, here is what I done in Photoshop.
project-f1-dream-09_04.jpg

So taking that design and laying it down was not as easy as I hoped, but after a few attempts on left over gold colour backplate this is what I was left with.
project-f1-dream-09_05.jpg

I am very happy with how they came out and the tie in with the CPU block well, I was going to add the red and yellow parts of the Lewis Hamilton 2014 helmet, but thought I have the tubing and fluid that will use that colour coordination anyway. Will be posting more regular updates as more and more bits arrive.
post #20 of 51
That's an awesome render, what software did you use?
STORMTIDE
(23 items)
 
   
CPUMotherboardGraphicsRAM
Intel i5 3570k 4.5GHz @1.272v MSI Z77A-GD55 EVGA GTX780Ti ACX 8GB Corsair Vengance LP 
Hard DriveHard DriveHard DriveCooling
64GB Crucial M4 x2 RAID0 500GB Seagate Barracuda 2TB Samsung Spinpoint EK Supremacy Plexi CSQ CPU Block 
CoolingCoolingCoolingCooling
EK FC-670GTX Plexi CSQ GPU Block x2 EK XT240 EK X3 250 Res Laing D5 Vario 
CoolingOSMonitorKeyboard
EK D5 Pump Top Plexi Windows 7 Ultimate 64bit 24" BenQ XL2420T CM Quickfire TK MX Browns 
PowerCaseMouseMouse Pad
Seasonic G Series 600W CM storm trooper Saitek R.A.T 5 Razer Goliathus Control Edition 
AudioAudioOther
Beyerdynamic DT990 Pro Schiit Modi/Magni Razer Naga Molten Edition 
CPUGraphicsRAMHard Drive
i5 3317U 640M 4GB DDR3 128gb crucial m4 
OSMouse
Windows 8 Pro 64bit Razer Naga Molten 
  hide details  
Reply
STORMTIDE
(23 items)
 
   
CPUMotherboardGraphicsRAM
Intel i5 3570k 4.5GHz @1.272v MSI Z77A-GD55 EVGA GTX780Ti ACX 8GB Corsair Vengance LP 
Hard DriveHard DriveHard DriveCooling
64GB Crucial M4 x2 RAID0 500GB Seagate Barracuda 2TB Samsung Spinpoint EK Supremacy Plexi CSQ CPU Block 
CoolingCoolingCoolingCooling
EK FC-670GTX Plexi CSQ GPU Block x2 EK XT240 EK X3 250 Res Laing D5 Vario 
CoolingOSMonitorKeyboard
EK D5 Pump Top Plexi Windows 7 Ultimate 64bit 24" BenQ XL2420T CM Quickfire TK MX Browns 
PowerCaseMouseMouse Pad
Seasonic G Series 600W CM storm trooper Saitek R.A.T 5 Razer Goliathus Control Edition 
AudioAudioOther
Beyerdynamic DT990 Pro Schiit Modi/Magni Razer Naga Molten Edition 
CPUGraphicsRAMHard Drive
i5 3317U 640M 4GB DDR3 128gb crucial m4 
OSMouse
Windows 8 Pro 64bit Razer Naga Molten 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sponsored Builds & Case Mods
Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] Project F1 Dream - Another level 10