Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] Deskbuild "Lost"
New Posts  All Forums:Forum Nav:

[SPONSORED] Deskbuild "Lost" - Page 50

post #491 of 683
Thread Starter 
26-02

Thoughts.
I came home at 17:10 "who cares i hear you think" it is the time when i end my daily shift at the firestation.
During the ride home i am thinking about my college and former army buddy who is in hospital "to much bad news lately". I park my car in front of the door and step out. I can smell the food "jammie". Dinner is not ready in 15 minutes so i ran upstairs "it is still lights outside" and i want to make a few pictures. I lay the windowframe on a towel avoiding scratches on the window. Where is my camera "O yes downstairs". I went down and grab my camera. I am upstairs again and want to turn on the camera. "Shi.........." the camera is already switched on. That means the battery pack is empty. Grrrr.
I guess dinnertime comes first. After the dinner i take out the battery from the loader and went upstairs. Time for som fun i think. It is probably the kick of seeing progress. "yes i agree it took me to long".


A few pictures then.

Let the pictures speak for it self. biggrin.gif











post #492 of 683
Thread Starter 
29-02 The first base for the bitspower double pomptop is almost finished.

What is left are drilling the led holes in the back.

I guess a patient job payed off.

The clear acrylic base is finished "just the led holes".




After measuring a few times the dimensions of the base and the mounted pomptop i markt the part where to place my jigsaw.
After that job i changed to stealth mode. biggrin.gif "a patient job measuring and sanding and measuring and sanding".



Protection film and marking tape still on. With my fingers i feel if i need to sand more. No perfect.



This time i just made a 1mm slope edge at the top. I like it.



Ha ha forgot to mention that i put 4 mm tread in the bottom and mounted 4 rubber dampers.



Tommorow i will drill a few holes in the back for the leds "yes more bleu".

Ill be back. gunner2.gif
post #493 of 683
Thread Starter 
02-03 making more holes for the cables "for the pomps".


A few pictures before i go to bed.

Drilling holes for the grommets.












"Yes almost bedtime". biggrin.gif
























Yes i like the color RED biggrin.gif
post #494 of 683
Wow its really coming together now! thumb.gif
post #495 of 683
Thread Starter 
Yes you can read my mind.

Slowly i am making progress and i enjoy it verry much.

For my mind it took me to long to build.
post #496 of 683
This build has been long, but accelerating quickly now! Damn that's some serious progress! I like how you overlay your panels with graph paper for measuring and drilling holes. Neat trick!
FireBox
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7 3820 Asus Rampage IV Gene Zotac GTX 980 x 2 16 GB Corsair Dominator Platinum CL9 
Hard DriveHard DriveHard DriveCooling
256GB ADATA S900 x 2 RAID0 3TB x 2 RAID1 1TB x 2 single storage Custom water loop 
CoolingCoolingOSMonitor
XSPC EX360 rads x 1 / AlphaCool Monsta 360 x 2 ... Dual D5 variable pumps Windows 7 64 bit SP1 Samsung 27" LED 
KeyboardPowerCaseMouse
Logitech G110 Corsair AX750 Case Labs Magnum M8 Logitech G500 
  hide details  
Reply
FireBox
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7 3820 Asus Rampage IV Gene Zotac GTX 980 x 2 16 GB Corsair Dominator Platinum CL9 
Hard DriveHard DriveHard DriveCooling
256GB ADATA S900 x 2 RAID0 3TB x 2 RAID1 1TB x 2 single storage Custom water loop 
CoolingCoolingOSMonitor
XSPC EX360 rads x 1 / AlphaCool Monsta 360 x 2 ... Dual D5 variable pumps Windows 7 64 bit SP1 Samsung 27" LED 
KeyboardPowerCaseMouse
Logitech G110 Corsair AX750 Case Labs Magnum M8 Logitech G500 
  hide details  
Reply
post #497 of 683
Thread Starter 
Quote:
Originally Posted by Bart View Post

This build has been long, but accelerating quickly now! Damn that's some serious progress! I like how you overlay your panels with graph paper for measuring and drilling holes. Neat trick!


He Bart,

Yes i finaly am working more and more on the build. Now that i am making progress i have more fun working longer on the build.
This is what i call building. All the extra things cost me much time.

Half of the building time is thinking how i am going to do it.
I think there is a angel above me telling me how to fix it because i often get a idee how to do things during my regular work.
Ha ha it also remind me that i forgot things.


The paper protect during the work on the desk and helps me measuring out the setup.
Until now it helpt me.

I think i remove it tommorow. Just a few holes for the base of the pomptop.

What can i say more "Crazy build". biggrin.gif

thumb.gif
post #498 of 683
Thread Starter 
03-03 Got the feeling that i must build.


I measured out the place for the two other reservoirs. And finished it.

Now i am working on the second 5mm black top for the bitspower double pomptop.

I hope that i can finish that tommorow.

I raised the feed under the reservoirs ± 1,5 cm. Below the reservoirs i want to place a ledstrip.
I got a few lengths of aluminium led mounting profiles.
So on one side i have to make a holes for the powercable for the ledstrip.

If i am going to use the profile then i make it black. I dont want to let it jump out when i see it.



Working on the front edge of the black top. A few hours sanding i thing.



Yes a warzone. I clean it up when the last double pomptop is mounted.

So more nice pictures this weekend "altho the want me to celabrate my birthday on sunday instead of monday".





Ill be back verry soon. gunner2.gif
post #499 of 683
This is beautiful. Shining the way forward to the bright future.
Workstation mk II
(16 items)
 
ASUS A73S
(16 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-4790K Gigabyte G1.Sniper 5 GTX 1080 8GB GB GTX 1080 8GB GB 
RAMHard DriveHard DriveCooling
G.Skill Ares 16GB 2133 dual channel kit Crucial 893 GB SSD 3x HGST 3TB SATA3 H110i v2 
OSMonitorKeyboardPower
Windows 10 Acer XB271HK FILCO Majestouch 2 EVGA Supernova 1300 80 gold 
CaseMouseMouse PadAudio
Corsair 900D Cougar 700M Mionix Sargas 400 Asus Xonar u7 
CPUMotherboardGraphicsRAM
Core i7 2670qm ASUSTeK K73SD GeForce 610M 8 GB Samsung 
Hard DriveOptical DriveCoolingOS
750 GB Hitachi HTS54somenumbers Matshita DVD-RAM UJ8B0AW Laptop cooling — snakey heatpipe, some heatsink... Windows 8 pro 
MonitorMonitorKeyboardPower
Some 17" 1600×900 glossy panel, not too shabby. LG Flatron W2343T Most keys are perfect square. A few elongated r... The AC/DC adapter makes a high-pitched sighing ... 
CaseMouseMouse PadAudio
Not slim. Nexus silent mouse Custom handmade Built in, some realtek crap. 
CPUMotherboardGraphicsRAM
Pentium® III-S 1.13 GHz Compaq ProLiant ML330 G2 ATI Rage XL/XC 2 GB Kingston 
Hard DriveHard DriveOptical DriveCooling
A couple 500GB SCSI II disks in raid 1. 120GB SCSI II disk HL-DT-ST DVD-RAM Stock. It’s noisy. 
OSPowerCaseAudio
Windows XP Pro SP 3 Some PSU I pulled out from under my bed. Compaq. Very genuine case. Some Legacy audio. 
OtherOther
Realtek RTL8169/8110 Gigabit ethernet NIC AMI MegaIDE raid controller 
  hide details  
Reply
Workstation mk II
(16 items)
 
ASUS A73S
(16 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7-4790K Gigabyte G1.Sniper 5 GTX 1080 8GB GB GTX 1080 8GB GB 
RAMHard DriveHard DriveCooling
G.Skill Ares 16GB 2133 dual channel kit Crucial 893 GB SSD 3x HGST 3TB SATA3 H110i v2 
OSMonitorKeyboardPower
Windows 10 Acer XB271HK FILCO Majestouch 2 EVGA Supernova 1300 80 gold 
CaseMouseMouse PadAudio
Corsair 900D Cougar 700M Mionix Sargas 400 Asus Xonar u7 
CPUMotherboardGraphicsRAM
Core i7 2670qm ASUSTeK K73SD GeForce 610M 8 GB Samsung 
Hard DriveOptical DriveCoolingOS
750 GB Hitachi HTS54somenumbers Matshita DVD-RAM UJ8B0AW Laptop cooling — snakey heatpipe, some heatsink... Windows 8 pro 
MonitorMonitorKeyboardPower
Some 17" 1600×900 glossy panel, not too shabby. LG Flatron W2343T Most keys are perfect square. A few elongated r... The AC/DC adapter makes a high-pitched sighing ... 
CaseMouseMouse PadAudio
Not slim. Nexus silent mouse Custom handmade Built in, some realtek crap. 
CPUMotherboardGraphicsRAM
Pentium® III-S 1.13 GHz Compaq ProLiant ML330 G2 ATI Rage XL/XC 2 GB Kingston 
Hard DriveHard DriveOptical DriveCooling
A couple 500GB SCSI II disks in raid 1. 120GB SCSI II disk HL-DT-ST DVD-RAM Stock. It’s noisy. 
OSPowerCaseAudio
Windows XP Pro SP 3 Some PSU I pulled out from under my bed. Compaq. Very genuine case. Some Legacy audio. 
OtherOther
Realtek RTL8169/8110 Gigabit ethernet NIC AMI MegaIDE raid controller 
  hide details  
Reply
post #500 of 683
Now take it all apart and sell me the desk thumb.gifbiggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sponsored Builds & Case Mods
Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] Deskbuild "Lost"