Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] Deskbuild "Lost"
New Posts  All Forums:Forum Nav:

[SPONSORED] Deskbuild "Lost" - Page 62

post #611 of 672
Thread Starter 
Quote:
Originally Posted by Bart View Post

Very cool stuff!! thumb.gifthumb.gif Always love to see machines get put to work!

Yes Bart finaly i reduce the bills of my needed parts.

I also made my own logo.









I bought 4 large boxes with cut pieces arylic. Together about 100 kg all 8mm thick.
So i have enough stuf to work with.
post #612 of 672
Thread Starter 
Monday morning i just got back from the firestation (1/2 shift).

It is time to get back to the deskbuild.
Yesterday i already removed the glaspannel with my son. It is not the weight (37kg) but the size wherefore i asked my son to help me.


What has to be don on the build:

- extensions (i going to change the color from bleu to ROG red);
- work on the baydrives (som file work for better fitting).

I also orderd a bunch of pci express and fan connectors for the extensions cables and for the fan harnas for TH-10.
"Yes pocket money allready spend for this week biggrin.gif

Som pictures.

Glaspanel against the wall.



Old cpu under the desk with large extension cables on it for testing.



Starting again with the build put my mind a large step back. I have to recheck thing because i dont know where i stopt.
And by lifiting som panels i see things i have to change.


Ha ha i also have to search where stored the other 4 Aquacomputer D-5 pomps. I am sure i have 10 of them in total.
To many drawers (21) with parts.


I am still working on the modcave.
I need a working table for testing an working on elektric parts.
post #613 of 672
Thread Starter 
I needed a few minutes to get the hang of it again for making crimps and sleeving.

Made the extensioncable twice. The second time i made it better.

I just tested the extension cable with my spare cpu. Yesterday i thought that i might have a problem with my icy docks because when i connect the power no fan was spinning. Today i found out that i first have to mount a ssd'in the tray before the fans starting up.

Temporary worktable. biggrin.gif
A bigger worktable is planed for later.
I first want the desk running.



All tools in hand reach.



After i mounted the extensioncable i want to see if the fans start up and the green led at front lights up.
Yes i am happy with the front view.
I mounted two old ssd's 320GB



I already tested both drives "all oke".
I notice that the grommet hole is a bit offline. The holes wherent planed in the drawings.
But still not bad. Something to think about for the next builds. biggrin.gif



Yes pizza time.
post #614 of 672
Awesome to see you back working on this desk Henry! Looking good!
FireBox
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7 3820 Asus Rampage IV Gene Zotac GTX 980 x 2 16 GB Corsair Dominator Platinum CL9 
Hard DriveHard DriveHard DriveCooling
256GB ADATA S900 x 2 RAID0 3TB x 2 RAID1 1TB x 2 single storage Custom water loop 
CoolingCoolingOSMonitor
XSPC EX360 rads x 1 / AlphaCool Monsta 360 x 2 ... Dual D5 variable pumps Windows 7 64 bit SP1 Samsung 27" LED 
KeyboardPowerCaseMouse
Logitech G110 Corsair AX750 Case Labs Magnum M8 Logitech G500 
  hide details  
Reply
FireBox
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7 3820 Asus Rampage IV Gene Zotac GTX 980 x 2 16 GB Corsair Dominator Platinum CL9 
Hard DriveHard DriveHard DriveCooling
256GB ADATA S900 x 2 RAID0 3TB x 2 RAID1 1TB x 2 single storage Custom water loop 
CoolingCoolingOSMonitor
XSPC EX360 rads x 1 / AlphaCool Monsta 360 x 2 ... Dual D5 variable pumps Windows 7 64 bit SP1 Samsung 27" LED 
KeyboardPowerCaseMouse
Logitech G110 Corsair AX750 Case Labs Magnum M8 Logitech G500 
  hide details  
Reply
post #615 of 672
Thread Starter 
Quote:
Originally Posted by Bart View Post

Awesome to see you back working on this desk Henry! Looking good!

Yes finaly. I am getting crazy not working on the desk.
post #616 of 672
Thread Starter 
Made the 4 pin extension for the Bottom Aquero.

Crimping is no problem. After cutting the paracord to short i know that i have to keep them a few cm on a meter longer.
Cutting off is better then gleuing a piece on. biggrin.gif

Ha ha today i found out that i made the other extension with the wires Scott send me from the states. I thought "he why do i have space between in the cablecomb". Now i no why the wire is a bit thinner.
No problem tho. The wire i use now are a bit thicker and the cablecombs fitting better.

So just one lage extension. To mount the extension in the black below the desk i want to use a brass pressnut M3 an then in the middle bteween the wires i put in a hex screw.
Still have to make the plates.

Sorry just one picture folks.


post #617 of 672
Glad to see you back at it Henry, was missing the "Oh"-ing and "Ah"-ing over your desk and the progess you've made smile.gif
Drags Main
(13 items)
 
HTPC
(13 items)
 
 
Reply
Drags Main
(13 items)
 
HTPC
(13 items)
 
 
Reply
post #618 of 672
Thread Starter 
Quote:
Originally Posted by Drags View Post

Glad to see you back at it Henry, was missing the "Oh"-ing and "Ah"-ing over your desk and the progess you've made smile.gif

Yes i am also glad to be back. To many changes made me take this long.
But i am glad to starting up again.

At the moment i am making new extension cables for the desk.
I already made a few but now that i make my one parts it is time to change the color in ROg colors (black and red).

Yesterday i made a drawing and toolpathfile for the cnc machine for making me a cablecomb for a 6 + 8 pin pci express cable.
After the first prototype i took a quick look if my measurements are correct.

Now that the size is oke i can do two badges of 25 pieces.




First badge i did yesterday evening.



I hope to make more progress the next few dayes.

gunner2.gif
post #619 of 672
Thread Starter 
After i posted the above cablecomb i got a advice to change the drawing and dont use the space between the two cable.

This ment that i trow away 75 pieces of the above type and made a few new ones today.

Yes Ali You are right about leaving the space part out.

Left side the ones with the space between the cables. Right side the just finished new ones.





Yes better i think 6 + 8 pin pci express. Of cource the above sleeving paracordt type III is just for the picture.

post #620 of 672
Thread Starter 
New parts for the build.

Now that i have my own cncrouter i can make parts that took me ages before.

It also pushed me back to the drawingboard.
For the power cable in the block i needed a few Cable Comb mounting plates. "yes i am going to make them myself". biggrin.gif

To be able to make them again when needed i have to document al the parts with the specs of the material i use and the tools that i use for making the. Yes designing takes much of my time.



The two parts mounted together.
I took the one of the extension cables to see if the fit well. Yes not bad.



After making a version V5 of the base i think i am ready for making a few more for the deskbuild and the black dragon build.



I have a polish machine to let them shine when i want to but for now i keep them this way.



I made thes out of a leftover piece of 5mm black acrylic.
This way i solved two problems. Cleaning up the scrap pieces and making new parts.



Now that the type III paracord fits perfect in the mount it is time to draw a few open Cable Combs for connecting two pci- express extension cable together. I think i am going to use the 3mm black panels for making them.

So more about these parts later today.

Ill be back gunner2.gif


I got a requist for a 24 pin. rolleyes.gif
Yes i have a few minutes for the guest arive. rolleyes.gif


Edited by TATH - 4/17/17 at 7:05am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sponsored Builds & Case Mods
Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] Deskbuild "Lost"