Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] Deskbuild "Lost"
New Posts  All Forums:Forum Nav:

[SPONSORED] Deskbuild "Lost" - Page 64

post #631 of 672
Thread Starter 
Ha ha i thought i cleant the panels. But on the pictures stil acrylic dust on it.
So today i mounted the main power cables in the side walls of the two pedestels. i had to cut a piece out at the back on the picture you see a blank spot. But that is already made black.
After the powercables i want to make the two front windows in the pedestels. In honor of my sponsors Bitspower and Thermaltake i made two windows with their logo in it.
I cant wait until i light up the fans inside the pedestels.
For that i have to make 2 extra extension cables in front of the pedestels. I want to make them tomorrow .
A few crapy pictures. 😉 Sorry

The routing from the powercable to the back. The blank spot is already black like the rest.
Happy with the result. And finaly som work finished.



For honor the two main sponsors i make a front window in the pedestels with their logo in it.
The router is runnint 10.000 rpm.



Work in progress.



The window panels are 8mm clear acrylic.
I dont make the logo's to big because i want to see inside when the fans light up.





And the right window "Thermaltake".




I am going to work on the spillter powercables (also in the pedestels) tomorrow to connect a few PA2's and the Aquero 6 pro.

Ill be back. gunner2.gif
post #632 of 672
Thread Starter 
New 24 pins extension cables.

I got up early this morning 07:15 hour. Time enough you think. It is now 18:24 and i just finished the updates on my fb - page.
What have i don i think !!! .

These two cables cost me at least a few hours work. Most of the time went in to polishing the Cable Combs on the polishing machine.
I am happy that i finished them in the right colors this time. biggrin.gif

Because i want them to be as good as posible i asked my friend Shaukat Ali for the right length of wires for these extension cables.
Afte making som wires without the pins on it i put them in to the connectors to see if the dimensions are oke.



Now that i know that the dimensions are the right one i can start cutting wires.

Much time going in to the polishing job of the Cable Combs. I want them to shine so that meaning a few hours polishing for the two cables.



Thes two are finished.









Time to make the pci express cables. biggrin.gif
post #633 of 672
Freakin phenomenal job!

#1 Huge win for such a beefy PC desk! thumb.gif
#2 Another big win in my book for those custom cables. biggrin.gif

I'm hoping my next build(DDCM Desk) turns out half as sexy as yours. First to lock in sponsorships.... then we work!

In the mean time.... subb'ed!
Night Shark
(15 items)
 
Humble Server
(12 items)
 
PFSense
(11 items)
 
CPUMotherboardGraphicsRAM
Phenom II X4 945 3.0Ghz Asus M5A88-V EVO Integrated ADATA 6GB 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital WD800 Western Digital WD3200 Hitachi Desktar 160GB Generic DVD RW 
CoolingOSPowerCase
Xigmatek Loki Ubuntu Server Raidmax RX 530W XCLIO A380BK 
CPUMotherboardGraphicsRAM
Athlon II X2 220 Dual Core 2.8Ghz GIGABYTE GA-MA785GM-US2H Integrated SAMSUNG 8GB 2x4GB PC2-6400 DDR2-800 240pin DIMM 
RAMHard DriveCoolingOS
CORSAIR XMS3 DHX 4GB (2 x 2GB) 240-Pin DDR3 SDR... WD 60GB WD600 Caviar Stock AM3 Fan PFSense 2.3 
PowerCaseOther
Generic 400W e Machine mATX Intel PRO NIC 
  hide details  
Reply
Night Shark
(15 items)
 
Humble Server
(12 items)
 
PFSense
(11 items)
 
CPUMotherboardGraphicsRAM
Phenom II X4 945 3.0Ghz Asus M5A88-V EVO Integrated ADATA 6GB 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital WD800 Western Digital WD3200 Hitachi Desktar 160GB Generic DVD RW 
CoolingOSPowerCase
Xigmatek Loki Ubuntu Server Raidmax RX 530W XCLIO A380BK 
CPUMotherboardGraphicsRAM
Athlon II X2 220 Dual Core 2.8Ghz GIGABYTE GA-MA785GM-US2H Integrated SAMSUNG 8GB 2x4GB PC2-6400 DDR2-800 240pin DIMM 
RAMHard DriveCoolingOS
CORSAIR XMS3 DHX 4GB (2 x 2GB) 240-Pin DDR3 SDR... WD 60GB WD600 Caviar Stock AM3 Fan PFSense 2.3 
PowerCaseOther
Generic 400W e Machine mATX Intel PRO NIC 
  hide details  
Reply
post #634 of 672
Quote:
Originally Posted by TATH View Post


My OCD frown.gif
post #635 of 672
Thread Starter 
Quote:
Originally Posted by Anateus View Post

My OCD frown.gif

What is OCD !!!rolleyes.gif
post #636 of 672
Thread Starter 
Bussy bussy,

Wires for the pci-express extension cables cut. But i did not start to make them today.
Modification on the dimensions of the countersink screwhole taking much of my time.
And i made a new bunch of them.
Time flies when you having fun i guess.

I also made a new type Cable Comb for the pci-express extension cables also.
Now i have to polish them then i can start making new cables.

On the front of the cable a 5mm Cable Comb and behind that thin 2 mm Cable Combs.
The part below is for my Asus Titan 6GB (3 + 4 pins).



Ill be back soon. gunner2.gif
post #637 of 672
I mean that window & logo look awesome, but the text under logo has different width between the words tongue.gif
post #638 of 672
Quote:
Originally Posted by Anateus View Post

I mean that window & logo look awesome, but the text under logo has different width between the words tongue.gif

and the Tt is not centered biggrin.gif

OCD - obsessive compulsive disorder
usually manifests itself as the need for order and symmetry (at least that is the case for myself and apparently Anateus)
post #639 of 672
Thread Starter 
I know that beside the logo is a copyright sign so that is inclusive the tt centered.
For the rest the program makes it. When i com home tommorow from nightshift at the firestation i will take a look.
Thanks for the help. If needed a new window is quickly made on my machine.

Because i cant sleep yet i took a quick look at the logo.



The tt has a extra c of copyright symbol right from it and the position has to be like this.
The line below also is written this way. Of cours it does not matter if i change it to look better this way.
Edited by TATH - 4/26/17 at 2:53pm
post #640 of 672
Thread Starter 
Finaly the first extension cable for the titans is finished.

i came home this morning from the firestation. Less sleep. But i still want to finish the cables.
I already made half of the extension cable "lets finish the". Working more hasty cous that i swapt the 8 pin with the 6 pin.
Grrrrrrrr stu...... fu......, mad.gif

I want to finsih the cables today.
I started cutting wires again "for the same card". This time i made no mistakes that i can see.
I am going to use the oter extension cable for the shorter cable.

It is already 20:45 and i want to play bf3 .

So i end with a few pictures.
The puzzle is getting smaller but i keep doing modifications when i want it.

Upcomming changes and modifications:
- Acrylic standard to guide the extension cable more away from the fan;
- Going to order a intel 750 ssd with a waterblock;
- The grommet at the 24 pin is going to be changed for a mild acrylic piece "looks better i think".


Tommorow again a extra **** so i am back saturday for more work on the desk.

I think one cable looks better then two next to eachother. But i want guide them more straight down in front of the fans.
There fore i make a custom bracket.









Dont go away i com back soon. biggrin.gif
Edited by TATH - 4/27/17 at 11:52am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sponsored Builds & Case Mods
Overclock.net › Forums › Case Mods & Cases › Sponsored Builds & Case Mods › [SPONSORED] Deskbuild "Lost"