Originally Posted by TheCautiousOne
Originally Posted by snef
Bitfenix spectre pro do the job on low fin rad, not the best but do the job
and they are very nice on aesthetic,
i've made some non-scientific test and spectre pro again SP120 performance edition @ same rpm (1200rpm) on Darkside thik Rad (64mm)
i dont see 1c delta.....but , if i set SP120 at 2350 rpm i have a bigger delta, but so noisy
seriously think most of the fan will do the job on low fin rad, just go with one you like more
here, IMO, Bitfenix are the best looking white fan on market, (i dont like enermax fan
That was the other choice because they have a variable adjust fan (1200, 1500, 1800 Rpm) and I just don't want to see enermax all over the place in my build you know?
The Cautious One
I'm not so keen on the "Enermax" logo all over the place either, but the golf ball look is just as much a turn off to me, and given my experience with bitfenix quality in general and especially with electricals, . . . . . I'll stay with the PWM Enemax, even for the ones in easy view.
My testing of the SP120's showed them to be grossly over rated and clearly beaten out by other fans at 2/3 the rpm when it came to pushing air thru a rad . . . and that's before adding their high noise level into the equation.