Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] CASELABS SMA8 Gunmetal/White Two Tone(2011-V3 Socket) The Division (COMPLETE)
New Posts  All Forums:Forum Nav:

[Build Log] CASELABS SMA8 Gunmetal/White Two Tone(2011-V3 Socket) The Division (COMPLETE) - Page 3

Poll Results: Would you Purchase a Caselabs Case?

 
  • 43% (184)
    Yes
  • 9% (41)
    No
  • 37% (159)
    If I had the Cash
  • 7% (31)
    SOON!!!
  • 2% (11)
    Im Just Here for the Comments
426 Total Votes  
post #21 of 1979
Thread Starter 
Quote:
Originally Posted by Gabrielzm View Post

Subbed. Will be following this for sure. I agree with Darlene. Each 980 will be at what 150 w? 200W? that is the same or higher that the x99 cpu. Just to give you an idea in the chessboard I have a 5960x at 4.5 GHz and is on the 560 loop. I got a delta of 2 C under gaming. In the sli titan loop (240+480) I got a delta of 5-6 C.

Yall Elaborate on the explanation of Delta T and what we are comparing. I've tried to follow that discussion but always get lost? I see the difference in ambient temp drops and fluxuation with warm air. I don't have a fluid temp gauge.

The Cautious One.

@Gabrielzm I followed the Chessboard also. Good Stuff and Congrats on the Finish!!
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #22 of 1979
Subbed. Can't wait to see how this comes together, and your color scheme sounds really interesting thumb.gif.
post #23 of 1979
Quote:
Originally Posted by TheCautiousOne View Post

Yall Elaborate on the explanation of Delta T and what we are comparing. I've tried to follow that discussion but always get lost? I see the difference in ambient temp drops and fluxuation with warm air. I don't have a fluid temp gauge.

The Cautious One.

@Gabrielzm I followed the Chessboard also. Good Stuff and Congrats on the Finish!!

well the mps 400 have an internal temp sensor but is usually inaccurate given you 3 or 4 degrees higher water temp that it actually is. So I use a bitspower end cap with temp probe built in. That way you can read the water/liquid temp on each loop. Having the external temperature (like for example the front 240mm rad with a probe there) will give you the capability of calculate the delta (difference) between your room temp and water temp. As the heat production in the loop goes up (gaming for example) due to stress so does the water temp. That would increase the delta. The larger delta in my example show you that two titans (even with more rad space) are producing a lot more heat that the cpu/ram blocks since both loops are under the same ambient temperature. I hope there is clear but if not just ask away. thumb.gif

thks about chessboard. Still need some finishes. I will be putting some glass/acrylic over the leds to dissapte the light and final pictures are not taken yet so...expect some updates in February. thumb.gif
Edited by Gabrielzm - 1/8/15 at 11:14am
post #24 of 1979
in like Flynn. subbed
post #25 of 1979
Thread Starter 
Quote:
Originally Posted by MadHatter5045 View Post

Subbed. Can't wait to see how this comes together, and your color scheme sounds really interesting thumb.gif.

Thanks! I believe I am going to like the contrast of colours. Gray/White with the Fluids being Green (For sure on the GPUS) and possibly clear for the Cpu OR (Yellow, Purple? )
Quote:
Originally Posted by Gabrielzm View Post

well the mps 400 have an internal temp sensor but is usually inaccurate given you 3 or 4 degrees higher water temp that it actually is. So I use a bitspower end cap with temp probe built in. That way you can read the water/liquid temp on each loop. Having the external temperature (like for example the front 240mm rad with a probe there) will give you the capability of calculate the delta (difference) between your room temp and water temp. As the heat production in the loop goes up (gaming for example) due to stress so does the water temp. That would increase the delta. The larger delta in my example show you that two titans (even with more rad space) are producing a lot more heat that the cpu/ram blocks since both loops are under the same ambient temperature. I hope there is clear but if not just ask away. thumb.gif

thks about chessboard. Still need some finishes. I will be putting some glass/acrylic over the leds to dissapte the light and final pictures are not taken yet so...expect some updates in February. thumb.gif

This is Interesting! I understand the Delta wording now. I will however Make note of where the temps are at with what I have planned for now. It will be the beginning of a great adventure.
Quote:
Originally Posted by vaporizer View Post

in like Flynn. subbed

Come on! Everyone is welcome, Enjoy the Ride!

THe Cautious ONe
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #26 of 1979
Subbed, looking interesting.

And about drilling those pass troughs, you can use that trick with light that JayzTwoCents used for his Skunkworks, if i remember correctly. Maybe it was also mentioned somewhere here on forums, but i am quite new here and havent stumbled upon it.

If you want and are not familiar with it, i can forward you that video. But it is just about using some light source, for example phone camera flash, to light trough the ports on gpus and when you center the light with that port, you get the exact point where to drill.
"Hobo King"
(21 items)
 
  
CPUMotherboardGraphicsGraphics
i5-2500k Asus P67 Sabertooth GTX 660 GTX 660 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu series Intel 320 series SSD Samsung 840 EVO WD Caviar Black 
Hard DriveOptical DriveCoolingMonitor
HGST 2,5" LG DVD-RW CM Hyper 612S BenQ GL2450 
MonitorKeyboardPowerCase
LG 17.3" laptop screen Cherry G84-4100 Corsair CX750M Fractal Design Define R4 
MouseMouse PadAudioAudio
Gigabyte M8000X Gigabyte GP-MP8000 Audio-Technica ATH-A700X FiiO D5 
Audio
ATH-AT9902 microphone 
  hide details  
Reply
"Hobo King"
(21 items)
 
  
CPUMotherboardGraphicsGraphics
i5-2500k Asus P67 Sabertooth GTX 660 GTX 660 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu series Intel 320 series SSD Samsung 840 EVO WD Caviar Black 
Hard DriveOptical DriveCoolingMonitor
HGST 2,5" LG DVD-RW CM Hyper 612S BenQ GL2450 
MonitorKeyboardPowerCase
LG 17.3" laptop screen Cherry G84-4100 Corsair CX750M Fractal Design Define R4 
MouseMouse PadAudioAudio
Gigabyte M8000X Gigabyte GP-MP8000 Audio-Technica ATH-A700X FiiO D5 
Audio
ATH-AT9902 microphone 
  hide details  
Reply
post #27 of 1979
Quote:
Originally Posted by Mark Huntsman View Post

Subbed, looking interesting.

And about drilling those pass troughs, you can use that trick with light that JayzTwoCents used for his Skunkworks, if i remember correctly. Maybe it was also mentioned somewhere here on forums, but i am quite new here and havent stumbled upon it.

If you want and are not familiar with it, i can forward you that video. But it is just about using some light source, for example phone camera flash, to light trough the ports on gpus and when you center the light with that port, you get the exact point where to drill.

neat idea thumb.gif although not always feasible I guess if you don't have an open end on a 90 degrees fitting for example. Would even be more accurate with a small laser beam like those talks/lecturer pointers. In any case I suggest you star with some of the 120 mm fan covers from the top just for practice. Also use a good step drill bit and you will get it right every time.
post #28 of 1979
Thread Starter 
Quote:
Originally Posted by Mark Huntsman View Post

Subbed, looking interesting.

And about drilling those pass troughs, you can use that trick with light that JayzTwoCents used for his Skunkworks, if i remember correctly. Maybe it was also mentioned somewhere here on forums, but i am quite new here and havent stumbled upon it.

If you want and are not familiar with it, i can forward you that video. But it is just about using some light source, for example phone camera flash, to light trough the ports on gpus and when you center the light with that port, you get the exact point where to drill.
Quote:
Originally Posted by Gabrielzm View Post

neat idea thumb.gif although not always feasible I guess if you don't have an open end on a 90 degrees fitting for example. Would even be more accurate with a small laser beam like those talks/lecturer pointers. In any case I suggest you star with some of the 120 mm fan covers from the top just for practice. Also use a good step drill bit and you will get it right every time.

I am going to wing it. Have all my parts in with the fittings in also. Have the tubing going down to where it touches the midplate at the exact point and make a cirlce (using a pencil) around the tubing to show the exact spot it touches. Drill hole and measure passthrough width, adjust as necessary.

What drill bit are yall using? I plan on bringing the midplate to my Dads house and using his tools, but Ill buy a drill bit with the sizes on it to help? Where do you find that?

THe Cautious One
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #29 of 1979
Those bitspower passtroughs at frozencpu.com are stated to have outer thread G3/8" and according to charts it is 16,662mm OD which translate roughly to 2/3" (16,933mm). (Sorry for using metric units, but i am more used to them as i live in europe.)

Edit: Closest inch drill bit size is 21/32 (16,66875mm).
Edited by Mark Huntsman - 1/8/15 at 1:10pm
"Hobo King"
(21 items)
 
  
CPUMotherboardGraphicsGraphics
i5-2500k Asus P67 Sabertooth GTX 660 GTX 660 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu series Intel 320 series SSD Samsung 840 EVO WD Caviar Black 
Hard DriveOptical DriveCoolingMonitor
HGST 2,5" LG DVD-RW CM Hyper 612S BenQ GL2450 
MonitorKeyboardPowerCase
LG 17.3" laptop screen Cherry G84-4100 Corsair CX750M Fractal Design Define R4 
MouseMouse PadAudioAudio
Gigabyte M8000X Gigabyte GP-MP8000 Audio-Technica ATH-A700X FiiO D5 
Audio
ATH-AT9902 microphone 
  hide details  
Reply
"Hobo King"
(21 items)
 
  
CPUMotherboardGraphicsGraphics
i5-2500k Asus P67 Sabertooth GTX 660 GTX 660 
RAMHard DriveHard DriveHard Drive
Kingston HyperX Blu series Intel 320 series SSD Samsung 840 EVO WD Caviar Black 
Hard DriveOptical DriveCoolingMonitor
HGST 2,5" LG DVD-RW CM Hyper 612S BenQ GL2450 
MonitorKeyboardPowerCase
LG 17.3" laptop screen Cherry G84-4100 Corsair CX750M Fractal Design Define R4 
MouseMouse PadAudioAudio
Gigabyte M8000X Gigabyte GP-MP8000 Audio-Technica ATH-A700X FiiO D5 
Audio
ATH-AT9902 microphone 
  hide details  
Reply
post #30 of 1979
Thread Starter 
Quote:
Originally Posted by Mark Huntsman View Post

Those bitspower passtroughs at ppcs are stated to have outer thread G3/8" and according to charts it is 16,662mm OD which translate roughly to 2/3" (16,933mm). (Sorry for using metric units, but i am more used to them as i live in europe.)

Edit: Closest inch drill bit size is 21/32 (16,66875mm).

+ Rep for the COnversion

Yall think something like this would Work?



Amazon Link

The Cautious One
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] CASELABS SMA8 Gunmetal/White Two Tone(2011-V3 Socket) The Division (COMPLETE)