Hi all, having a bit of a problem with RPM readings from my D5. I have the D5 connected to a molex for power and a PWM connected to the CPU fan header. I am getting no RPM readings at all even if I connect it to the CPU OPT header. I have tried to connect it to the other fan headers but still no RPM reading. I know the D5 is working as I can see the water moving and just aboyut hear it also my temps are very good in the low 20's. The D% PWM has a for pin connector with just two wires attached...cannot understrand why the RPM won't come up. I am using a Asus Maximus Hero VII motherboard and in Fan Expert no RPM readings will come up on any fan header that I attach the D5 to. Any assistance would be appreciated.
post #1 of 19
1/11/15 at 5:09am