today spent my time at my PC thinking an planing out the sleeving pattern and how to make a LED spotlight case, for illuminating the big S7 logo-Sleeving patern
Have decided on this pattern but it will involve me sleeving the came cable in 2 different colors, one color when going down from the PSU and then in a different color when it comes out of the bottom case and into the connector. This is because i want to have a symmetrical pattern all over the case where the cables will be visible. Cables will be mostly white with neon orange high lights.
The 24 pin and the 4 pin will come out the case and run in the grove along side the card mounts and then turn into the mobo once both clear the GPU. Will make some acrylic cable holders to they will end up looking nice and straight.
I'll sleeve any other cables in white so they will blend in, hope to get white mesh sleeving for the SATA cable, but think will have to by that over ebay as Slovenia dose not have such things to buy
As i was already at my PC decided to do a quick sketchup model of the LED spotlight. Ill use a white 5mm LED pointed to the S7 logo on the front of the case. Ill paint the back of the logo in orange so the letter will pop out and be also illuminated in the end. And will power the LED with a cable direct to the PSU via molex connector . Will try to make the spotlight casing tomorrow out of 3mm white acrylic and super glue it tougher