Bought this case and did NOT see a owners club, so I made one.
Some tips for people building.
Some tips for people building.
PRE THINK EVERYTHING if you want a clean build, the below tip about wrapping the 24 pin around came to my mind when thinking of using the MSI B85 where its awkward 24pin connector location, isn't so awkward in this case.
Semi modular or fully modular is a must in this case, SFX psus allow for a longer length video card to be installed.
There is a space behind and to the side of the PSU after it's installed. TAKE ADVANTAGE!
Wrap the 24 pin around the front of the PSU and down in front of the bottom 3.5 hard drive mount.Could also use this for SATA power.
I personally recommend grabbing a SATA to dual Molex ( like the one below) for the bottom hard drive mount as the way the SATA power cable goes in puts too much stress for the drive, for my liking.
This will plug into the drives using a single Molex connector and allowing little to no stress on the power SATA connector(Molex seem to be easier to hide as well)
Thats all for now.
Semi modular or fully modular is a must in this case, SFX psus allow for a longer length video card to be installed.
There is a space behind and to the side of the PSU after it's installed. TAKE ADVANTAGE!
Wrap the 24 pin around the front of the PSU and down in front of the bottom 3.5 hard drive mount.Could also use this for SATA power.
I personally recommend grabbing a SATA to dual Molex ( like the one below) for the bottom hard drive mount as the way the SATA power cable goes in puts too much stress for the drive, for my liking.
This will plug into the drives using a single Molex connector and allowing little to no stress on the power SATA connector(Molex seem to be easier to hide as well)
Thats all for now.