Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › GIGABYTE GTX 9xx H2O/AIR BIOS Tweaking ┌(ô益ô)┐
New Posts  All Forums:Forum Nav:

GIGABYTE GTX 9xx H2O/AIR BIOS Tweaking ┌(ô益ô)┐ - Page 560

post #5591 of 7491
Quote:
Originally Posted by saruth View Post

But mine is dp and I got 1675 with 1600/4001
screenshot?
post #5592 of 7491
Quote:
Originally Posted by Dutu40 View Post

Well,

it might just be my GPU being 77.0% ASIC but the BIOS flash didn't really do anything to increase my performance with the additional voltage, except unlocking CLK 74 boost table at 1531MHz core.

Safe to say even +30MHz OC over that gives red flashes of artifacts during 3Dmark11 testing.

At least the memory (Elpida) OC'd to 500MHz and 3Dmark11 didn't crash! Also added 4 fps on average, didn't try higher OC on the memory yet. But +500MHz on memory the performance gain was identical to +50MHz on the core clock (which was flashing all sorts of red during the benchmark).


Did you max the Sliders out ?



Edited by Kbird - 6/28/16 at 1:22pm
KB2
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99-A II EVGA 980Ti SC+ 6GB Corsair Vengenance 32GB @3000mhz 
Hard DriveHard DriveOptical DriveCooling
Samsung 960 EVO 500GB WD Black 640GB x3 in Raid 0 Array DVD RW Corsair H80i V2 Water Cooler On 980ti 
CoolingOSMonitorKeyboard
(3) x 200mm Case Fans Win10 (2) Benq BL3200 32" + (2) NEC 23" M$ Natural 
PowerCaseMouseMouse Pad
Corsair TX HAF 922 Logitech RB-22 Trackball Mionix SARGAS Desktop 
AudioOther
Onboard Arctic Cooling 240mm RAD on CPU 
  hide details  
Reply
KB2
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99-A II EVGA 980Ti SC+ 6GB Corsair Vengenance 32GB @3000mhz 
Hard DriveHard DriveOptical DriveCooling
Samsung 960 EVO 500GB WD Black 640GB x3 in Raid 0 Array DVD RW Corsair H80i V2 Water Cooler On 980ti 
CoolingOSMonitorKeyboard
(3) x 200mm Case Fans Win10 (2) Benq BL3200 32" + (2) NEC 23" M$ Natural 
PowerCaseMouseMouse Pad
Corsair TX HAF 922 Logitech RB-22 Trackball Mionix SARGAS Desktop 
AudioOther
Onboard Arctic Cooling 240mm RAD on CPU 
  hide details  
Reply
post #5593 of 7491
Yes I did.
post #5594 of 7491
Thread Starter 
Quote:
Originally Posted by Kbird View Post

If you are sure it is F2 then you are in the Group F1-F9 , so you would need this file from the 1st post :

http://www.overclock.net/attachments/32731

you can also get the official bios here and see the groupings

http://www.gigabyte.com/products/product-page.aspx?pid=5209#bios


get the NVFlash back a few pages posted by Laithan too ..ver 5.218


This is a correct answer thumb.gifapplaud.gif

Your MOD BIOS version would be F3 from the OP.



Quote:
Originally Posted by shiftoc View Post

Thank you, but just to clarify; looking at the official bios page, does the NVIDIA Source BIOS Version have to match my stock BIOS version? I have version 84.04.1F.00.B4, but I don't see this listed.

No they will almost never match, it's a different (newer) base BIOS from NVIDIA except when they make ONLY minor changes something like a fan setting because users complain about noise.



Quote:
Originally Posted by pfinch View Post

Hey Laithan,

thank you. Now flashed both BIOS versions 'correctly'.... noticed no difference but it feels correct now biggrin.gif


---
Another question:

I just bought Rise of the Tomb Raider. (WQHD,fullscreen, g-sync, all maxed out except of FXAA - instead SSAAx4. )
Thought that my machine could handle that game. But i get randomly strange random frame drops from 60+ to 30-40. Then I have to wait for entering a new zone or restarting game. Happens often in big areas (base camps).
Maybe the VRAM is too small ..all the time tomb raider takes 6000 MB Vram frown.gif

.. time to upgrade to 1080 with WQHD?!

i76700k 4.7ghz
32gb ram @ 3400mhz CL16
G1 GTX980 TI 1480/2000


You should not notice any difference at all other than the functionality works as expected with the display outputs wink.gif

Well done


PS. Tomb Raider is poorly optimized. I've watched it go from level to level and GPU memory usage just keeps climbing... almost like old textures are not purged or something... It's the only title I've even heard of that actually uses more than 6GB of GPU VRAM other than something crazy like 5k-8k resolutions.


Quote:
Originally Posted by Dutu40 View Post

Yes I did.

Start over, set sliders exactly like the screenshot above and test..

After successfully testing raise GPU core ONLY by +10Mhz. Repeat testing.

Raise another +10Mhz, repeat testing until you crash or get artifacts then reduce O/C down -20Mhz from there.

Use GPU-z to read speeds not O/C app.

See this post





thumb.gif
post #5595 of 7491
Hi guys, just wondering if you can help me out.

I've recently noticed that certain games and stress tests are causing my system to hard crash. Including the 4K Firestrike Ultra and recently the System Shock Remastered demo. High temps are not a problem for my SLI Gigabyte GTX 980 Ti G1 cards (temps are not exceeding 75 degrees on load). The crashes for the System Shock demo occur even if I underclock both cards. My PSU is a Corsair 1200AX and I'm beginning to suspect that it may be the culprit. I've been monitoring the voltages for the +12V rail and I'm getting a reading of 0.048V.

Any suggestions would be great as I don't want to commit to a PSU replacement unless it is absolutely necessary.
post #5596 of 7491
Hey everyone, thanks for the awesome thread.smile.gif


Question 1

I was just wandering if this is normal, and apologize for the extremely nooby question, but i own the Waterforce Edition 980ti and for the life of me, since flashing the MUMOD bios with stock setting with both voltage and power sliders maxed out, my gameplay is not stable at all and I'm always getting driver crashes.

Would it be possible that my card is just not stable at all at 1507Mhz ?

Even if i underclock to what i was getting on the stock bios, (1471Mhz) its still not stable at all. again as always voltage and power at max?


Question 2
I backed up my stock bios with NVFLASH and when i flash that backup rom its giving me a base clock of 1103Mhz, when im pretty sure it used to be 1215Mhz.

Was it a mistake to backup using NVFLASH and not GPU-Z?

GPU-Z kept on saying it cannot save the bios.

Did i have to disable it in Device manager first? Derp


Question 3

Could someone help me find the stock bios of the Waterforce as i have checked online and haven't found anything.



THANKS TO WHO EVER CAN HELP, IM KINDA SCARED I DO SOMETHING WRONG AND BRICK MY CARD derp
Edited by jackspadeza - 6/29/16 at 4:34am
post #5597 of 7491
Quote:
Originally Posted by ChemicalWorld View Post

Hi guys, just wondering if you can help me out.

I've recently noticed that certain games and stress tests are causing my system to hard crash. Including the 4K Firestrike Ultra and recently the System Shock Remastered demo. High temps are not a problem for my SLI Gigabyte GTX 980 Ti G1 cards (temps are not exceeding 75 degrees on load). The crashes for the System Shock demo occur even if I underclock both cards. My PSU is a Corsair 1200AX and I'm beginning to suspect that it may be the culprit. I've been monitoring the voltages for the +12V rail and I'm getting a reading of 0.048V.

Any suggestions would be great as I don't want to commit to a PSU replacement unless it is absolutely necessary.

Complete system crash would generally mean bad PSU, bad setting in motherboard bios or the motherboard itself
post #5598 of 7491
Quote:
Originally Posted by jackspadeza View Post

Hey everyone, thanks for the awesome thread.smile.gif


Question 1

I was just wandering if this is normal, and apologize for the extremely nooby question, but i own the Waterforce Edition 980ti and for the life of me, since flashing the MUMOD bios with stock setting with both voltage and power sliders maxed out, my gameplay is not stable at all and I'm always getting driver crashes.

Would it be possible that my card is just not stable at all at 1507Mhz ?

Even if i underclock to what i was getting on the stock bios, (1471Mhz) its still not stable at all. again as always voltage and power at max?


Question 2
I backed up my stock bios with NVFLASH and when i flash that backup rom its giving me a base clock of 1103Mhz, when im pretty sure it used to be 1215Mhz.

Was it a mistake to backup using NVFLASH and not GPU-Z?

GPU-Z kept on saying it cannot save the bios.

Did i have to disable it in Device manager first? Derp


Question 3

Could someone help me find the stock bios of the Waterforce as i have checked online and haven't found anything.



THANKS TO WHO EVER CAN HELP, IM KINDA SCARED I DO SOMETHING WRONG AND BRICK MY CARD derp

Could somebody please kindly upload a stock bios for GV-N98TXTREME W-6GD Thanks alot
post #5599 of 7491
Feel like a right idiot. I submitted an RMA to corsair for my PSU but the issue was resolved by moving from the F8L beta BIOS back to the F7 BIOS for my motherboard.

Haven't encountered any freezes since changing the BIOS *touch wood*
post #5600 of 7491

Testing 970 f51 how its looks.

Edited by dippadui - 6/29/16 at 10:10am
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › GIGABYTE GTX 9xx H2O/AIR BIOS Tweaking ┌(ô益ô)┐