Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › GIGABYTE GTX 9xx H2O/AIR BIOS Tweaking ┌(ô益ô)┐
New Posts  All Forums:Forum Nav:

GIGABYTE GTX 9xx H2O/AIR BIOS Tweaking ┌(ô益ô)┐ - Page 702

post #7011 of 7111
Quote:
Originally Posted by soslow View Post

GALAX HOF GTX 1080 TI

3x8 pins



I dont think it matters with the way pascal bios is **** blocked.
There is a voltage tool for ALL HOF cards.This card will probably have a huge TDP(if not shunt mod it) and using voltage tool you can change voltage.This card is made for more than extreme overclocking and will be expensive as hell.
post #7012 of 7111
They aint expensive depends where you are they are cheaper than the msi and asus variants.
post #7013 of 7111
Quote:
Originally Posted by soslow View Post

They aint expensive depends where you are they are cheaper than the msi and asus variants.
The 980Ti overkill 3x 8pin , 16+3phase cost 900€ back in the day.
post #7014 of 7111
Wrong the hof 980ti has two 8 pins and the price was 700-750 then again depends of the country.
post #7015 of 7111
Quote:
Originally Posted by soslow View Post

Wrong the hof 980ti has two 8 pins and the price was 700-750 then again depends of the country.
It was called 980Ti HOF LN2 GOC.
http://www.kfa2.com/kfa2/graphics-card/hof/kfa2-geforce-gtx-980-ti-hof-ln2-goc.html
I meant the overkill 980ti you see here not the normal.
post #7016 of 7111
That beast wasnt available for us humans.


Galax 980 Ti HOF LN2 GOC NVVDD HOF tool and XOC bios https://s3.amazonaws.com/download-aws.futuremark.com/OC+Gear_GOC_2015.rar


source: http://www.overclock.net/t/1476455/official-galax-galaxy-kfa2-hof-owners-club/2490




Edited by soslow - 4/23/17 at 2:43am
post #7017 of 7111
Thread Starter 
Quote:
Originally Posted by Minium View Post

Yo guys
I just did some voltage measuring on my 980Ti Xtreme Gaming.My card has a "normal" and a "LN2" bios using the LN2 switch.In my normal bios, the voltage is set to 1.3V but I measured 1.256V.Increasing the voltage in the bios didnt raise the measured voltage(@Laithan).Switching to the LN2 bios from gigabyte, the max voltage in the bios is 1.275V.Without using any tools, the measured voltage was 1.256V again.I was able to raise voltage slider in nvidia inspector to ~ +231mV but again I measured 1.256V.Since its an "LN2" bios and the card has an extra 6Pin connector,it makes no sense that the max voltage is 1.256V.I took a look at the PCB and maybe found something I (we) know from cards like 980Ti K|NGP|N edition.On the back of the PCB there are 2 potential things to solder together(connect) and potentially unlock fancy things.Without a way to unlock specific voltages this whole LN2 and extra 6-pin connector would make no sense at all.

I dont know if these 2 things are meant for that.I just looked at the PCB and thats the only potential thing I could find.

You've really got me wondering if the Xtreme cards are somehow voltage restricted.. but then again it does show you over 1.256v in software... hmmm..

Those areas you highlighted are curious looking.

Anyone know what they are for?


Quote:
Originally Posted by soslow View Post

GALAX HOF GTX 1080 TI

3x8 pins



I dont think it matters with the way pascal bios is **** blocked.

Me wants that! smile.gifdrool.gif

The 3rd PCIe power wouldn't be needed if we could MOD the BIOS but @ stock this might actually come in handy unless they've gimped the overall power (would be nice to know the values used in the BIOS).

Quote:
Originally Posted by soslow View Post

That beast wasnt available for us humans.


Galax 980 Ti HOF LN2 GOC NVVDD HOF tool and XOC bios https://s3.amazonaws.com/download-aws.futuremark.com/OC+Gear_GOC_2015.rar


source: http://www.overclock.net/t/1476455/official-galax-galaxy-kfa2-hof-owners-club/2490




Excuse me doing homework now smile.gif
post #7018 of 7111
Laithan the Galy triple 8-pin still has THE EXACT SAME POWER LIMT as other cards.To not hit power limit with max oc you´ll probably still need to shunt mod it.
post #7019 of 7111
Thread Starter 
Quote:
Originally Posted by Minium View Post

Laithan the Galy triple 8-pin still has THE EXACT SAME POWER LIMT as other cards.To not hit power limit with max oc you´ll probably still need to shunt mod it.

Perhaps a case of all show and no go....

frown.gif
post #7020 of 7111
Quote:
Originally Posted by Laithan View Post

Perhaps a case of all show and no go....

frown.gif
Its more meant for LN2 than everything else.They dont expect you to buy this card as a normal user.The air cooler on this thing is great and there will be a voltage tool for it.But the jet engine next to you will hold you back from running that OC 24/7 since a company will never make a GPU block for such a card.Maybe your lucky and galax/kfa² makes one.
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › GIGABYTE GTX 9xx H2O/AIR BIOS Tweaking ┌(ô益ô)┐